SDM300G-48-UR-P219

Additional Resources: Product Page | 3D Model date 05/17/2023 page 1 of 6 SERIES: SDM300G-UR │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • • • GaN technology compact size 300 W power universal input (85~264 Vac) single regulated outputs over voltage, over current, over temperature and short circuit protections UL/cUL (60601), TUV level VI efficiency power factor correction custom designs available MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) SDM300G-12-UR 12 24.0 288 120 VI SDM300G-15-UR 15 20.0 300 150 VI SDM300G-19-UR 19 15.79 300 190 VI SDM300G-24-UR 24 12.5 300 240 VI SDM300G-48-UR 48 6.25 300 480 VI Notes: efficiency level 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF multilayer ceramic and 47 μF low ESR electrolytic capacitors. PART NUMBER KEY SDM300G - XX - UR X - P219- CXX Base Number Output Voltage AC Inlet Type: IEC320/C18 Reserved for Custom Configurations Input Cable: “Blank” = No Cable C = North America input cable 2 = Europe input cable 3 = United Kingdom input cable 4 = Australia input cable 5 = China input cable 6 = South Korea input cable 7 = Brazil input cable 8 = South Africa input cable 9 = Japan input cable cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDM300G-UR │ DESCRIPTION: AC-DC POWER SUPPLY date 05/17/2023 │ page 2 of 6 INPUT parameter conditions/description min typ max units 85 100~240 264 Vac frequency 47 50~60 63 Hz current 1.5 3.5 A voltage inrush current at 240 Vac, full load, 25°C, cold start leakage current no load power consumption at 115 & 230 Vac power factor at 115 & 230 Vac, full load 0.9 conditions/description min 150 A 0.1 mA 0.5 W max units OUTPUT parameter regulation typ ±5 % PROTECTIONS parameter conditions/description over voltage protection over current protection short circuit protection auto recovery over temperature protection output shut down min typ max units latch 150 % auto recovery 180 % max units SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output at 10 mA for 1 minute min isolation resistance input to output at 500 Vdc safety approvals UL/cUL 60601, TUV, UKCA EMI/EMC CE, FCC MTBF as per Telcordia SR-332, 25°C RoHS yes typ 4,000 Vac 10 MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature 60°C max at 50% load, see derating curve storage temperature typ max units -20 40 °C -25 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDM300G-UR │ DESCRIPTION: AC-DC POWER SUPPLY date 05/17/2023 │ page 3 of 6 DERATING CURVES MECHANICAL parameter conditions/description dimensions 183.0 (L) x 85.0 (W) x 35.0 (H) min dc output plug 6 pin housing weight 12, 15 & 19 Vdc output models 24, 48 Vdc output models typ units: mm tolerance: ±1.0 mm Top-View Side-View Front-View cui.com units mm 1100 1000 MECHANICAL DRAWING max g g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDM300G-UR │ DESCRIPTION: AC-DC POWER SUPPLY date 05/17/2023 │ page 4 of 6 DC CORD units: mm Table 1 MODEL NO. CABLE CORD LENGTH SDM300G-12-UR Black, UL2464, 16 AWG 1,000 mm ±50 SDM300G-15-UR Black, UL2464, 16 AWG 1,000 mm ±50 SDM300G-19-UR Black, UL2464, 16 AWG 1,000 mm ±50 SDM300G-24-UR Black, UL2464, 16 AWG 1,200 mm ±50 SDM300G-48-UR Black, UL2464, 18 AWG 1,200 mm ±50 Output cable plug pin assignment Table 2 PIN ASSIGNMENT PIN cui.com OUTPUT VOLTAGE 12V/15V/19V 24V/48V P1 +Vout +Vout P2 +Vout NC P3 +Vout +Vout P4 -Vout -Vout P5 -Vout NC P6 -Vout -Vout Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDM300G-UR │ DESCRIPTION: AC-DC POWER SUPPLY date 05/17/2023 │ page 5 of 6 AC CORD units: mm cord length NORTH AMERICA EUROPE UNITED KINGDOM AUSTRALIA CHINA SOUTH KOREA BRAZIL SOUTH AFRICA JAPAN Table 2 AC INPUT CORD LENGTH North America 1,830 mm ±30 Europe 1,830 mm ±30 United Kingdom 1,830 mm ±30 Australia 1,830 mm ±30 China 1,830 mm ±30 South Korea 1,830 mm ±50 Brazil 1,830 mm ±30 South Africa 1,830 mm ±50 Japan 1,830 mm ±30 cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SDM300G-UR │ DESCRIPTION: AC-DC POWER SUPPLY date 05/17/2023 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 06/24/2022 1.01 input voltage and frequency updated 02/02/2023 1.02 medical icon added 05/17/2023 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.