SJD1-3201-54

Additional Resources: Product Page | 3D Model | PCB Footprint date 10/14/2019 page 1 of 3 MODEL: SJD1-3201-54 │ DESCRIPTION: AUDIO JACK FEATURES • dual port jack - 3.5 mm and 2.5 mm • placement pins for secure PCB mounting • 2 switch design for 3.5 mm port; 1 switch for 2.5 mm port SPECIFICATIONS parameter conditions/description min rated input voltage typ rated input current contact resistance1 between terminal and mating plug between terminal in a closed circuit insulation resistance at 500 Vdc voltage withstand for 1 minute 1 A 50 30 mΩ mΩ MΩ 0.3 operating temperature -25 life at a rate of 24 cycles/minute flammability rating UL94V-0 RoHS yes units Vdc 100 insertion/withdrawal force Note: max 12 500 Vac 3 kg 85 5,000 °C cycles 1. When measured at a current of less than 100 mA/1 kHz 2. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted. SOLDERABILITY parameter conditions/description min typ max units wave soldering dipped in solder pot for 5 ±0.5 seconds 255 260 265 °C cuidevices.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Devices │ MODEL: SJD1-3201-54 │ DESCRIPTION: AUDIO JACK date 10/14/2019│ page 2 of 3 MECHANICAL DRAWING units: mm tolerance: X.X ±0.2 mm X.XX ±0.10 mm X.XXX ±0.050 mm PCB: ±0.05 mm Model No. 3 2 21 23 22 1 3 11 10 2 11 Ø2.5 MATING PLUG Ø2.5 terminal 1 copper alloy tin terminal 2 copper alloy tin terminal 3 copper alloy tin terminal 10 brass tin terminal 11 brass tin terminal 20 brass tin terminal 21 copper alloy tin terminal 22 copper alloy tin terminal 23 copper alloy tin bushing brass nickel plastic PBT PIN Ø3.5 14 Ø3.5 MATING PLUG PLATING SJD1-3201-54 Schematic 1 MATERIAL 21 23 20 22 1 sleeve 2 tip 3 ring 10 tip switch 11 ring switch 20 tip switch 21 sleeve 22 tip 23 ring cuidevices.com Recommended PCB Layout Top View Additional Resources: Product Page | 3D Model CUI Devices │ MODEL: SJD1-3201-54 │ DESCRIPTION: AUDIO JACK | PCB Footprint date 10/14/2019│ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 08/07/2007 1.01 updated pin numbering 01/15/2008 1.02 changed part mold tooling 04/07/2017 brand update 10/14/2019 1.03 The revision history provided is for informational purposes only and is believed to be accurate. CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. cuidevices.com