SDI300G-19-U-P219

Additional Resources: Product Page | 3D Model date 05/03/2023 page 1 of 5 SERIES: SDI300G-U │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • • • GaN technology compact size 300 W power single regulated outputs over voltage, over current, over temperature and short circuit protections UL/cUL (62368-1) CE certified level VI efficiency power factor correction custom designs available MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) SDI300G-12-U 12 24.0 288.0 120 VI SDI300G-15-U 15 20.0 300.0 150 VI SDI300G-19-U 19 15.79 300.01 190 VI SDI300G-24-U 24 12.5 300.0 240 VI SDI300G-48-U 48 6.25 300.0 480 VI SDI300G-56-U 56 5.36 300.16 560 VI Notes: efficiency level 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF multilayer ceramic and 47 μF low ESR electrolytic capacitors. PART NUMBER KEY SDI300G - XX - U - P219 - CXX Base Number Output Voltage AC Inlet Type: IEC320/C14 cui.com Reserved for Custom Configurations Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI300G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/03/2023 │ page 2 of 5 INPUT parameter conditions/description voltage see derating curve frequency min typ max units 85 100~240 264 Vac 47 50~60 63 Hz 3.5 A current inrush current at 240 Vac, full load, 25°C, cold start leakage current no load power consumption at 115 & 230 Vac power factor at 115 & 230 Vac, full load 0.9 conditions/description min 150 A 3.5 mA 0.5 W max units OUTPUT parameter regulation typ ±5 % PROTECTIONS parameter conditions/description over voltage protection over current protection short circuit protection auto recovery over temperature protection output shut down min typ max units latch 150 % auto recovery 180 % max units SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output at 10 mA for 1 minute input to ground at 10 mA for 1 minute min isolation resistance input to output at 500 Vdc input to ground at 500 Vdc safety approvals 62368: UL/cUL UKCA EMI/EMC CE, FCC Part 15 Class B, ICES-003, EN 55032, EN 55036, EN 61000-3-2, EN 61000-3-3 MTBF as per Telcordia SR-332, 25°C RoHS yes typ 3,000 1,770 Vac Vac 10 10 MΩ MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min max units operating temperature see derating curve -20 40 °C storage temperature typ -20 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI300G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/03/2023 │ page 3 of 5 DERATING CURVES MECHANICAL parameter conditions/description dimensions 183.0 (L) x 85.0 (W) x 35.0 (H) min dc output plug 6 pin housing, Molex p/n: 39-01-2065 inlet plug C13 weight 12, 15, 19 Vdc output models 24, 48, 56 Vdc output models typ units: mm tolerance: ±1.0 mm Top-View Side-View Front-View cui.com units mm 1100 1000 MECHANICAL DRAWING max g g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI300G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/03/2023 │ page 4 of 5 DC CORD units: mm Table 1 CABLE CORD LENGTH SDI300G-12-U MODEL NO. Black, UL2464, 16 AWG 1,000 mm ±50 SDI300G-15-U Black, UL2464, 16 AWG 1,000 mm ±50 SDI300G-19-U Black, UL2464, 16 AWG 1,000 mm ±50 SDI300G-24-U Black, UL2464, 16 AWG 1,200 mm ±50 SDI300G-48-U Black, UL2464, 18 AWG 1,200 mm ±50 SDI300G-56-U Black, UL2464, 18 AWG 1,200 mm ±50 Output cable plug pin assignment Table 2 PIN ASSIGNMENT PIN cui.com OUTPUT VOLTAGE 12V/15V/19V 24V/48V/56V P1 +Vout +Vout P2 +Vout n.c. P3 +Vout +Vout P4 -Vout -Vout P5 -Vout NC P6 -Vout -Vout Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDI300G-U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/03/2023 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 07/23/2021 1.01 UKCA added to specification 08/12/2021 1.02 output plug updated in the mechanical section 08/31/2021 1.03 part numbers updated in the model table 10/14/2021 1.04 CE added 04/07/2022 1.05 features updated 06/22/2022 1.06 inlet plug updated 08/12/2022 1.07 input voltage and frequency updated 01/18/2023 1.08 dc cord connector updated 04/20/2023 1.09 medical icon added 05/03/2023 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.