PQP3-D24-D12-M

Additional Resources: Product Page | 3D Model | PCB Footprint date 11/22/2022 page 1 of 6 SERIES: PQP3-M │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • • wide 2:1 input range single & dual output options 1500 Vdc isolation industry standard pin-out ultra compact SMD package short circuit protection (continuous) wide operating temp: -40°C to +85°C supports negative output (dual output model) designed to meet EN/BS EN 62368 MODEL input voltage output voltage output current output power ripple and noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PQP3-D12-S3-M 12 9~18 3.3 38 758 2.5 100 75 PQP3-D12-S5-M 12 9~18 5 30 600 3 100 79 PQP3-D12-S12-M 12 9~18 12 13 250 3 100 82 PQP3-D12-S15-M 12 9~18 15 10 200 3 100 83 PQP3-D12-S24-M 12 9~18 24 6 125 3 100 81 PQP3-D24-S3-M 24 18~36 3.3 38 758 2.5 100 74 PQP3-D24-S5-M 24 18~36 5 30 600 3 100 81 PQP3-D24-S12-M 24 18~36 12 13 250 3 100 83 PQP3-D24-S15-M 24 18~36 15 10 200 3 100 83 PQP3-D24-S24-M 24 18~36 24 6 125 3 100 83 PQP3-D12-D5-M 12 9~18 ±5 ±15 ±300 3 100 78 PQP3-D12-D9-M 12 9~18 ±9 ±9 ±167 3 100 78 PQP3-D12-D12-M 12 9~18 ±12 ±7 ±125 3 100 79 PQP3-D12-D15-M 12 9~18 ±15 ±5 ±100 3 100 79 PQP3-D24-D5-M 24 18~36 ±5 ±15 ±300 3 100 78 PQP3-D24-D9-M 24 18~36 ±9 ±9 ±167 3 100 80 PQP3-D24-D12-M 24 18~36 ±12 ±7 ±125 3 100 82 PQP3-D24-D15-M 24 18~36 ±15 ±5 ±100 3 100 81 Notes: 1. Ripple & noise testing condition at nominal input voltage and 5%-100% load, the “tip and barrel” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. PART NUMBER KEY PQP3 - DXX - XXX - M Base Number Input Voltage Output S = single D = dual cui.com Output Voltage Packaging Style SMT Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP3-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 2 of 6 INPUT parameter conditions/description input voltage 12 Vdc input models 24 Vdc input models start-up voltage 12 Vdc input models 24 Vdc input models surge voltage for maximum of 1 second 12 Vdc input models 24 Vdc input models filter capacitance filter current 12 Vdc input models 24 Vdc input models min typ max units 9 18 12 24 18 36 Vdc Vdc 9 18 Vdc Vdc 25 50 Vdc Vdc 338/50 165/40 mA mA -0.7 -0.7 321/30 156/20 OUTPUT parameter conditions/description typ max units line regulation min to max Vin min ±0.2 ±0.5 % load regulation 5% ~ 100% load ±0.5 ±1 % set-point accuracy 5% ~ 100% load positive outputs negative outputs ±1 ±3 ±3 ±5 % % switching frequency full load, nominal input 300 transient response 25% load step change ±2.5 temperature coefficient full load kHz ±5 % ±0.03 %/°C max units PROTECTIONS parameter conditions/description short circuit protection continuous, self-recovery min cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP3-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 3 of 6 SAFETY AND COMPLIANCE parameter conditions/description min isolation voltage input-output electric strength test for 1 minute 1500 typ isolation resistance input-output insulation at 500 Vdc 1000 isolation capacitance input-output capacitance at 100 KHz / 0.1 V safety approvals designed to meet 62368: EN, BS EN EMC CISPR32/EN55032 Class B (see recommended circuit) ESD IEC/EN61000-4-2, Contact ±6K, perf. Criteria B radiated immunity CISPR32/EN55032 EFT/burst IEC/EN61000-4-4, ±2KV, perf. Criteria B (see recommended circuit) surge IEC/EN61000-4-5, line to line ±2KV, perf. Criteria B (see recommended circuit) conducted immunity IEC/EN61000-4-6 3 Vrms RoHS yes MTBF MIL-HDBK-217F @ 25°C max units Vdc MΩ 100 pF 1000 kHours ENVIRONMENTAL parameter conditions/description min typ max units operating temperature -40 85 °C storage temperature -55 125 °C 5 95 % max units humidity non-condensing SOLDERABILITY parameter conditions/description min hand soldering 1.5 mm from case for 10 seconds 300 °C reflow soldering 60 s max 245 °C DERATING CURVE cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP3-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 4 of 6 MECHANICAL parameter conditions/description dimensions 14 x 14 x 9 min case material Black plastic; flame-retardant and heat-resistant (UL94-V0) typ 2.2 MECHANICAL DRAWING units: mm [inches] pin diameter tolerance: ± 0.10 [±0.004] tolerance: ± 0.50 [±0.020] PIN CONNECTIONS Single Dual 1 GND GND 4 Vin Vin 5 +Vo +Vo 6 NC 0V 7 0V -Vo units mm weight PIN max cui.com g Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP3-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 5 of 6 RECOMMENDED CIRCUITS Figure 1 Parameter Description Vin (Vdc) 12 24 Cin 47uF/25V 47uF/50V Vo (Vdc) 3.3, 5 12, 15, 24 Co 100uF/6.3V 27uF/35V EMC COMPLIANCE CIRCUITS Figure 2 Parameter Description Part No. Vo (Vdc) FUSE C0 C1 Vin: 12 Vdc 3.3 5 12 Vin: 24 Vdc 15 24 3.3 5 15 24 slow blow, choose according to actual input current 1000µF/25V 10µF/50V 680µF/50V 4.7µF/50V 10µF/50V LDM1 15µH C2 4.7µF/50V C3 330µF/50V CY1 1nF/2KV C4 Refer to the Cout Fig.2 Note: 12 4.7µF/50V For EMC tests we use Part ① in Fig. 3 for immunity and part ➁ for emissions test. Selecting based on needs. cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PQP3-M │ DESCRIPTION: DC-DC CONVERTER date 11/22/2022 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 03/28/2020 1.01 tolerance update to page 4 06/09/2020 1.02 derating curve and circuit figures updated 07/15/2021 CE certification removed 11/22/2022 1.03 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.