PSE-600-48

Additional Resources: Product Page date 05/06/2015 page 1 of 4 SERIES: PSE-600 │ DESCRIPTION: AC-DC HOT-SWAP POWER SUPPLY h A ca meri US MODEL PSE-600-48 Notes: output voltage output current (Vdc) max (A) 48 1. At 230 Vac input. 12.5 N PART NUMBER KEY N rt output power ripple and noise efficiency1 max (W) max (mVp-p) typ (%) 600 480 90 TI o of N C . T Rheinla nd UV U up to 600 W continuous power 1U x 2U form factor I2C communication for monitoring and control redundant (N+1) operation blind mate connections for hot-swap power factor correction 3.3 Vdc (0.5 A) standby voltage DROOP current sharing or forced current sharing (optional) single I/O connector for AC input, DC output and signals remote on/off control, power good signal efficiency up to 90% , I nc • • • • • • • • • • • ED FEATURES PSE-600 - 48 - CXX O Base Number D IS C Output Voltage cui.com Reserved for Custom Configurations Additional Resources: Product Page CUI Inc │ SERIES: PSE-600 │ DESCRIPTION: AC-DC HOT-SWAP POWER SUPPLY date 05/06/2015 │ page 2 of 4 INPUT parameter conditions/description min voltage 50 current at 90 Vac, full load inrush current half cycle, cold start, 25°C at 115 Vac, 60 Hz at 230 Vac, 50 Hz leakage current power factor correction 0.95 parameter conditions/description min total regulation 60 Hz 8.25 A 20 40 A A 1.5 mArms 0.98 typ max hold-up time at full load in redundant operation 12 20 OUTPUT - V2 (STANDBY OUTPUT) conditions/description min TI parameter 3 N 25% step load, 1A/µs slew rate, recovery to 1% within 1 ms output voltage output current typ total regulation N STATUS & CONTROL conditions/description SCL 100 kHz clock rate, SDA data line remote sense main output % % max units Vdc 0.5 A 33 mVp-p ±2.5 % min typ max units min typ max units 60 Vdc % 120 % max units O parameter I2C interface units ms ms 3.3 0 ripple and noise “active low” enables main output, last-mate/ first-break enable pin droop share; active current share option AC OK, DC OK and OTP_OK (open collector, active “low” = OK); and PS_PRESENT IS C status Vac ±3 transient response current share units 264 U OUTPUT - V1 (MAIN OUTPUT) max ED frequency remote enable typ 90 LED indicator AC OK & DC OK indicators PROTECTIONS parameter conditions/description over voltage protection V1 V2 over current protection latching, shutdown after 2 s over temperature protection output shut down, auto recovery 115 D SAFETY & COMPLIANCE parameter conditions/description min safety approvals cTUVus UL60950-1, CE (LVD) emissions FCC 15 Sub Part J, Class A, EN55022 Class A harmonic compliance EN61000-3-2 Class A surges (mains) IEC/EN 61000-4-5 voltage dips/interruptions IEC/EN 61000-4-11 cui.com typ Additional Resources: Product Page CUI Inc │ SERIES: PSE-600 │ DESCRIPTION: AC-DC HOT-SWAP POWER SUPPLY date 05/06/2015 │ page 3 of 4 SAFETY & COMPLIANCE (CONTINUED) conditions/description as per Telcordia SR332, 40°C, full load min RoHS 2011/65/EU ENVIRONMENTAL parameter typ max 500,000 conditions/description min operating temperature 0 storage temperature -40 MECHANICAL min dimensions 10.00 x 3.30 x 1.60 (254 x 83.8 x 40.6 mm) cooling / airflow integral high performance 38 mm fan, inlet at face; exhaust at connector input / output connector FCI P/N 51939-420LF mates with FCI P/N 51915-192LF hot-swap capability fully hot-swappable, blind mate connector typ max units 55 °C 85 °C max units U conditions/description typ inches N parameter units hours ED parameter MTBF TI MECHANICAL DRAWING IS C O N units: inches [mm] tolerance: X.XX ±0.02 [0.50] X.XXX ±0.010 [0.25] Pins +48 V D P1 Function Pins Function Pins INPUT/OUTPUT CONNECTOR Function Pins Function Pins Function Pins Function Pins Function A1 +V1 Sense A2 EEPROM A0 A31 N/C A4 AC OK A5 Signal Return A6 +3.3 VSB Return P2 -48 V B1 -V1 Sense B2 EEPROM A1 B31 N/C B4 DC OK B5 EEPROM Clock SCL B6 Reserved P3 FG C1 ISHARE C2 EEPROM A2 C31 N/C C4 PS_PRESENT C5 EEPROM Data (SDA) C6 Reserved P4 AC Neutral D1 Reserved D2 N/C D31 N/C D4 OTP OK D5 +3.3 VSB D6 Enable (short pin) P5 AC Line -- -- -- -- -- -- -- -- -- -- -- -- Note: 1. POE Isolation Barrier - No traces to be routed between these pins and any others. cui.com Additional Resources: Product Page CUI Inc │ SERIES: PSE-600 │ DESCRIPTION: AC-DC HOT-SWAP POWER SUPPLY date 05/06/2015 │ page 4 of 4 REVISION HISTORY 1.0 description date initial release 05/06/2015 ED rev. D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.