PRMC3-D12-S5-S

Additional Resources: Product Page | 3D Model | PCB Footprint date 12/06/2022 page 1 of 6 SERIES: PRMC3-S │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • 3 W isolated output smaller package single/dual regulated outputs 3,000 Vdc isolation continuous short circuit protection temperature range (-40~105°C) efficiency up to 84% EN/BS EN 62368-1 certified MODEL input voltage output voltage output current output power ripple and noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PRMC3-D5-S5-S2 5 4.5~9 5 25 500 2.5 100 73 PRMC3-D5-S9-S 5 4.5~9 9 14 278 2.5 100 74 PRMC3-D5-S12-S2 5 4.5~9 12 10 208 2.5 100 77 PRMC3-D5-S15-S 5 4.5~9 15 8 167 2.5 100 74 PRMC3-D5-D5-S2 5 4.5~9 ±5 ±13 ±250 2.5 100 74 2 PRMC3-D5-D12-S 5 4.5~9 ±12 ±5 ±104 2.5 100 77 PRMC3-D5-D15-S2 5 4.5~9 ±15 ±4 ±83 2.5 100 77 2 PRMC3-D12-S3-S 12 9~18 3.3 38 758 2.5 100 74 PRMC3-D12-S5-S2 12 9~18 5 30 600 3 100 76 2 PRMC3-D12-S12-S 12 9~18 12 13 250 3 100 82 PRMC3-D12-S15-S2 12 9~18 15 10 200 3 100 83 PRMC3-D12-D5-S 12 9~18 ±5 ±15 ±300 3 100 78 PRMC3-D12-D12-S2 12 9~18 ±12 ±6 ±125 3 100 79 PRMC3-D12-D15-S 12 9~18 ±15 ±5 ±100 3 100 80 PRMC3-D24-S3-S2 24 18~36 3.3 38 758 2.5 100 74 PRMC3-D24-S5-S 24 18~36 5 30 600 3 100 81 PRMC3-D24-S9-S 24 18~36 9 17 333 3 100 83 PRMC3-D24-S12-S2 24 18~36 12 13 250 3 100 83 2 PRMC3-D24-S15-S 24 18~36 15 10 200 3 100 83 PRMC3-D24-S24-S2 24 18~36 24 6 125 3 100 83 PRMC3-D24-D5-S 24 18~36 ±5 ±15 ±300 3 100 79 PRMC3-D24-D12-S2 24 18~36 ±12 ±6 ±125 3 100 83 PRMC3-D24-D15-S 24 18~36 ±15 ±5 ±100 3 100 83 PRMC3-D48-S5-S 48 36~75 5 30 600 3 100 76 PRMC3-D48-S12-S 48 36~75 12 13 250 3 100 80 PRMC3-D48-S15-S 48 36~75 15 10 200 3 100 84 2 2 2 2 2 2 2 2 cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRMC3-S │ DESCRIPTION: DC-DC CONVERTER MODEL (CONTINUED) input voltage typ (Vdc) range (Vdc) PRMC3-D48-D5-S 48 PRMC3-D48-D12-S 48 PRMC3-D48-D15-S 48 Notes: date 12/06/2022 │ page 2 of 6 output voltage output current output power ripple and noise1 efficiency (Vdc) min (mA) max (mA) max (W) typ (mVp-p) typ (%) 36~75 ±5 ±15 ±300 3 100 79 36~75 ±12 ±6 ±125 3 100 82 36~75 ±15 ±5 ±100 3 100 82 1. Ripple and noise are measured at 20 MHz BW by “parallel cable” method with 1 μF ceramic and 10 μF electrolytic capacitors on the output. 2. Model is not CE certified. PART NUMBER KEY PRMC3 - DXX - XXX -S Base Number Output S = single D = dual Input Voltage INPUT Packaging Style SIP Output Voltage parameter conditions/description min typ max units operating input voltage 5 Vdc input models 12 Vdc input models 24 Vdc input models 48 Vdc input models 4.5 9 18 36 5 12 24 48 9 18 36 75 Vdc Vdc Vdc Vdc start-up voltage 5 Vdc input models 12 Vdc input models 24 Vdc input models 48 Vdc input models 3.5 4.5 11 24 4 8 16 33 4.5 9 18 36 Vdc Vdc Vdc Vdc surge voltage for maximum of 1 second 5 Vdc input models 12 Vdc input models 24 Vdc input models 48 Vdc input models -0.7 -0.7 -0.7 -0.7 12 25 50 100 Vdc Vdc Vdc Vdc filter capacitance filter typ max units models ON (CTRL open or insulated) CTRL3 Notes: models OFF (connect voltage, current into CTRL is 5~10mA) 3. See application notes on page 6. OUTPUT parameter conditions/description line regulation full load, input voltage from low to high ±0.2 ±0.5 % load regulation 5% to 100% load ±0.2 ±0.5 % voltage accuracy 5% to 100% load ±1 ±3 % no-load voltage accuracy4 input voltage range ±1.5 ±5 % voltage balance dual output, balanced loads ±0.5 ±1 switching frequency 100% load, nominal input voltage, PFM mode 250 transient recovery time 25% load step change 0.5 3 ms transient response deviation 25% load step change ±2.5 ±5 % temperature coeffecient 100% load ±0.02 ±0.03 %/°C max units 5 Notes: min % KHz 4. The max no-load voltage accuracy for PRMC3-D12-S3-S is ±8% 5. For dual output models, unbalanced loads should not exceed ±5%. If ±5% is exceeded, it may not meet all specifications. PROTECTIONS parameter conditions/description min short circuit protection continuous, automatic recovery cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRMC3-S │ DESCRIPTION: DC-DC CONVERTER date 12/06/2022 │ page 3 of 6 SAFETY AND COMPLIANCE parameter conditions/description isolation voltage input to output for 1 minute at 1 mA max. 3,000 min typ max units Vdc isolation resistance input to output at 500 Vdc 1,000 MΩ safety approvals certified to 62368-1: EN, BS EN conducted emissions CISPR22/EN55022, class B (external circuit required, see Figure 1-b) radiated emissions CISPR22/EN55022, class B (external circuit required, see Figure 1-b) ESD IEC/EN61000-4-2, class B, contact ± 4kV radiated immunity IEC/EN61000-4-3, class A, 10V/m EFT/burst IEC/EN61000-4-4, class B, ± 2kV (external circuit required, see Figure 1-a) surge IEC/EN61000-4-5, class B, ± 2kV (external circuit required, see Figure 1-a) conducted immunity IEC/EN61000-4-6, class A, 3 Vr.m.s voltage dips & interruptions IEC/EN61000-4-29, class B, 0%-70% MTBF as per MIL-HDBK-217F @ 25°C RoHS 2011/65/EU 1,000,000 hours ENVIRONMENTAL parameter conditions/description min max units operating temperature see derating curve -40 105 °C -55 125 °C 95 % storage temperature storage humidity non-condensing temperature rise at full load, Ta=25°C typ 25 °C SOLDERABILITY parameter conditions/description hand soldering wave soldering min typ max units 1.5 mm from case for 10 seconds 300 °C see wave soldering profile 260 °C max units MECHANICAL parameter conditions/description dimensions 22.00 x 9.50 x 12.00 (0.866 x 0.374 x 0.472 inch) min case material plastic (UL94-V0) typ mm weight 4.9 g Dual Output 1 GND GND 2 Vin Vin 3 CTRL CTRL 5 NC NC 6 +Vo +Vo 7 0V 0V 8 CS -Vo NC: No Connection 12.00 [0.472] Ø1.00 [0.039] 1 2 3 5 6 4.10 [0.161] Front View 2.54[0.100] 22.00 [0.866] 1 2 3 5 6 0.50[0.020] 17.78 [0.700] Bottom View cui.com 0.30 [0.012] Single Output 9.50 [0.374] PIN CONNECTIONS PIN 2.50 [0.098] units: mm[inch] tolerance: ±0.25[±0.010] pin section tolerance: ±0.10[±0.004] 0.50[0.020] MECHANICAL DRAWING 7 8 PCB Layout Top View 7 8 Grid Size: 2.54mm x 2.54mm Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRMC3-S │ DESCRIPTION: DC-DC CONVERTER date 12/06/2022 │ page 4 of 6 DERATING CURVES EMC RECOMMENDED CIRCUIT Figure 1 Recommended external circuit components Vin (Vdc) 5 FUSE Table 1 12 24 48 choose according to practical input current MOV -- -- 10D560 10D101 LDM1 -- -- 56μH 56μH TVS SMCJ13A SMCJ28A SMCJ48A SMCJ90A C0 680μF/16V 680μF/25V 120μF/50V 120μF/100V C1 4.7μF/50V 4.7μF/50V 4.7μF/50V 4.7μF/100V LDM2 12μH 12μH 12μH 12μH C2 4.7μF/50V 4.7μF/50V 4.7μF/50V 4.7μF/100V CY 1nF/3kV 1nF/3kV 1nF/3kV 1nF/3kV D1 RB160M-60/1A RB160M-60/1A RB160M-60/1A RB160M-60/1A VC − VD − 1.0 −300 aaaaaaaaaaaa IC R= Follows:aaaaa aaaaa R Cd 47nF/100V 47nF/100V 47nF/100V 47nF/100V Note: Figure 1-c is on/off control circuit. See page 6 for details. TEST CONFIGURATION External components Figure 2 Table 2 Note: Input reflected-ripple current is measured with an inductor Lin and Capacitor Cin to simulate source impedance. cui.com Lin 4.7μH Cin 220μF, ESR < 1.0Ω at 100 KHz Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PRMC3-S │ DESCRIPTION: DC-DC CONVERTER date 12/06/2022 │ page 5 of 6 APPLICATION NOTES 1. Output load requirement To ensure this module can operate efficiently and reliably, the minimum output load may not be less than 5% of the full load during operation. If the actual output power is low, connect a resistor at the output end in parallel to increase the load. 2. Recommended circuit This series has been tested according to the following recommended testing circuit before leaving the factory. This series should be tested under load (see Figure 3 and Table 3). If you want to further decrease the input/output ripple, you can increase the capacitance accordingly or choose capacitors with low ESR. However, the capacitance of the output filter capacitor must be appropriate. If the capacitance is too high, a startup problem might arise. For every channel of the output, to ensure safe and reliable operation, the maximum capacitance must be less than the maximum capacitive load (see Table 4). Single output Dual output Figure 3 Table 3 Table 4 Vin (Vdc) Cin1 (µF) Cin2 (µF) Lin (µH) Cs1 (µF) Cout (µF) Lout2 (µH) Cd (nF/V) 5 100 47 4.7~12 10~22 100 2.2~10 47/100 12 100 47 4.7~12 10~22 100 2.2~10 47/100 24 10 1 4.7~12 10~22 100 2.2~10 47/100 48 10 1 4.7~12 10~22 100 2.2~10 47/100 Note: 1. For single output only 2. For dual output only Single Vout (Vdc) Max. Capacitive Load (μF) Dual Vout (Vdc) Max. Capacitive Load1 (μF) 3.3 2700 -- -- 5 2200 5 1000 9 1000 -- -- 12 680 12 470                                                                                                           15 470 15 330 24 Note: 330 -- -- 1. For each output. 3. CTRL Terminal When open or applied high impedance, the converter will turn on. When it’s pulled high, the converter will shutdown. The input current should between 5~10mA. Exceeding the maximum 20mA will cause permanent damage to the converter. The value for R can be derived as follows: V − VD − 1.0 −300 R= C IC Vc: Control pin input voltage VD: Forward voltage drop of diode D1 IC: Input current to control pin R: Resistor of control circuit Figure 4 4. Input Current When it is used in an unregulated condition, make sure that the input fluctuations and ripple voltage do not exceed the module standard. Refer to Figure 5 and Table 5 for the startup current of this dc-dc module. Figure 5 Note: Table 5 Vin (Vdc) Ip (mA) 5 1110 12 640 24 325 48 160 1. Minimum load shouldn't be less than 5%, otherwise ripple may increase dramatically. Operation under minimum load will not damage the converter, however, they may not meet all specifications listed. 2. Maximum capacitive load is tested at input voltage range and full load. 3. All specifications are measured at Ta=25°C, humidity