PQP1-D12-S15-M

Additional Resources: Product Page | 3D Model | PCB Footprint date 11/22/2022 page 1 of 6 SERIES: PQP1-M │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • • wide 2:1 input range single and Dual output options 1500 Vdc isolation industry standard pin-out ultra compact SMD package short circuit protection (continuous) wide operating temp: -40°C to +85°C supports negative output (dual output model) designed to meet EN/BS EN 62368 MODEL input voltage output voltage output current output power ripple and noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PQP1-D12-S3-M 12 9~18 3.3 15 303 1 150 75 PQP1-D12-S5-M 12 9~18 5 10 200 1 150 77 PQP1-D12-S12-M 12 9~18 12 4 83 1 150 79 PQP1-D12-S15-M 12 9~18 15 3 67 1 150 80 PQP1-D12-S24-M 12 9~18 24 2 42 1 150 76 PQP1-D24-S3-M 24 18~36 3.3 15 303 1 100 75 PQP1-D24-S5-M 24 18~36 5 10 200 1 100 77 PQP1-D24-S12-M 24 18~36 12 4 83 1 100 78 PQP1-D24-S15-M 24 18~36 15 3 67 1 100 78 PQP1-D24-S24-M 24 18~36 24 2 42 1 100 77 PQP1-D12-D5-M 12 9~18 ±5 ±5 ±100 1 150 77 PQP1-D12-D9-M 12 9~18 ±9 ±2 ±56 1 150 80 PQP1-D12-D12-M 12 9~18 ±12 ±2 ±42 1 150 80 PQP1-D12-D15-M 12 9~18 ±15 ±1.7 ±33 1 150 77 PQP1-D24-D5-M 24 18~36 ±5 ±5 ±100 1 100 77 PQP1-D24-D9-M 24 18~36 ±9 ±2.8 ±56 1 100 77 PQP1-D24-D12-M 24 18~36 ±12 ±2.1 ±42 1 100 77 PQP1-D24-D15-M 24 18~36 ±15 ±1.7 ±33 1 100 77 Notes: 1. Ripple & noise testing condition at nominal input voltage and 5%-100% load, the “tip and barrel” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. PART NUMBER KEY PQP1 - DXX - XXX - M Base Number Input Voltage Output S = single D = dual cui.com Output Voltage Packaging Style SMT Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 2 of 6 INPUT parameter conditions/description input voltage 12 Vdc input models 24 Vdc input models start-up voltage 12 Vdc input models 24 Vdc input models surge voltage for maximum of 1 second 12 Vdc input models 24 Vdc input models filter capacitance filter current 12 Vdc input models 24 Vdc input models min typ max units 9 18 12 24 18 36 Vdc Vdc 9 18 Vdc Vdc 25 50 Vdc Vdc 108/15 54/6 112/30 56/12 mA mA typ max units ±0.2 ±0.5 ±0.5 ±1 ±0.5 ±1 ±2 ±3 ±5 -0.7 -0.7 OUTPUT parameter conditions/description line regulation min to max Vin positive output negative output min load regulation 5% ~ 100% load positive output negative output set-point accuracy 5% ~ 100% load positive outputs negative outputs ±1 ±3 switching frequency full load, nominal input 300 transient response 25% load step change ±3 temperature coefficient full load % % % % kHz ±5 % ±0.03 %/°C max units PROTECTIONS parameter conditions/description short circuit protection continuous, self-recovery min cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 3 of 6 SAFETY AND COMPLIANCE parameter conditions/description min isolation voltage input-output electric strength test for 1 minute 1500 typ isolation resistance input-output insulation at 500 Vdc 1000 isolation capacitance input-output capacitance at 100 KHz / 0.1 V safety approvals designed to meet 62368: EN, BS EN EMC CISPR32/EN55032 Class B (see recommended circuit) ESD IEC/EN61000-4-2, Contact ±6K, perf. Criteria B radiated immunity IEC/EN61000-4-3, 10 v/m, perf. Criteria A EFT/burst IEC/EN61000-4-4, ±2KV, perf. Criteria B (see recommended circuit) surge IEC/EN61000-4-5, line to line ±2KV, perf. Criteria B (see recommended circuit) conducted immunity IEC/EN61000-4-6 3 Vrms, perf. Criteria A RoHS yes MTBF MIL-HDBK-217F @ 25°C max units Vdc MΩ 100 pF 1000 kHours ENVIRONMENTAL parameter conditions/description min typ max units operating temperature -40 85 °C storage temperature -55 125 °C 5 95 % max units humidity non-condensing SOLDERABILITY parameter conditions/description min hand soldering 1.5 mm from case for 10 seconds 300 °C reflow soldering 60 s max over 217°C 245 °C DERATING CURVE cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 4 of 6 MECHANICAL parameter conditions/description dimensions 14 x 14 x 9 min case material Black plastic; flame-retardant and heat-resistant (UL94-V0) typ 2.2 MECHANICAL DRAWING units: mm [inches] tolerance: ± 0.50 [±0.020] PIN CONNECTIONS Single Dual 1 GND GND 4 Vin Vin 5 +Vo +Vo 6 NC 0V 7 0V -Vo units mm weight PIN max cui.com g Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 5 of 6 RECOMMENDED CIRCUITS Parameter Description Vin (Vdc) 12 24 Cin 47uF/25V 47uF/50V Vo (Vdc) 3.3, 5 12, 15, 24 Cout 100uF/6.3V 27uF/35V EMC COMPLIANCE CIRCUITS Parameter Description Part No. FUSE C0 Vin: 12 Vdc Vin: 24 Vdc slow blow, choose according to actual input current 1000µF/25V 680µF/50V C1 4.7µF/50V LDM1 15µH C2 4.7µF/50V C3 330µF/50V CY1 1nF/2KV C4 Refer to the Cout Fig.2 cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 03/28/2020 1.01 measurements updated 10/30/2020 1.02 derating curve and circuit figures updated 06/30/2021 CE certification removed 11/22/2022 1.03 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.