SWI10B-5-EW-I38

Additional Resources: Product Page | 3D Model date 11/27/2020 page 1 of 4 SERIES: SWI10B-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • • • up to 10 W continuous power DoE Level VI efficiency universal input voltage range ultra-compact case no load power consumption < 0.075 W over voltage, over current, and short circuit protections CE safety approval certified to IEC 62368-1 standards Class II construction black and white case options available MODEL SWI10B-5-EX-I38 Notes: input voltage input frequency output voltage output current output power ripple and noise1 efficiency level no load power consumption range (Vac) range (Hz) nom (Vdc) max (A) max (W) max (mVp-p) average2 (%) 10% (%) typ (W) 90 ~ 264 47 ~ 63 5 2 10 300 83.3 80.0 0.05 1. At full load, nominal AC input voltage, 25°C, 20 MHz bandwidth oscilloscope, output terminated with 0.1 µF and 10 µF capacitors to ground. 2. Average efficiency is measured at 25%, 50%, 75%, and 100% load. PART NUMBER KEY SWI10B - 5 - EX - I38 - CXX Reserved for Custom Configurations Base Number Output Voltage AC Input Type: European Case color: B - Black W - White cui.com USB Type A Inlet Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI10B-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 11/27/2020 │ page 2 of 4 INPUT parameter conditions/description min voltage typ 90 frequency 47 current at nominal input voltage leakage current at nominal input voltage & frequency no load power consumption at 115/230 Vac max units 264 Vac 63 Hz 0.3 A 0.25 mA 0.075 W max units OUTPUT parameter conditions/description min regulation typ ±5 % start-up time at nominal input voltage 3 s rise time at nominal input voltage 100 ms hold-up time nominal input, full load 5 ms PROTECTIONS parameter conditions/description min typ over voltage protection over current protection output shut down, auto recovery short circuit protection yes max units 10 Vdc 3.0 A max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute safety approvals CE EMI/EMC EN55032:2015, EN55035:2017 MTBF as per Telcordia SR-332 (Issue 2), at 115/230 Vac, full load, 0°C~40°C RoHS yes typ 3,000 4,242 Vac Vdc 50,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature typ max units 0 40 °C -20 60 °C operating humidity non-condensing 20 85 % storage humidity non-condensing 5 95 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI10B-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 11/27/2020 │ page 3 of 4 MECHANICAL parameter conditions/description dimensions 89.2 x 37 x 23.5 inlet plug EU, 2-pin min typ max units mm weight 39 MECHANICAL DRAWING units: mm cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI10B-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 11/27/2020 │ page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 04/22/2020 1.01 model table updated 11/27/2020 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.