SJ1-3535NS

Additional Resources: Product Page | 3D Model | PCB Footprint date 02/10/2020 page 1 of 3 SERIES: SJ1-353XNS │ DESCRIPTION: AUDIO JACK FEATURES • shielded • low profile design • switch options include: – no switch – tip switch – tip and ring switch RoHS PART NUMBER KEY SJ1 - 353 X NS Base Number Switch Options 3 = no switch 4 = tip switch 5 = tip and ring switch SPECIFICATIONS parameter conditions/description min rated input voltage typ 12 rated input current contact resistance between terminal and mating plug between terminal in a closed circuit* insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute 0.3 -25 life A 50 30 mΩ mΩ 500 Vac 3 kg 500 g 85 5,000 RoHS Notes: Vdc MΩ any direction for 10 seconds operating temperature units 1 100 insertion/withdrawal force terminal strength max °C cycles yes *When measured at a current of less than 100 mA / 1 kHz SOLDERABILITY parameter conditions/description min typ max units wave soldering dipped in solder pot for 5±0.5 seconds at 255 260 265 °C cuidevices.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Devices │ MODEL: SJ1-353XNS │ DESCRIPTION: AUDIO JACK date 02/10/2020 page 2 of 3 MECHANICAL DRAWING units: mm[inches] TOLERANCE: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm MATERIAL PLATING terminal 1 brass tin terminal 2 brass tin terminal 3 brass tin terminal 4 brass tin terminal 5 brass tin spring stainless steel bushing brass nickel shield cold rolled steel nickel plastic PBT 9.7 0.38 5.60 0.22 3.6 0.14 14.9 0.59 6.0 0.24 3.600 0.14 12.7 0.50 0.3 7.0 0.28 0.15 3.3 0.13 0.3 (TYP) 1.50 0.06 (TYP) 8.9 0.35 2.5 0.10 1.5 0.06 11.6 0.46 0.9 0.04 7.9 0.31 1.00X2.00 (8 PLCS) 6.1 0.24 2.4 0.09 2.0 0.08 1.5 0.06 2 1 2 8.6 0.34 4 5 3 3.55 3.55 0.14 3 5 1 2.0 0.08 4 8.6 0.34 2.4 0.09 6.1 0.24 7.9 0.31 11.6 0.46 2.5 0.10 8.9 0.35 0.9 0.04 Model No. SJ1-3533NS PCB LAYOUT TOP VIEW SJ1-3534NS 1 3 1 3 2 4 2 SJ1-3535NS 1 3 5 4 2 Schematic PIN 14 Ø 3.5 MATING PLUG cuidevices.com 1 sleeve sleeve sleeve 2 tip tip tip 3 ring ring ring 4 NP tip switch tip switch 5 NP NP ring switch Additional Resources: Product Page | 3D Model CUI Devices │ MODEL: SJ1-353XNS │ DESCRIPTION: AUDIO JACK | PCB Footprint date 02/10/2020 page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 02/01/2006 1.01 new template applied 01/25/2012 1.02 brand update 02/10/2020 The revision history provided is for informational purposes only and is believed to be accurate. CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. cuidevices.com