SWI10B-5-NB-I38

Additional Resources: Product Page | 3D Model date 06/01/2020 page 1 of 4 SERIES: SWI10B-N-USB │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • • • up to 10 W continuous power DoE Level VI efficiency universal input voltage range ultra-compact case no load power consumption < 0.075 W over voltage, over current, and short circuit protections UL/cUL & FCC safety approvals certified to IEC 62368-1 standards Class II construction black and white case options available MODEL SWI10B-5-NX-I38 Notes: output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) 5 2 10 300 efficiency level VI 1. At full load, 25°C, at 115/230 Vac input, 20 MHz bandwidth oscilloscope, output terminated with 0.1 µF and 10 µF capacitors. PART NUMBER KEY SWI10B - 5 - NX - I38 - CXX Reserved for Custom Configurations Base Number Output Voltage AC Input Type: North America cui.com Case color: B - Black W - White USB Type A Inlet Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI10B-N-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 06/01/2020 │ page 2 of 4 INPUT parameter conditions/description min voltage typ 90 frequency 47 current at nominal input voltage leakage current at nominal input voltage & frequency no load power consumption at 115/230 Vac max units 264 Vac 63 Hz 0.3 A 0.25 mA 0.075 W max units OUTPUT parameter conditions/description min regulation typ ±5 % start-up time at nominal input voltage 3 s rise time at nominal input voltage 100 ms hold up time 5 ms PROTECTIONS parameter conditions/description min typ over voltage protection over current protection output shut down, auto recovery short circuit protection yes max units 10 Vdc 3.0 A max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute safety approvals UL/cUL EMI/EMC FCC MTBF as per Telcordia SR-332 (Issue 2), at 115/230 Vac, full load, 0°C~40°C RoHS yes typ 3,000 4,242 Vac Vdc 50,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature typ max units 0 40 °C -20 60 °C operating humidity non-condensing 20 85 % storage humidity non-condensing 5 95 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI10B-N-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 06/01/2020 │ page 3 of 4 MECHANICAL parameter conditions/description dimensions 68.7 x 37 x 23.5 inlet plug North America, 2-pin min typ 32 MECHANICAL DRAWING units: mm Output Voltage 1 +5V 2 Short 3 Short 4 GND +5 units mm weight PIN max 1 4 GND cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI10B-N-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 06/01/2020 │ page 4 of 4 REVISION HISTORY rev. 1.0 description date initial release 06/01/2020 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.