PSK-10W-12-DIN

Additional Resources: Product Page date 05/26/2022 page 1 of 7 SERIES: PSK-10W Ϳ DESCRIPTION: INTERNAL AC-DC POWER SUPPLY FEATURES ED wide input range (85~305 Vac) UL/EN/IEC 62368 certified meets CISPR32/EN 55032 Class B without external components short-circuit, over-current, over-voltage protections PSK-10W-3 output voltage output current output power ripple and noise HϒFLHQF\ (Vdc) max (A) max (W) W\S (mVp-p) W\S (%) 100 72 3.3 PSK-10W-5 5 PSK-10W-9 9 12 PSK-10W-15 15 PSK-10W-24 2.0 24 2.0 10 100 76 1.1 10 100 79 0.9 10.8 100 81 0.7 10.5 100 81 0.45 10.8 100 82 O PART NUMBER KEY 6.6 N PSK-10W-12 TI MODEL N U • • • • C PSK - 10W - XX - X Output Voltage Mounting Style blank = board mount T = chassis mount DIN = DIN-rail mount D IS Base Number cui.com Additional Resources: Product Page CUI Inc Ϳ SERIES: PSK-10W Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 Ϳ page 2 of 7 INPUT parameter conditions/description min max units voltage ac input dc input 85 100 305 430 Vac Vdc 47 63 Hz ED frequency at 115 Vac at 230 Vac current inrush current at 115 Vac at 230 Vac leakage current 230 Vac / 50 Hz no load power consumption at 230 Vac .23 .15 15 30 capacitive load 3.3 Vdc output models 5 Vdc output models 9 Vdc output models 12 Vdc output models 15 Vdc output models 24 Vdc output models output voltage accuracy 3.3 V all other models line regulation full load load regulation 0~100% load hold-up time at 115 Vac at 230 Vac N WHPSHUDWXUHFRHϒFLHQW PROTECTIONS conditions/description over voltage protection self recovery 110 hiccup, continuous, self recovery D IS short circuit protection min 3.3 / 5 Vdc output models 9 Vdc output models 12 Vdc output models 15 Vdc output models 24 Vdc output models C over current protection O parameter min N conditions/description TI parameter U OUTPUT switching frequency W\S cui.com W\S A A A .25 mA 0.5 W max units 26400 9440 3600 2000 1170 370 Nj) ±3 ±2 % % ±0.5 % ±1.0 % 8 75 ms ms 100 kHz ±0.02 %/°C W\S max units 9 15 20 25 35 V 300 % Additional Resources: Product Page CUI Inc Ϳ SERIES: PSK-10W Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 Ϳ page 3 of 7 SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output min W\S max safety approvals IEC 62368/EN 62368/UL 62368 safety class Class II EMI/EMC CISPR 32/EN 55032: 2015 Class B ESD IEC/EN 61000-4-2: Contact ±6KV/ Air ±8KV, perf. Criteria B radiated immunity IEC/EN 61000-4-3: 10V/m, perf. Criteria A ()7EXUVW IEC/EN 61000-4-4: ±2KV, perf. Criteria B IEC/EN 61000-4-4: ±4KV, see recommended circuit, perf. Criteria B surge IEC/EN 61000-4-5: line to line ±1KV, perf. Criteria B IEC/EN 61000-4-5: line to line ±2KV, line to ground ±4KV, see recommended circuit conducted immunity IEC/EN 61000-4-6: 10Vr.m.s, perf. Criteria A voltage dips IEC/EN 61000-4-11: 0%, 70% 07%) DVSHU0,/+'%.)#ƒ& RoHS yes U N 300,000 C O N TI DERATING CURVE D IS EFFICIENCY CURVES cui.com units Vac ED 4,000 hours Additional Resources: Product Page CUI Inc Ϳ SERIES: PSK-10W Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 Ϳ page 4 of 7 ENVIRONMENTAL parameter conditions/description min max units operating temperature see derating curves -40 70 °C -40 85 °C 0 95 % storage temperature non-condensing ED storage humidity W\S SOLDERABILITY parameter conditions/description min W\S max units wave soldering for 5~10 seconds 255 260 265 °C hand soldering for 3~5 seconds 350 360 370 °C parameter conditions/description min W\S max units dimensions 53.80 x 28.80 x 19.00 U MECHANICAL weight 48 free air convection case material %ODFNSODVWLFÀDPHUHWDUGDQWDQGKHDWUHVLVWDQW8/9 units: mm [inch] tolerance: ±0.50 [±0.020] pin diameter tolerances: ±0.10 [±0.004] )XQFWLRQ 1 AC (N) 2 AC (L) 3 -Vo 4 +Vo D IS C O PIN N PIN CONNECTIONS TI MECHANICAL DRAWING (BOARD MOUNT) N cooling cui.com mm g Additional Resources: Product Page CUI Inc Ϳ SERIES: PSK-10W Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 Ϳ page 5 of 7 MECHANICAL DRAWING (CHASSIS MOUNT) ED units: mm [inch] tolerance: ±0.50 [±0.020] wire range: 24~12 AWG WLJKWHQLQJWRUTXHPD[1ƊP )XQFWLRQ 1 AC (N) 2 AC (L) 3 -Vo 4 +Vo TI N PIN U PIN CONNECTIONS PIN CONNECTIONS )XQFWLRQ 1 AC (N) 2 3 AC (L) -Vo +Vo D IS 4 C PIN O units: mm [inch] tolerance: ±0.50 [±0.020] wire range: 24~12 AWG WLJKWHQLQJWRUTXHPD[1ƊP N MECHANICAL DRAWING (DIN-RAIL MOUNT) cui.com Additional Resources: Product Page CUI Inc Ϳ SERIES: PSK-10W Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 Ϳ page 6 of 7 TYPICAL APPLICATION CIRCUIT U Table 1 ED Figure 1 Recommended External Circuit Components )86(6 MOV6 C1 3.3 2A/300V S14K350 Nj)9 5 2A/300V S14K350 C2 TVS SMBJ7.0A Nj)9 SMBJ7.0A Nj)9 9 2A/300V S14K350 Nj)9 SMBJ15A 12 2A/300V S14K350 N Nj)9 Nj)9 Nj)9 Nj)9 SMBJ20A 15 2A/300V S14K350 Nj)9 Nj)9 SMBJ20A 24 2A/300V S14K350 Nj)9 Nj)9 SMBJ30A TI Notes: Vo (Vdc) 6. Chassis Mount and DIN-Rail Mount versions include the fuse and MOV components. N EMC RECOMMENDED CIRCUIT D IS C O Figure 2 Table 2 Recommended External Circuit Components )86( 3.15 A/300 V, slow fusing MOV S14K350 LCM 2.2 mH CX —)9DF L1 4.7 µH/ 2 A CY1/CY2 Note: 1RWHV  S)9DF Also refer to Table 1. &LVDFHUDPLFFDSDFLWRUXVHGWR¿OWHUKLJKIUHTXHQF\QRLVH &LVDQHOHFWURO\WLFFDSDFLWRUDQGLWLVUHFRPPHQGHGWREHKLJKIUHTXHQF\DQGORZLPSHGDQFH)RUFDSDFLWDQFHDQGFXUUHQWRIFDSDFLWRUUHIHUWRWKHGDWDVKHHWSURYLGHGE\WKH manufacturer. Voltage derating of capacitor should be at least 80%. 9. TVS is a recommended component to protect post-circuits (if converter fails). cui.com Additional Resources: Product Page CUI Inc Ϳ SERIES: PSK-10W Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 Ϳ page 7 of 7 REVISION HISTORY rev. description date initial release 06/29/2020 mechanical drawings updated 12/03/2020 1.02 ¿JXUHDQGFLUFXLWGUDZLQJVXSGDWHG 1.03 UKCA mark added ED 1.0 1.01 02/24/2021 05/26/2022 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 )D[ cui.com WHFKVXSSRUW#FXLFRP &8,RϑHUVDWZR\HDUOLPLWHGZDUUDQW\&RPSOHWHZDUUDQW\LQIRUPDWLRQLVOLVWHGRQRXUZHEVLWH CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a OLIHVXSSRUWGHYLFHRUV\VWHPZKRVHIDLOXUHWRSHUIRUPFDQEHUHDVRQDEO\H[SHFWHGWRFDXVHWKHIDLOXUHRIWKHOLIHVXSSRUWGHYLFHRUV\VWHPRUWRDϑHFWLWVVDIHW\RUHϑHFWLYHQHVV