SDI120G-24-U-P51

Additional Resources: Product Page | 3D Model date 09/22/2023 page 1 of 6 SERIES: SDI120G-U │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • up to 120 W continuous power gallium nitride (GaN) technology universal input over voltage, over current and short cicuit protections IEC 62368-1 compliant compact design custom design available MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) SDI120G-12-U 12 9.0 108.0 150 VI SDI120G-19-U 19 6.3 119.7 190 VI SDI120G-20-U 20 6.0 120.0 200 VI SDI120G-24-U 24 5.0 120.0 240 VI SDI120G-48-U 48 2.5 120.0 480 VI SDI120G-56-U 56 2.14 119.8 560 VI Notes: efficiency level 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF multilayer ceramic and 10 μF low ESR electrolytic capacitors. PART NUMBER KEY SDI120G - XX - UX - P51 - CXX Base Number AC Inlet Type: IEC320/C14 Reserved for Custom Configurations Output Voltage Input Cable: “Blank” = No Cable C = North America input cable 2 = Europe input cable 3 = United Kingdom input cable 4 = Australia input cable 5 = China input cable 6 = South Korea input cable 7 = Brazil input cable 8 = South Africa input cable 9 = Japan input cable cui.com DC Plug Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI120G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 09/22/2023 │ page 2 of 6 INPUT parameter min typ max units voltage conditions/description 90 100~240 264 Vac frequency 47 50~60 63 Hz 1.6 A current inrush current at 230 Vac, full load, 25°C, cold start leakage current power factor correction at 115 & 230 Vac, full load no load power consumption at 115 & 230 Vac, no load 80 A 3.5 mA 0.15 W max units 0.9 OUTPUT parameter conditions/description min regulation typ ±5 % PROTECTIONS parameter conditions/description min over voltage protection over current protection short circuit protection output shut down, auto recovery over temperature protection latch typ max units output shut down with latch 150 % output shut down, auto recovery 150 % max units SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output at 10 mA for 1 minute input to frame ground at 10 mA for 1 minute min isolation resistance input to output at 500 Vdc input to frame ground at 500 Vdc safety approvals 62368: UL/cUL, UKCA, PSE EMI/EMC FCC Part 15 subpart B, class B ANSI C63.4-2014 ICES-003 issue 6 EN55032: 2015 EN 55035: 2017 EN 61000-3-2 AS/NZS CISPR 32: 2015 MTBF as per Telcordia SR-332, 25°C RoHS yes typ 3,000 1,770 Vac Vac 10 10 MΩ MΩ 300,000 hrs ENVIRONMENTAL parameter conditions/description min operating temperature see derating curve storage temperature typ max units -20 40 °C -20 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page CUI Inc │ SERIES: SDI120G-U │ DESCRIPTION: AC-DC POWER SUPPLY | 3D Model date 09/22/2023 │ page 3 of 6 DERATING CURVES cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI120G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 09/22/2023 │ page 4 of 6 MECHANICAL parameter conditions/description dimensions 132 x 51 x 32 inlet plug IEC320/C14 min typ units mm weight 336 MECHANICAL DRAWING units: mm tolerance: ±1.0 mm Top-view Front-view max Label Side-view Bottom-view DC CORD units: mm Table 1 MODEL NO. CABLE CORD LENGTH SDI120G-12 UL11352, 14 AWG 1,200 mm ±30 SDI120G-19 UL11352, 16 AWG 1,500 mm ±30 SDI120G-20 UL11352, 16 AWG 1,500 mm ±30 SDI120G-24 UL11352, 16 AWG 1,500 mm ±30 SDI120G-48 UL2464, 18 AWG 1,500 mm ±30 SDI120G-56 UL2464, 18 AWG 1,500 mm ±30 cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI120G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 09/22/2023 │ page 5 of 6 AC CORD units: mm cord length NORTH AMERICA EUROPE UNITED KINGDOM AUSTRALIA CHINA SOUTH KOREA BRAZIL SOUTH AFRICA JAPAN Table 2 AC INPUT CORD LENGTH North America 1,830 mm ±30 Europe 1,830 mm ±30 United Kingdom 1,830 mm ±30 Australia 1,830 mm ±30 China 1,830 mm ±30 South Korea 1,830 mm ±50 Brazil 1,830 mm ±30 South Africa 1,830 mm ±50 Japan 1,830 mm ±30 cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI120G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 09/22/2023 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 09/13/2021 1.01 input voltage updated 01/18/2023 1.02 pn key updated 07/11/2023 safety marks updated 09/22/2023 1.03 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.