SCD15PUR

Characteristics of SCD10PUR ØA 4 Output Voltage vs Temperature OUTPUT VOLTAGE Vo (V) Output Voltage vs Input Current 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 4-Ø0.8 2.5 -15 -10 -5 0 5 10 SPECIFICATIONS Model Rated Current Linearity Range Output Voltage Zero Current Offset Voltage Output Voltage Linearity Supply Voltage Max Current Consumption Response Output V Temp Char Zero Current Offset V Temp Char Hysteresis Primary Overcurrent Withstand Voltage Insulation Resistance Operating Temp Storage Temp COPYRIGHT 2009 BY CUI INC. 4.45 4.40 4.35 -15 0 20 40 60 80 100 Offset Voltage vs Temperature ØB Mounting Hole Dimensions Model ØA ØB SCD03PUR 0.6 1.1 SCD05PUR 0.9 1.4 SCD10PUR 1.1 1.6 SCD15PUR 1.4 1.9 SCD20PUR 1.7 2.2 2.60 Max Avg Min 2.55 2.50 2.45 2.40 2.35 -15 10 20 30 40 50 60 70 80 90 0 AMBIENT TEMPERATURE Ta (˚C) Ordering Information SCD (Vcc = 5V, RL = 10kΩ, Ta = 25°C) SCD03PUR SCD05PUR SCD10PUR SCD15PUR SCD20PUR ±3A ±5A ±10A ±15A ±20A ±4A ±6A ±11A ±16A ±21A 4.5V± 30mV @ +If; 0.5V± 30mV @ -If 2.5V± 20mV max. (after demagnetization) ≤0.5% @ rated current 5V ± 5% 25mA max. 3µS typ. @ 50 Amp/Turns/µS ± 0.1%/°C max. @ rated current ± 1.5mV/°C max. 8mV max. @ rated current to 0A 10X rated current, 50 mS, no damage 2000 VAC, 50/60Hz, 1 minute between primary coil & terminal* 500 VDC, 500MΩ between primary coil & terminal -10° to +75° C -30 to +90°C REV. A 4.50 15 0.5 Pin Assignments Pin# 1 +5V 2 NC 3 Output 4 0V 5 Input (+) 6 Input (-) 4.55 INPUT CURRENT (A) 6 10 Max Min Avg 4.60 AMBIENT TEMPERATURE Ta (˚C) 1 2 3 4 5 4.65 OFFSET VOLTAGE Vr (V) 0 7.62 4.70 0.5 10 Mounting Footprint (Shown from mounting side) OUTPUT VOLTAGE Vo (V) 5 20 15 0.25 15 5.0 DESCRIPTION NEW DRAWING PUR Input Voltage: A: ±15VDC B: ±12VDC S: +12VDC T: ±5VDC U: +5VDC Current Rating: 03: 3A 05: 5A 10: 10A 15: 15A 20: 20A RoHS 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TITLE: REV: current sensor PA RT NO. DATE 05/15/2009 Input Current Polarity: N: +(DC only) R: ± (bipolar) SCDXXPUR DRAWN BY: MM APPROVED BY: JRH A UNITS: SCALE: