SWI6-7.5-E-P5R

Additional Resources: Product Page | 3D Model date 06/15/2022 page 1 of 5 SERIES: SWI6-E │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • up to 6 W continuous power DOE Level VI, CEC, ErP Stage 2 no load power consumption < 0.1 W compact size universal input voltage range over voltage, over current, and short circuit protections CE safety approvals EN 62368 compliant MODEL input voltage input frequency output voltage output current output power ripple and noise1 efficiency level no load power consumption range (Vac) range (Hz) nom (Vdc) max (A) max (W) max (mVp-p) average2 (%) 10% (%) typ (W) SWI6-3.3-E 90 ~ 264 47 ~ 63 3.3 1.5 4.95 100 74.0 63.3 0.03 SWI6-5-E 90 ~ 264 47 ~ 63 5 1.5 7.5 100 77.5 66.7 0.05 SWI6-5.9-E 90 ~ 264 47 ~ 63 5.9 1.2 7.08 100 78.7 65.0 0.05 SWI6-7.5-E 90 ~ 264 47 ~ 63 7.5 1.0 7.5 100 80.3 70.1 0.04 SWI6-9-E 90 ~ 264 47 ~ 63 9 0.67 6.03 100 79.9 66.6 0.04 SWI6-12-E 90 ~ 264 47 ~ 63 12 0.6 7.2 120 80.9 65.1 0.05 SWI6-15-E 90 ~ 264 47 ~ 63 15 0.5 7.5 150 80.9 63.3 0.06 Notes: 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF multilayer ceramic and 47 μF low ESR electrolytic capacitors. 2. Average efficiency is measured at 25%, 50%, 75%, and 100% load. PART NUMBER KEY SWI6 - XX - E - XXX - CXX Reserved for Custom Configurations Base Number Output Voltage AC Input Type: Europe cui.com DC Plug Type: XXX = See output plug options on page 4 for more details ST = Stripped and Tinned Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI6-E │ DESCRIPTION: AC-DC POWER SUPPLY date 06/15/2022 │ page 2 of 5 INPUT parameter conditions/description min voltage 90 frequency 47 typ current inrush current at 240 Vac, full load, 25°C, cold start leakage current no load power consumption max units 264 Vac 63 Hz 0.19 A 60 A 0.25 mA 0.1 W max units OUTPUT parameter conditions/description min regulation hold-up time typ ±5 at full load % 10 ms PROTECTIONS parameter conditions/description over voltage protection output shut down over current protection output shut down, auto recovery short circuit protection output shut down, auto recovery min typ max units min typ max units SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output at 10 mA for 1 minute isolation resistance input to output at 500 Vdc safety approvals EN 62368 EMI/EMC CE MTBF as per Telcordia SR-332, 25°C RoHS 2011/65/EU 3,000 Vac 10 MΩ 300,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature max units 0 typ 40 °C -20 60 °C operating humidity non-condensing 20 80 % storage humidity non-condensing 10 90 % cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI6-E │ DESCRIPTION: AC-DC POWER SUPPLY date 06/15/2022 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 56 x 28 x 60 inlet plug Europe min typ 96 MECHANICAL DRAWING ~ ~ ~ units: mm DC CORD cord length 80±5 units mm weight units: mm max Table 1 MODEL NO. CABLE CORD LENGTH SWI6-3.3-E UL2468 1,500 mm ±30 SWI6-5-E UL2468 1,500 mm ±30 SWI6-5.9-E UL2468 1,500 mm ±30 SWI6-7.5-E UL2468 1,500 mm ±30 SWI6-9-E UL2468 1,500 mm ±30 SWI6-12-E UL2468 1,500 mm ±30 SWI6-15-E UL2468 1,500 mm ±30 cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI6-E │ DESCRIPTION: AC-DC POWER SUPPLY date 06/15/2022 │ page 4 of 5 DC PLUG TYPE PART NUMBER KEY XXX Plug Polarity: P = Center Positive Plug Code: X = Choose a code from the options below Plug Angle: “blank” = Straight R = Right Angle N = Center Negative Plug Polarity Code Dimensions (mm) Plug Angle Center Pos. Center Neg. Option Type A B C Straight Right ● ● 5 Standard 5.5 2.1 9.5 ● ● ● ● 6 Standard 5.5 2.5 9.5 ● ● ● ● 7 Standard 3.5 1.35 9.5 ● ● ● ● 8 Standard 3.8 1.35 9.5 ● ● ● ● 9 Standard 3.8 1.05 9.5 ● ● ● ● 10 Locking2 5.5 2.1 9.5 ● N/A ● ● 11 Locking2 5.5 2.5 9.5 ● N/A ● ● 12 EIAJ-1 2.35 0.7 9.5 ● ● ● ● 13 EIAJ-2 4.0 1.7 9.5 ● ● ● ● 14 EIAJ-3 4.75 1.7 9.5 ● ● N/A N/A ST N/A N/A N/A N/A MUB USB Micro USB Type B ● N/A N/A N/A CUB USB USB Type C ● N/A Note: Stripped & Tinned 1. Contact CUI for additional plug options 2. Maximum insertion depth is 10mm cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI6-E │ DESCRIPTION: AC-DC POWER SUPPLY date 06/15/2022 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 08/07/2015 1.01 added models 08/12/2015 1.02 updated drawing 12/16/2015 1.03 company logo updated 09/21/2020 1.04 updated dc plug options & model table 12/04/2020 1.05 safeties updated 12/09/2020 1.06 plug polarity symbols updated 09/16/2021 1.07 dc plugs updated 06/15/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.