PSK-5W-5-T

Additional Resources: Product Page | 3D Model | PCB Footprint date 09/13/2022 page 1 of 7 SERIES: PSK-5W │ DESCRIPTION: INTERNAL AC-DC POWER SUPPLY FEATURES • • • • wide input range (85~305 Vac) UL/EN/IEC 62368 certified meets CISPR32/EN 55032 Class B without external components short-circuit, over-current, over-voltage protections MODEL PSK-5W-31,2,3 output voltage output current output power ripple and noise efficiency (Vdc) max (A) max (W) typ (mVp-p) typ (%) 3.3 1.25 4.2 100 70 PSK-5W-5 5 1.0 5 100 76 PSK-5W-91,2,3 9 0.55 5 100 74 1,2 1,2,3 PSK-5W-12 12 0.42 5 100 77 PSK-5W-151,2,3 15 0.333 5 100 77 PSK-5W-24 24 0.23 5.5 100 80 1,2,3 Note: 1. Discontinued model - board mount option. 2. Discontinued model - chassis mount option. 3. Discontinued model - DIN-rail mount option. PART NUMBER KEY PSK - 5W - XX - X Base Number Output Voltage cui.com Mounting Style: blank = board mount T = chassis mount DIN = DIN-rail mount Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PSK-5W │ DESCRIPTION: AC-DC POWER SUPPLY date 09/13/2022 │ page 2 of 7 INPUT parameter conditions/description min max units voltage ac input dc input 85 100 305 430 Vac Vdc 47 63 Hz 0.15 0.10 A A frequency current1 115 Vac 230 Vac inrush current 115 Vac 230 Vac typ 10 20 leakage current A A 5 mA max units 4,000 4,000 1,000 820 820 470 μF Note 1: Recommended input fuse - 1A/300V, slow blow OUTPUT parameter conditions/description capacitive load 3.3 Vdc 5 Vdc 9 Vdc 12 Vdc 15 Vdc 24 Vdc output voltage accuracy 3.3 V all other models line regulation min typ ±3 ±2 % % rated load ±0.5 % load regulation 0~100% load ±1.0 % hold-up time 115 Vac input 230 Vac input 8 60 ms ms 100 kHz switching frequency PROTECTIONS parameter conditions/description min over voltage protection 3.3/5 Vdc output 9 Vdc output 12/15 Vdc output 24 Vdc output over current protection self recovery short circuit protection output shutdown, auto recovery typ max units 7.5 15 20 30 V V V V 110 % SAFETY & COMPLIANCE parameter conditions/description min typ isolation voltage for 1 minute, 5mA safety approvals UL/EN/IEC 62368 safety class Class II EMI/EMC CISPR32/EN55032: Class B (no external components required) ESD IEC/EN 61000-4-2: Contact ±6KV/ Air ±8KV, perf. Criteria B radiated immunity IEC/EN 61000-4-3: 10V/m, perf. Criteria A EFT/burst IEC/EN 61000-4-4: ±2KV, perf. Criteria B IEC/EN 61000-4-4: ±4KV, perf. Criteria B, see recommended EMC circuit surge IEC/EN 61000-4-5: line to line ±1KV, perf. Criteria B IEC/EN 61000-4-5: line to line ±2kV, line to ground ±4kV, perf. Criteria B, see recommended EMC circuit conducted immunity IEC/EN 61000-4-6: 10Vr.m.s, perf. Criteria A voltage dips IEC/EN 61000-4-11: 0%, 70% MTBF MIL-HDBK-217F@25°C RoHS yes 4,000 300,000 cui.com max units Vac hours Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PSK-5W │ DESCRIPTION: AC-DC POWER SUPPLY date 09/13/2022 │ page 3 of 7 ENVIRONMENTAL parameter max units operating temperature conditions/description min -40 70 °C storage temperature -40 85 °C 0 95 % max units 260 °C 360 °C max units storage humidity typ SOLDERABILITY parameter conditions/description min typ wave soldering hand soldering 3~5 seconds max MECHANICAL parameter conditions/description dimensions DIP: 50.80 x 25.40 x 15.36 chassis mount: 76.00 x 31.50 x 24.16 DIN rail: 76.00 x 31.50 x 28.76 min weight DIP chassis mount DIN rail case material Black plastic, flame-retardant and heat-resistant (UL94V-0) units: mm [inch] tolerance: ±0.50 [±0.020] PIN CONNECTIONS Function 1 AC(N) 2 AC(L) 3 -Vo 4 +Vo mm mm mm 31 52 70 MECHANICAL DRAWING (BOARD MOUNT) PIN typ cui.com g g g Additional Resources: Product Page | CUI Inc │ SERIES: PSK-5W │ DESCRIPTION: AC-DC POWER SUPPLY units: mm [inch] tolerance: ±0.50 [±0.020] wire range: 24~12 AWG tightening torque:Max 0.4 N·m PIN CONNECTIONS Function 1 AC(N) 2 AC(L) 3 -Vo 4 +Vo MECHANICAL DRAWING (DIN-RAIL MOUNT) units: mm [inch] tolerance: ±0.50 [±0.020] wire range: 24~12 AWG tightening torque:Max 0.4 N·m mounting rail: TS35, rail needs to connect safety ground PIN CONNECTIONS PIN Function 1 AC(N) 2 AC(L) 3 -Vo 4 +Vo | PCB Footprint date 09/13/2022 │ page 4 of 7 MECHANICAL DRAWING (CHASSIS MOUNT) PIN 3D Model cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PSK-5W │ DESCRIPTION: AC-DC POWER SUPPLY date 09/13/2022 │ page 5 of 7 TYPICAL APPLICATION CIRCUIT Output Filter Components: We recommend using an electrolytic capacitor with high frequency, and low ESR rating for C2 (refer to manufacture’s datasheet). Choose a Capacitor voltage rating with at least 20% margin, in other words not exceeding 80%. C1 is a ceramic capacitor used for filtering highfrequency noise and TVS is a recommended suppressor diode to protect the application in case of a converter failure. Figure 1 Table 1 Part No. C1(µF) C2(µF) PSK-5W-3 220 PSK-5W-5 220 PSK-5W-9 PSK-5W-12 FUSE TVS SMBJ7A SMBJ7A 1A/300V, slow-blow, required 100 1 MOV 100 S14K350 SMBJ12A SMBJ20A PSK-5W-15 100 SMBJ20A PSK-5W-24 47 SMBJ30A EMC RECOMMENDED CIRCUIT Figure 2 Table 2 Components Recommended Value MOV S14K350 CX 0.1µF/310VAC L1 4.7uH/2.0A CY1 1nF/400VAC CY2 1nF/400VAC LCM 2.2mH FUSE 2A/300V, slow-blow, required R0 33Ω/3W cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PSK-5W │ DESCRIPTION: AC-DC POWER SUPPLY 3D Model | PCB Footprint date 09/13/2022 │ page 6 of 7 DERATING CURVE EFFICIENCY CURVES cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PSK-5W │ DESCRIPTION: AC-DC POWER SUPPLY date 09/13/2022 │ page 7 of 7 REVISION HISTORY rev. description date 1.0 initial release 06/29/2020 1.01 mechanical drawings updated 12/03/2020 1.02 figure and circuit drawings updated 02/24/2021 1.03 discontinued models PSK-5W-3, PSK-5W-9, PSK-5W-12, PSK-5W-15, PSK-5W-3-T, PSK-5W-12-T, PSK-5W-15-T, PSK-5W-3-DIN, PSK-5W-5-DIN, PSK-5W-12-DIN, PSK-5W-15-DIN, PSK-5W-24-DIN 07/01/2022 1.04 discontinued models PSK-5W-3-DIN, PSK-5W-5, PSK-5W-5-T, PSK-5W-9-T, PSK-5W-9-DIN, PSK-5W-24, PSK-5W-24-T 09/13/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.