PRFE20W-O72-S15N-D

Additional Resources: Product Page | 3D Model | PCB Footprint date 06/09/2023 page 1 of 11 SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • 20 W isolated output ultra-wide 18:1 input range single/dual regulated outputs UL/EN 62368 certified meets EN 55032/55035/50155 with external circuits 4,200 Vdc isolation remote on/off wide operating temperature range (-40~105°C) MODEL input voltage output voltage output current output power ripple & noise1 efficiency2 max (W) max (mVp-p) typ (%) Vo1/Vo2 nom (Vdc) range (Vdc) (Vdc) max (A) PRFE20W-O72-S5-D 72 8.5~160 5 4.00 20 75 86 PRFE20W-O72-S12-D 72 8.5~160 12 1.67 20 100 89 PRFE20W-O72-S15-D 72 8.5~160 15 1.33 20 100 89 PRFE20W-O72-D12-D 72 8.5~160 ±12 ±0.83 20 100 89 PRFE20W-O72-D15-D 72 8.5~160 ±15 ±0.66 20 100 89 PRFE20W-O72-D24-D 72 8.5~160 ±24 ±0.41 20 100 90 Notes: 1. Peak to peak, 5Hz to 20MHz bandwidth, full load, 22µF aluminum solid capacitor and 1µF ceramic capacitor. 2. 72Vdc input voltage. PART NUMBER KEY PRFE20W - 072 - X XX X - D Base Number Input Voltage Output: S = single output D = dual output Output voltage cui.com REM On/Off Control: "blank" = positive logic N = negative logic Mounting Style: D = DIP Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER date 06/09/2023 │ page 2 of 11 INPUT parameter conditions/description min input voltage typ 8.5 max units 160 Vdc surge voltage for maximum of 0.1 second 200 Vdc current at 12 Vdc input voltage, full load 2.2 A 0.1 A2s 9.5 8 V V inrush current filter Pi filter positive logic remote on/off3 negative logic under voltage lockout Notes: models ON (4.0 ~160 Vdc or REM pin open circuit) models OFF (REM pin 0~1.2 Vdc) models ON (REM pin 0~1.2 Vdc) models OFF (4.0 ~160 Vdc or REM pin open circuit) turn on turn off 8.5 7 3. - Voltages referenced to -Vin pin. OUTPUT parameter conditions/description max units maximum capacitive load 5 Vdc output model 12 Vdc output model 15 Vdc output model ±12 Vdc output model ±15 Vdc output model ±24 Vdc output model min typ 6,800 3,300 2,200 820 680 330 μF μF μF μF μF μF voltage accuracy at 72 Vdc input voltage, full load, 25°C ±1.0 % line regulation from low line to high line, full load ±0.2 % load regulation from full load to no load single output double output ±0.2 ±1.0 % % switching frequency output ripple frequency transient recovery time 75% ~ 100%, nominal input voltage 250 μs transient response deviation 75% ~ 100%, nominal input voltage ±5 % temperature coefficient 40°C ~ 105°C ±0.02 %/°C adjustability single output output power ≤ max. rated power, via trim pin 15 % 200 cui.com -20 kHz Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER date 06/09/2023 │ page 3 of 11 PROTECTIONS parameter conditions/description min over current protection auto recovery, hiccup 110 typ max units 180 % over voltage protection 5 Vdc output model, zener clamp 12 Vdc output model, zener clamp 15 Vdc output model, zener clamp ±12 Vdc output model, zener clamp ±15 Vdc output model, zener clamp ±24 Vdc output model, zener clamp 6.2 15 18 ±15 ±18 ±30 Vdc Vdc Vdc Vdc Vdc Vdc over temperature protection shutdown recovery 110 92 °C °C short circuit protection continuous, auto recovery SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage input to output, for 2 seconds 3,000 4,200 Vac Vdc isolation resistance input to output isolation capacitance input to output; output to case safety approvals certified to 62368: UL/EN/IEC conducted emissions EN 55032 & EN 50155 Class A (with external filter) radiated emissions EN 55032 & EN 50155 Class A (with external filter) ESD EN 61000-4-2 Level 3: Air ±8kV, Contact ±6kV Perf. Criteria A radiated immunity EN 61000-4-3 Level 3: 80~1000MHz, 20V/m Perf. Criteria A EFT/burst EN 61000-4-4 Level 3: On power input port, ±2kV, external input capacitor required (EN 50155); Level 4: On power input port, ±4kV, external input capacitor required (EN 55035) Perf. Criteria A surge EN 61000-4-5 Level 4: Line to earth, ±4kV, Line to line, ±2kV (EN 50155); Level 4: Line to earth, ±4kV, Line to line, ±2kV (EN 55035) Perf. Criteria A conducted immunity EN 61000-4-6 Level 3: 0.15~80MHz, 10V Perf. Criteria A magnetic immunity EN 61000-4-8 Level 1: 50Hz, 1A/m for EN 55035:2017 Perf. Criteria A voltage dips and interruption EN 50155 Class S3: 20ms interruptions Perf. Criteria A MTBF as per MIL-HDBK-217F, 25°C 5 Vdc output model 12 Vdc output model 15 Vdc output model 24 Vdc output model RoHS yes 1,000 MΩ 20 pF 1,242 1,397 1,631 1,341 kHours kHours kHours kHours ENVIRONMENTAL parameter conditions/description min operating case temperature see derating curve storage temperature storage humidity non-condensing cui.com typ max units -40 105 °C -55 125 °C - 95 % Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER date 06/09/2023 │ page 4 of 11 MECHANICAL parameter conditions/description dimensions 2.00 × 1.00 × 0.40 [50.8 x 25.4 x 10.2 mm] min case material plastic, DAP, UL 94V-0 weight typ max units inch 28.5 g MECHANICAL DRAWING units: inch [mm] tolerances: inch: x.xx = ±0.02, x.xxx = ±0.010 mm: x.x = ±0.5, x.xx = ±0.25 pin diameter: 0.04 ±0.004 inch [1.0 ±0.1 mm] PIN Out PIN cui.com Single output Dual output Function Function 1 +Vin +Vin 2 -Vin -Vin 3 +Vo +Vo 4 Trim -Vo 5 -Vo Common 6 Remote Remote Additional Resources: Product Page | CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER 3D Model | PCB Footprint date 06/09/2023 │ page 5 of 11 DERATING CURVES EFFICIENCY CURVES cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER 3D Model | PCB Footprint date 06/09/2023 │ page 6 of 11 EFFICIENCY CURVES (CONTINUED) cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER 3D Model | PCB Footprint date 06/09/2023 │ page 7 of 11 EFFICIENCY CURVES (CONTINUED) cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER 3D Model | PCB Footprint date 06/09/2023 │ page 8 of 11 EFFICIENCY CURVES (CONTINUED) cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER | PCB Footprint date 06/09/2023 │ page 9 of 11 APPLICATION NOTES Figure 1 Note: 3D Model RTRIM: External resistor in kΩ VOUT, NOM: Nominal output voltage VOUT: Desired output voltage cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER date 06/09/2023 │ page 10 of 11 INPUT FUSING AND SAFETY CONSIDERATION The PRFE20W-D series converters have no internal fuse. In order to achieve maximum safety and system protection, always use an input line fuse. We recommended a 3.15A time delay fuse for all models. It is recommended that the circuit have a transient voltage suppressor diode (TVS) across the input terminal to protect the unit against surge or spike voltage and input reverse voltage (as shown). The external TVS & input capacitor (Cin) is required if PRFE20W-D series has to meet EN61000-4-4 & EN61000-4-5 The PRFE20W-D series recommended a TVS & aluminum capacitor (120µF/220V) to connect parallel. Figure 2 EMC CONSIDERATIONS Figure 3 Note: EMI Test standard: EN55032 Class A, EN50121-3-2 Test Condition: Input Voltage: 110Vdc, Output Load: Full Load (1) EMI meet EN55011 / EN55032 / EN50121-3-2 Table 1 MODEL NUMBER C1 / C2 / C3 C4 CY1 CY2 / CY3 CY4 / CY5 L1 L2 1500pF 400Vac Y1 capacitor 2200pF 400Vac Y1 capacitor 1.4mH Ø0.4mmx1/13T ACME A151 T10x5x5C 10µH/7A 2525CZ Vishay PRFE20W-O72-S5-D PRFE20W-O72-S12-D PRFE20W-O72-S15-D PRFE20W-O72-D12-D PRFE20W-O72-D15-D 1µF/250V 1812 Ceramic capacitor 120µF/220V KXJ Series Aluminum capacitor 680pF 400Vac Y1 capacitor 470pF 400Vac Y1 Capacitor PRFE20W-O72-D24-D cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRFE20W-D │ DESCRIPTION: DC-DC CONVERTER date 06/09/2023 │ page 11 of 11 REVISION HISTORY rev. description date 1.0 initial release 05/19/2022 1.01 remote on/off updated 10/11/2022 1.02 output voltage trimming updated 06/09/2023 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.