SWI12-12-E-ST

Additional Resources: Product Page | 3D Model date 04/27/2022 page 1 of 5 SERIES: SWI12-E │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • DoE Level VI, CoC Tier 2 efficiency up to 12 W power universal input (90~264 Vac) single regulated output from 5~24 Vdc over voltage, over current, and short circuit protections CE safety approval custom designs available EN 62368 compliant MODEL input voltage input frequency output voltage output current output power ripple and noise1 range (Vac) range (Hz) nom (Vdc) max (A) max (W) max (mVp-p) average3 (%) 10% (%) typ (W) SWI12-5-E 90 ~ 264 47 ~ 63 5 2.5 12.5 100 81.1 76.4 0.04 SWI12-12-E 90 ~ 264 47 ~ 63 12 1.0 12.0 120 83.5 75.3 0.06 SWI12-24-E 90 ~ 264 47 ~ 63 24 0.5 12.0 240 86.0 75.9 0.07 Notes: efficiency level2 no load power consumption 1. At full load, nominal AC input voltage, 25°C, 20 MHz bandwidth oscilloscope, output terminated with 0.1 µF and 47 µF capacitors to ground. 2. CoC Tier 2 compliant. 3. Average efficiency is measured at 25%, 50%, 75%, and 100% load. PART NUMBER KEY SWI12 - XX - E - XXX - CXX Base Number Reserved for Custom Configurations Output Voltage AC Input Type: Europe cui.com DC Plug Type: XXX = See output plug options on page 4 for more details Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/27/2022 │ page 2 of 5 INPUT parameter conditions/description min voltage 90 frequency 47 typ current inrush current at 100 Vac, full load, 25°C, cold start at 240 Vac, full load, 25°C, cold start leakage current no load power consumption at 115/230 Vac max units 264 Vac 63 Hz 0.31 A 30 60 A A 0.25 mA 0.075 W max units OUTPUT parameter conditions/description min regulation typ ±5 % PROTECTIONS parameter conditions/description over voltage protection min typ max units output shut down 180 % over current protection output shut down, auto recovery 5 Vdc model 12 Vdc model 24 Vdc model 5.0 3.0 1.5 A A A short circuit protection output shut down, auto recovery max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute isolation resistance input to output at 500 Vdc safety approvals EN 62368, LPS EMI/EMC CE MTBF as per Telcordia SR-332, at 25°C RoHS 2011/65/EU typ 3,000 Vac 10 MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature max units 0 typ 40 °C -20 80 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/27/2022 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 72 x 34 x 80 inlet plug Europe weight 5 Vdc model 12 Vdc model 24 Vdc model min typ max units mm 156 118 110 MECHANICAL DRAWING units: mm tolerance: ±0.5 mm DC CORD units: mm Table 1 MODEL NO. CABLE CORD LENGTH SWI12-5-E UL2468, 16 AWG 1,500 mm ±30 SWI12-12-E UL2468, 22 AWG 1,500 mm ±30 SWI12-24-E UL2468, 22 AWG 1,500 mm ±30 cui.com g g g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/27/2022 │ page 4 of 5 DC PLUG TYPE PART NUMBER KEY XXX Plug Polarity: P = Center Positive Plug Code: X = Choose a code from the options below Plug Angle: “blank” = Straight R = Right Angle N = Center Negative Plug Polarity Code Dimensions (mm) Plug Angle Center Pos. Center Neg. Option Type A B C Straight Right ● ● 5 Standard 5.5 2.1 9.5 ● ● ● ● 6 Standard 5.5 2.5 9.5 ● ● ● ● 7 Standard 3.5 1.35 9.5 ● ● ● ● 8 Standard 3.8 1.35 9.5 ● ● ● ● 9 Standard 3.8 1.05 9.5 ● ● ● ● 10 Locking2 5.5 2.1 9.5 ● N/A ● ● 11 Locking2 5.5 2.5 9.5 ● N/A ● ● 12 EIAJ-1 2.35 0.7 9.5 ● ● ● ● 13 EIAJ-2 4.0 1.7 9.5 ● ● ● ● 14 EIAJ-3 4.75 1.7 9.5 ● ● N/A ST N/A N/A N/A Stripped & Tinned 1. Contact CUI for additional plug options 2. Maximum insertion depth is 10mm Standard EIAJ Straight C C Straight Locking Right Angle (R) Stripped & Tinned 25±5 2.5±0.3 5±5 A B C A A Right Angle (R) C B B A A B C B Note: cui.com 10±2 Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI12-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/27/2022 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 05/04/2015 1.01 changed wire gauge on 5 Vdc models, updated datasheet 09/15/2016 1.02 added 24 Vdc output model 03/13/2017 1.03 updated weight detail 06/08/2017 1.04 company logo updated 09/18/2020 1.05 model table updated 11/27/2020 1.06 safeties updated 12/09/2020 1.07 plug polarity symbols updated 09/16/2021 1.08 dc plugs updated 04/27/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.