PLDS60-D-277A

For more information, please visit the product page. date 09/23/2014 page 1 of 7 SERIES: PLDS60 │ DESCRIPTION: LED DRIVER MODEL output voltage range1 min (Vdc) max (Vdc) PLDS60-A-277 6.5 12 PLDS60-B-277 13 24 19 36 26 48 output current Vout adjustment range2 Iout adjustment range2 output power ripple and noise3 efficiency (A) (Vdc) (A) max (W) max (mVp-p) typ (%) 5 10.8~13.2 3~5 60 120 87 2.5 21.6~26.4 1.5~2.5 60 120 88 1.67 32.4~39.6 1~1.67 60 120 89 1.25 43.2~52.8 0.75~1.25 60 120 90 N PLDS60-C-277 PLDS60-D-277 Notes: ED • over voltage, continuous short circuit, and over temperature protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 90% • suitable for LED lighting and signage applications U • • • • up to 60 W continuous power universal input range (90~305 Vac) single output dimming options: PWM, 1~10 Vdc, resistive, DALI power factor correction ≥ 0.9 cc and cv function low profile for easy installation IP67/IP65 rated TI • • • • N FEATURES 1. constant current region 2. adjustability option only available on IP65 rated models 3. ripple and noise are measured at 95% rated current, 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor on the output. O PART NUMBER KEY IS C PLDS60 - X - 277XXX Base Number Input Voltage 277 = (90~305 Vac) D Output Current A=5A B = 2.5 A C = 1.67 A D = 1.25 A cui.com Dimming PE = PWM, 1~10 Vdc, resistive D = DALI “blank” = no dimming IP Rating A = IP67 B = IP65 For more information, please visit the product page. CUI Inc │ SERIES: PLDS60 │ DESCRIPTION: LED DRIVER date 09/23/2014 page 2 of 7 INPUT conditions/description min voltage frequency current at 110 Vac, 59W at 230 Vac, 59W inrush current at 110/240 Vac, cold start, 25°C leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 60~100% load no load power consumption at 230 Vac max units 90 127 typ 305 420 Vac Vdc 47 63 Hz ED parameter 0.6 0.31 U OUTPUT 0.9 A mA 1.5 W max units current line regulation measured from high line to low line at 90% load ±1 % current load regulation measured from 10~90% load ±2 % ±5 % ±1 % 100 % % adjustability1 Vout Iout 60 TI at 90% rated current N conditions/description voltage accuracy typ 60 0.75 parameter constant current accuracy min A A ±10 switching frequency at 100% rated current 75 kHz start-up time at 90~305 Vac 2.5 s rise time at 90~305 Vac hold-up time at 115 Vac Notes: N temperature coefficient 50 ms 16 ms ±0.05 %/°C 1. adjustability option only available on IP65 rated models via built-in potentiometer PROTECTIONS conditions/description over voltage protection TVS clamp, auto recovery over current protection short circuit protection min O parameter typ max units hiccup mode hiccup mode, auto recovery 110 IS C over temperature protection °C SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output, for 1 minute input to ground, for 1 minute output to ground, for 1 minute min isolation resistance 100 safety approvals UL8750, IEC/EN61347-1, IEC/EN61347-2-13 DALI IEC62386-102, IEC62386-207 EMI/EMC EN55015, CISPR22, EN61547, EN61000-3-2 Class C (>60% load), EN61000-3-3, EN61000-4-2 Criteria A MTBF as per MIL-HDBK-217F, at 25°C, 115 Vac RoHS 2011/65/EU D typ cui.com max units 3,750 1,875 500 Vac Vac Vac MΩ 150,000 hours For more information, please visit the product page. CUI Inc │ SERIES: PLDS60 │ DESCRIPTION: LED DRIVER date 09/23/2014 page 3 of 7 ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves -40 -40 operating altitude max units 70 °C 85 °C ED storage temperature typ 2,000 vibration 15~2000 Hz, 60 min. along each X, Y, and Z axes 4 MECHANICAL parameter conditions/description min dimensions 8.15 x 1.575 x 1.102 (207 x 40 x 28 mm) G typ max inches 454 MECHANICAL DRAWING MODELS WITHOUT DIMMING INPUT WIRE CONNECTIONS Function ACL Blue ACN Green/ Yellow ACL(Brown) ACN(Blue) FG (Green/Yellow) FG Function Red Vo+ Black Vo- Vo+(Red) SJTW Vo-(Black) O Color SJTW 18AWG(0.75mm2 )x3C N OUTPUT WIRE CONNECTIONS TI Color g N units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified Brown units U weight m MODELS WITH DIMMING IS C units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified INPUT WIRE CONNECTIONS Color Function Brown ACL Blue ACN Green/ Yellow FG ACL(Brown) ACN(Blue) FG (Green/Yellow) SJTW 18AWG(0.75mm2 )x3C D OUTPUT WIRE CONNECTIONS Color Function Red Vo+ Black Vo- Blue DIM+/DA+ White1 DIM-/DA- 1 Note: 1. DALI models are marked with “DA” cui.com SJTW DIM+(Blue) DIM-(White) Vo+(Red) Vo-(Black) For more information, please visit the product page. CUI Inc │ SERIES: PLDS60 │ DESCRIPTION: LED DRIVER date 09/23/2014 page 4 of 7 DERATING CURVES PF vs. Output Current 1.00 0.99 45% 0.98 40% 0.97 80 THD 60 35% 0.96 Safe operating area 0.95 PF Load (%) 100 50 0.94 40 0.93 0.92 20 -20 0 20 40 50 60 70 80 65% 20% 9$& 15% 75% 85% 95% Output Current 80% 90% 100%     TI      Efficiency  9           9           Output Current Output Current Efficiency vs. Output Current (PLDS60-C-277) Efficiency vs. Output Current (PLDS60-D-277) IS C       Efficiency     9     9 9           9      9  O    N    9  D 70% Efficiency vs. Output Current (PLDS60-B-277)  Efficiency 60% N Efficiency vs. Output Current (PLDS60-A-277) Efficiency 5% 50% Output Current EFFICIENCY CURVES  100% U Ambient Temperature (°C)  9$& 25% 10% 0.90 50% 100 9$& 30% 9$& 0.91 -40 THD vs. Output Current 50% ED Temperature Derating Curve      Output Current      Output Current cui.com     For more information, please visit the product page. CUI Inc │ SERIES: PLDS60 │ DESCRIPTION: LED DRIVER date 09/23/2014 page 5 of 7 APPLICATION NOTES 1. Installation Instructions Power Output ACL (BROWN) VO+ (RED) VO(BLACK) ACN (BLUE) EARTH (GREEN/YELLOW) LED LIGHTING U Note: Output voltage of power supply must be higher than total forward voltage of series connecting LED. ED Direct Connection Dimming Connection N 0~100 kΩ resistance 1~10 Vdc voltage 10 V PWM signal Power Output DIM+ (BLUE) DIM(WHITE) ACL (BROWN) ACN (BLUE) VO+ (RED) VO(BLACK) LED LIGHTING 1. Output constant current can be adjusted through output cable by connecting 10~100 kΩ resistance, 1~10 Vdc, or 10 V PWM signal between DIM+ and DIM-. 2. Do not connect DIM- to V-. 3. The output will shutdown when dimming is less than 1 Vdc, 10 kΩ, or 10% PWM according to each dimming option. 1~10 Vdc Dimming Voltage 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Open 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% O Output Current N Notes: TI EARTH (GREEN/YELLOW) 10~100 kΩ Resistance Dimming Resistance 20K 30K 40K 50K 60K 70K 80K 90K 100K Open 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% IS C Output Current 10K 10~100% PWM (10V) Frequency range: 250~1000 Hz Duty Cycle 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Open Output Current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% D DALI Dimming Connection Meet OSRAM DALI MCU Controller Power Output DA+ (BLUE) DA(WHITE) ACL (BROWN) ACN (BLUE) VO+ (RED) VO(BLACK) EARTH (GREEN/YELLOW) Note: Output constant current can be adjusted through output cable by connecting DALI controller. cui.com LED LIGHTING For more information, please visit the product page. CUI Inc │ SERIES: PLDS60 │ DESCRIPTION: LED DRIVER date 09/23/2014 page 6 of 7 APPLICATION NOTES (CONTINUED) 2. Output Voltage/Output Current Adjustment ED For the PLDS60-X-277XXB models there are two potentiometers to adjust the output voltage/output current. Each potentiometer has 11 tick marks, please refer to the below diagram and tables for specific values. Maximum output power is 60W. A DETAIL VIEW ŊŰŶŵ ŗŰŶŵ 1 11 2 10 2 9 3 9 3 U 10 7 N 8 A 1 11 6 5 4 8 7 6 Output Current (Iout) PLDS60-A-277XXB PLDS60-B-277XXB PLDS60-C-277XXB PLDS60-D-277XXB 1 5.4A 2.6A 2.0A 1.33A 2 5.4A 3 5.1A 4 4.9A 5 4.6A 6 4.3A 2.0A 1.33A 2.5A 1.9A 1.27A 2.3A 1.8A 1.18A 2.2A 1.7A 1.14A 2.0A 1.5A 1.00A 3.9A 1.9A 1.3A 0.97A 3.5A 1.7A 1.2A 0.89A 9 3.2A 1.6A 1.1A 0.81A 10 2.9A 1.4A 0.9A 0.70A 1.3A 0.9A 0.70A PLDS60-C-277XXB PLDS60-D-277XXB O N 7 2.8A IS C Tick # D 2.6A 8 11 Note: TI Tick # PLDS60-A-277XXB Output Voltage (Vout) PLDS60-B-277XXB 1 10.6V 21.3V 31.6V 43.1V 2 10.6V 21.3V 31.6V 43.1V 3 10.9V 21.7V 32.2V 43.9V 4 11.1V 22.3V 33.2V 44.2V 5 11.3V 22.8V 34.1V 45.1V 6 11.6V 23.5V 35.2V 46.3V 7 12.0V 24.2V 36.4V 47.3V 8 12.5V 25.0V 37.5V 48.9V 9 12.8V 25.6V 38.8V 50.9V 10 13.1V 26.4V 40.0V 53.2V 11 13.3V 26.6V 40.3V 53.4V 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and 75% rated output load unless otherwise specified. cui.com 5 4 For more information, please visit the product page. CUI Inc │ SERIES: PLDS60 │ DESCRIPTION: LED DRIVER date 09/23/2014 page 7 of 7 REVISION HISTORY 1.0 description date initial release 09/23/2014 ED rev. D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.