SWI60C-V-NB-I40

Additional Resources: Product Page | 3D Model date 07/11/2022 page 1 of 4 SERIES: SWI60C-N │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • up to 60 W continuous power meets DoE Level VI efficiency universal input voltage range no load power consumption < 0.21 W over voltage, over current and short circuit protections UL 62368 certified PD 3.0 compliant custom designs available MODEL SWI60C-V-N Notes: output voltage output current output power ripple and noise1 efficiency level2 (Vdc) max (A) max (W) max (mVp-p) min (%) 5 3 15 150 81.39 9 3 27 150 86.62 12 3 36 150 87.40 15 3 45 150 87.73 20 3 60 200 88.0 1. At full load, 25°C, at 115/230 Vac input, 20 MHz bandwidth oscilloscope, output terminated with 0.1 µF and 10 µF capacitors. 2. Average efficiency measured at 25%, 50%, 75%, and 100% load at 115/230 Vac. PART NUMBER KEY SWI60C - V - NX - X - I40 - CXX Reserved for Custom Configurations Base Number AC Input Type: North America Case color: W = White B = Black cui.com DC cord: “blank” = no cord C = Type C Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI60C-N │ DESCRIPTION: AC-DC POWER SUPPLY date 07/11/2022 │ page 2 of 4 INPUT parameter conditions/description min voltage 90 frequency 47 typ current max units 264 Vac 63 Hz 1.5 A inrush current at 240 Vac, 25°C 100 A leakage current at 240 Vac 0.25 mA 0.21 W max units no load power consumption OUTPUT parameter conditions/description min typ line regulation ±2 % load regulation ±5 % start-up time at 100 Vac, full load 3 s rise time at 115 Vac, full load 40 ms hold-up time at 115 Vac, full load 5 ms PROTECTIONS parameter conditions/description min over current protection auto recovery 3.3 short circuit protection auto recovery typ max units 4 A max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output for 5 seconds, 5 mA max safety approvals 62368: ETL EMI/EMC FCC Part 15 Class B MTBF as per Telcordia SR-332 at 25°C, nominal input RoHS yes typ 3,000 Vac 50,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature operating humidity non-condensing DC CORD units: mm cui.com typ max units 0 25 °C -40 85 °C 5 95 % Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI60C-N │ DESCRIPTION: AC-DC POWER SUPPLY date 07/11/2022 │ page 3 of 4 MECHANICAL parameter conditions/description dimensions 65.0 x 65.0 x 28.0 inlet plug North America, 2-pin DC output USB Type C min typ max units mm MECHANICAL DRAWING units: mm units: mm cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: SWI60C-N │ DESCRIPTION: AC-DC POWER SUPPLY date 07/11/2022 │ page 4 of 4 REVISION HISTORY rev. 1.0 description date initial release 07/11/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.