VGS-200C-12

Additional Resources: Product Page | 3D Model date 01/31/2022 page 1 of 6 SERIES: VGS-200C │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • UL/EN/IEC 62368 certified designed to meet IEC/EN 61558, IEC/EN 60335, and GB4943 system requirements short-circuit, over-current, over-voltage, over-temperature protections output adjustable via trimpot +/- 10% RoHS MODEL output voltage output current output power ripple and noise� efficiency2 typ (Vdc) range (Vdc) max (A) max (W) max (mVp-p) typ (%) 5 4.5~5.5 30.0 150.0 150 87.0 VGS-200C-12 12 10.2~13.8 17.0 204.0 150 87.5 VGS-200C-15 15 13.5~18.0 14.0 210.0 150 88.0 VGS-200C-24 24 21.6~28.8 8.8 211.2 150 88.5 VGS-200C-36 36 32.4~39.6 5.9 212.4 200 89.0 VGS-200C-48 48 43.2~52.8 4.4 211.2 200 89.5 VGS-200C-5 Notes: 1. Ripple and noise are measured at 20 MHz BW with 47 uF aluminum electrolytic capacitor and 0.1 uF ceramic capacitor on the output. 2. Measured at 230 Vac. PART NUMBER KEY VGS-200C - XX - X Base Number Output Voltage cui.com A - with terminal cover B - with conformal coating Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VGS-200C │ DESCRIPTION: AC-DC POWER SUPPLY date 01/31/2022 │ page 2 of 6 INPUT parameter conditions/description min max units voltage range ac input, low voltage (switch in position of 115) ac input, high voltage (switch in position of 230) dc input, (switch in position of 230) 90 180 240 132 264 373 Vac Vac Vdc 47 63 Hz 5 3 A A frequency range current at 115 Vac at 230 Vac inrush current at 115 Vac, cold start at 230 Vac, cold start no load power consumption at 230 Vac, 25 °C typ 60 60 A A 0.75 W max units 10,000 4,000 3,300 1,500 1,500 470 μF μF μF μF μF μF OUTPUT parameter conditions/description capacitive load 5 V model 12 V model 15 V model 24 V model 36 V model 48 V model min initial set point acuracy 5 V model, full load range 12 V model, full load range all other models, full load range ±3 ±1.5 ±1 % % % line regulation rated load ±0.5 % load regulation 5 V model, 0~100% load 12 V model, 0~100% load all other models, 0~100% load ±2 ±1 ±0.5 % % % 65 kHz switching frequency hold-up time at 115 Vac at 230 Vac typ 12 16 ms ms PROTECTIONS parameter conditions/description min over current protection auto recovery 110 over voltage protection 5 V model, output shut down, latching 12 V model, output shut down, latching 15 V model, output shut down, latching 24 V model, output shut down, latching 36 V model, output shut down, latching 48 V model, output shut down, latching short circuit protection continuous, auto recovery, hiccup over temperature protection latching typ max units 185 % 8.0 18.0 22.0 33.6 46.8 60.0 Vdc Vdc Vdc Vdc Vdc Vdc max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output, 1 min,