SDI200-12-U-P51

Additional Resources: Product Page | 3D Model date 08/11/2021 page 1 of 5 SERIES: SDI200-U │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • level VI efficiency 200 W power universal input (90~264 Vac) single regulated outputs over voltage and short circuit protections UL/cUL (60950-1 & 62368-1), PSE safety approvals power factor correction custom designs available MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) 12 16 192 150 VI2 SDI200-12-U SDI200-13.5-U efficiency level 13.5 14 189 200 VI SDI200-19-U 19 10.5 200 190 VI SDI200-24-U 24 8.3 200 240 VI2 SDI200-48-U 48 4.17 200 480 VI2 SDI200-56-U 56 3.58 200 560 VI2 Notes: 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, output terminated with 0.1 µF multilayer ceramic and 10 µF low ESR electrolytic capacitors. 2. CoC Tier 2 compliant. PART NUMBER KEY SDI200 - XX - UX - P51 - CXX Base Number Output Voltage AC Inlet Type: IEC320/C14 Reserved for Custom Configurations Input Cable: “Blank” = No Cable C = North America input cable 2 = Europe input cable 3 = United Kingdom input cable 4 = Australia input cable 5 = China input cable 6 = South Korea input cable 7 = Brazil input cable 8 = South Africa input cable 9 = Japan input cable cui.com DC Plug Type: 4 Pin Power DIN Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI200-U │ DESCRIPTION: AC-DC POWER SUPPLY date 08/11/2021 │ page 2 of 5 INPUT parameter conditions/description min voltage 90 frequency 47 typ current inrush current at 240 Vac, full load, 25°C, cold start leakage current power factor correction at 115/230 Vac, full load no load power consumption 12, 24, 48, 56 Vdc output models all other models max units 264 Vac 63 Hz 2.8 A 100 A 3.5 mA 0.15 0.21 W W max units 0.9 OUTPUT parameter conditions/description min regulation typ ±5 % PROTECTIONS parameter conditions/description max units over voltage protection output latch min typ 150 % over current protection output shut down, auto recovery 150 % short circuit protection output shut down over temperature protection output latch max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute input to ground at 10 mA for 1 minute isolation resistance input to output at 500 Vdc input to ground at 500 Vdc safety approvals UL/cUL (60950-1, 62368-1), PSE, UKCA EMI/EMC FCC Part 15B Class B, CE MTBF as per Telcordia SR-332, 25°C RoHS yes typ 3,000 1,500 Vac Vac 10 10 MΩ MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature typ max units 0 40 °C -20 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI200-U │ DESCRIPTION: AC-DC POWER SUPPLY date 08/11/2021 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 183.2 x 81.0 x 42.3 inlet plug IEC320/C14 weight without ac cord min max units mm 820 MECHANICAL DRAWING units: mm tolerance: ±1.0 mm DC CORD units: mm typ cord length Table 1 MODEL NO. CABLE CORD LENGTH SDI200-12-U UL2464, 16 AWG, 4C 1,200 mm ±30 SDI200-13.5-U UL2464, 16 AWG, 4C 1,200 mm ±30 SDI200-19-U UL2464, 16 AWG, 4C 1,500 mm ±30 SDI200-24-U UL2464, 16 AWG, 4C 1,500 mm ±30 SDI200-48-U UL2464, 18 AWG, 4C 1,500 mm ±30 SDI200-56-U UL2464, 18 AWG, 4C 1,500 mm ±30 cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI200-U │ DESCRIPTION: AC-DC POWER SUPPLY date 08/11/2021 │ page 4 of 5 AC CORD units: mm cord length NORTH AMERICA EUROPE UNITED KINGDOM AUSTRALIA CHINA SOUTH KOREA BRAZIL SOUTH AFRICA JAPAN Table 2 AC INPUT CORD LENGTH North America 1,830 mm ±30 Europe 1,830 mm ±30 United Kingdom 1,830 mm ±30 Australia 1,830 mm ±30 China 1,830 mm ±30 South Korea 1,830 mm ±50 Brazil 1,830 mm ±30 South Africa 1,830 mm ±50 Japan 1,830 mm ±30 cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI200-U │ DESCRIPTION: AC-DC POWER SUPPLY date 08/11/2021 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 08/28/2018 1.01 company logo updated 07/23/2020 1.02 UKCA added to specification 08/11/2021 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.