SMM12-12-KB-P5

Additional Resources: Product Page MODEL: SMI-AU-5 │ DESCRIPTION: AUSTRALIA BLADE MECHANICAL DRAWING units: mm tolerance: 0.2~2: ±0.15 mm 2.0~15: ±0.25 mm 15~30.00: ±0.30 mm 30~50.00: ±0.35 mm unless otherwise noted cui.com date 02/06/2019 page 1 of 2 Additional Resources: Product Page CUI Inc │ MODEL: SMI-AU-5 │ DESCRIPTION: AUSTRALIA BLADE date 02/06/2019 │ page 2 of 2 REVISION HISTORY rev. 1.0 description date initial release 02/06/2019 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.