SWI3-5-E-MUB

Additional Resources: Product Page | 3D Model date 04/25/2022 page 1 of 5 SERIES: SWI3-E │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • • up to 3 W continuous power IEC 62368 compliant CoC Tier 2 compliant universal input voltage range ultra-compact case no load power consumption < 0.075 W over voltage, over current, and short circuit protections CE, GS safety approvals Class II construction MODEL SWI3-5-E Notes: input voltage input frequency output voltage output current output power ripple and noise1 efficiency level2 no load power consumption range (Vac) range (Hz) nom (Vdc) max (A) max (W) max (mVp-p) average3 (%) 10% (%) typ (W) 90 ~ 264 47 ~ 63 5 0.6 3 150 74.9 66.2 0.05 1. At full load, nominal AC input voltage, 25°C, 20 MHz bandwidth oscilloscope, output terminated with 0.1 µF and 10 µF capacitors to ground. 2. CoC Tier 2 compliant. 3. Average efficiency is measured at 25%, 50%, 75%, and 100% load. PART NUMBER KEY SWI3 - XX - E - XXX - CXX Reserved for Custom Configurations Base Number Output Voltage AC Input Type: Europe cui.com DC Plug Type: XXX = See output plug options on page 4 for more details Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI3-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/25/2022 │ page 2 of 5 INPUT parameter conditions/description min voltage typ 90 frequency 47 current at nominal input voltage leakage current at nominal input voltage & frequency no load power consumption at 115/230 Vac, 60/50 Hz max units 264 Vac 63 Hz 0.2 A 0.25 mA 0.075 W OUTPUT parameter conditions/description min line regulation load regulation start-up time max units 4.9 typ 5.4 Vdc 4.9 5.4 Vdc 3 s max units 1 A max units at 115 Vac PROTECTIONS parameter conditions/description over current protection auto recovery min typ short circuit protection SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute safety approvals GS (EN 62368) EMI/EMC CE (EN 55032, CISPR 32, EN 61000-3-2, EN 61000-3-3, EN 55024, CISPR 24) MTBF as per Telcordia SR-332 (Issue 2), at 115/230 Vac, full load, 0°C~40°C RoHS 2011/65/EU typ 3,000 4,242 Vac Vdc 50,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature max units 0 typ 40 °C -20 60 °C operating humidity non-condensing 20 85 % storage humidity non-condensing 5 95 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI3-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/25/2022 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 54.0 x 29.5 x 56.0 inlet plug Europe min typ max units mm weight 51 MECHANICAL DRAWING units: mm DC CORD units: mm Table 1 MODEL NO. CABLE CORD LENGTH SWI3-5-E UL1185, 24 AWG 1,500 mm ±50 cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI3-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/25/2022 │ page 4 of 5 DC PLUG TYPE PART NUMBER KEY XXX Plug Polarity: P = Center Positive Plug Code: X = Choose a code from the options below Plug Angle: “blank” = Straight R = Right Angle N = Center Negative Plug Polarity Code Dimensions (mm) Plug Angle Center Pos. Center Neg. Option Type A B C Straight Right ● ● 5 Standard 5.5 2.1 9.5 ● ● ● ● 6 Standard 5.5 2.5 9.5 ● ● ● ● 7 Standard 3.5 1.35 9.5 ● ● ● ● 8 Standard 3.8 1.35 9.5 ● ● ● ● 9 Standard 3.8 1.05 9.5 ● ● ● ● 10 Locking2 5.5 2.1 9.5 ● N/A ● ● 11 Locking2 5.5 2.5 9.5 ● N/A ● ● 12 EIAJ-1 2.35 0.7 9.5 ● ● ● ● 13 EIAJ-2 4.0 1.7 9.5 ● ● ● ● 14 EIAJ-3 4.75 1.7 9.5 ● ● N/A N/A ST N/A N/A N/A MUB ● N/A N/A USB Micro USB Type B 1. Contact CUI for additional plug options 2. Maximum insertion depth is 10mm Locking C B A B C Right Angle (R) C A C Straight Straight Right Angle (R) Stripped & Tinned USB 5.8±0.5 2.5±0.3 A B C EIAJ A A B Standard B Note: Stripped & Tinned P5(-) cui.com P1(+) Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI3-E │ DESCRIPTION: AC-DC POWER SUPPLY date 04/25/2022 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 09/14/2017 1.01 company logo updated 09/21/2020 1.02 logo and model table updated 11/27/2020 1.03 safety line updated 12/09/2020 1.04 plug polarity symbols updated 09/16/2021 1.05 dc plugs updated 04/25/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.