SDI160-48-U-P51

Additional Resources: Product Page | 3D Model date 01/18/2023 page 1 of 5 SERIES: SDI160-U │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • meets Level VI and CoC Tier 2 efficiency up to 160 W power universal input (100~240 Vac) single regulated outputs over voltage and short circuit protections meets UL/cUL 62368 & EN 62368 power factor correction custom designs available MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) SDI160-12-U-P51 12 12.5 150.0 120 VI SDI160-19-U-P51 19 8.4 159.6 190 VI SDI160-24-U-P51 24 6.6 158.4 240 VI SDI160-48-U-P51 48 3.3 158.4 480 VI SDI160-56-U-P51 56 2.86 160.1 560 VI Notes: efficiency level2 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF multilayer ceramic and 10 μF low ESR electrolytic capacitors. 2. CoC Tier 2 compliant PART NUMBER KEY SDI160 - XX - UX- P51- CXX Reserved for Custom Configurations Base Number DC Plug Type Output Voltage AC Inlet Type: IEC320/C14 Input cable: “Blank” = No Cable C = North America input cable 2 = Europe input cable 3 = United Kingdom input cable 4 = Australia input cable 5 = China input cable 6 = South Korea input cable 7 = Brazil input cable 8 = South Africa input cable 9 = Japan input cable cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI160-U │ DESCRIPTION: AC-DC POWER SUPPLY date 01/18/2023 │ page 2 of 5 INPUT parameter min typ max units voltage conditions/description 90 100~240 264 Vac frequency 47 50~60 63 Hz 2.2 A current inrush current at 230 Vac, full load, 25°C, cold start leakage current power factor full load no load power consumption at 230 Vac 100 A 3.5 mA 0.15 W max units 0.9 OUTPUT parameter conditions/description min regulation typ ±5 % PROTECTIONS parameter conditions/description min over voltage protection over current protection short circuit protection output shut down, auto recovery typ max units output shut down, latch 150 % output shut down, auto recovery 150 % max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute input to frame ground at 10 mA for 1 minute isolation resistance input to output at 500 Vdc input to frame ground at 500 Vdc safety marks UL/cUL (North America), CE (Europe), FCC (USA) safety approvals 62368: UL/cUL, EN UKCA EMI/EMC FCC Part 15 Class B, EN 55032:2012 +AC:2013 Class B, AS/NZS CISPR 32:2015 Class B, EN55024:2010 MTBF as per Telcordia SR-332, 25°C RoHS yes typ 3,000 1,500 Vac Vac 10 10 MΩ MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature typ max units 0 40 °C -20 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI160-U │ DESCRIPTION: AC-DC POWER SUPPLY date 01/18/2023 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 175.2 x 74.0 x 42.0 inlet plug IEC320/C14 min typ units mm weight 700 MECHANICAL DRAWING units: mm tolerance: ±1.0 mm DC CORD units: mm Table 1 MODEL NO. max CABLE CORD LENGTH SDI160-12-U-P51 UL2464, 16 AWG 1,200 mm ±50 SDI160-19-U-P51 UL2464, 16 AWG 1,500 mm ±50 SDI160-24-U-P51 UL2464, 16 AWG 1,500 mm ±50 SDI160-48-U-P51 UL2464, 18 AWG 1,500 mm ±50 SDI160-56-U-P51 UL2464, 18 AWG 1,500 mm ±50 cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI160-U │ DESCRIPTION: AC-DC POWER SUPPLY date 01/18/2023 │ page 4 of 5 AC CORD units: mm cord length NORTH AMERICA EUROPE UNITED KINGDOM AUSTRALIA CHINA SOUTH KOREA BRAZIL SOUTH AFRICA JAPAN Table 2 AC INPUT CORD LENGTH North America 1,830 mm ±30 Europe 1,830 mm ±30 United Kingdom 1,830 mm ±30 Australia 1,830 mm ±30 China 1,830 mm ±30 South Korea 1,830 mm ±50 Brazil 1,830 mm ±30 South Africa 1,830 mm ±50 Japan 1,830 mm ±30 cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI160-U │ DESCRIPTION: AC-DC POWER SUPPLY date 01/18/2023 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 09/28/2020 1.01 dc cord drawing update 10/14/2020 1.02 output plug polarity added 01/12/2021 1.03 UKCA added to specification 08/11/2021 1.04 dc cord tolerance updated for 48V model 06/07/2022 1.05 input voltage updated 01/18/2023 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.