VMS-160-15

date page 07/27/2011 1 of 5 SERIES: VMS-160 │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • • • • Up to 160 W continuous power Industry standard 2” x 4” footprint 18 W/in3 power density Universal input (85-264 Vac / 125-373 Vdc) Single output from 5 to 48 V Active power correction (98%) 12 V auxiliary fan output No minimum load required Over load, over voltage, and short circuit protections Full medical and ITE safety approvals Efficiency up to 90% RoHS MODEL VMS-160-5 VMS-160-12 VMS-160-15 VMS-160-24 VMS-160-48 Notes: 1. 2. 3. 4. output voltage (Vdc) output current max (A) output power max (W) ripple and noise4 max (mVp-p) efficiency typ (%) 5 12 15 24 48 20 13.3 8 6.66 3.33 1002 160 1 50 120 50 240 480 90 90 90 90 90 1603 1601 1601 Total continuous output power will not exceed 160 W forced air (400 LFM), 100 W without fan Total continuous output power will not exceed 100 W forced air (400 LFM), 70 W without fan Total continuous output power will not exceed 120 W forced air (400 LFM), 90 W without fan Measured at 20 MHz, twisted pair with 0.47 μF ceramic and 22 μF tantalum parallel capacitors PART NUMBER KEY VMS-160 - XX Base Number Output Voltage cui.com CUI Inc │ SERIES: VMS-160 │ DESCRIPTION: AC-DC POWER SUPPLY date 07/27/2011 │ page 2 of 5 INPUT parameter voltage frequency current inrush current power factor at 100 Vac, cold start at 200 Vac, cold start at 230 Vac, full load, cold start measured at full load and 115 Vac/60 Hz and 0.85 230 Vac/50 Hz input source input will be less than 0.25Ω, compliant to EN61000-3-2 for harmonic currents 0.98 conditions/description min 90 125 47 typ max 264 373 63 2.5 1.25 units Vac Vdc Hz A A OUTPUT parameter line regulation load regulation temperature coefficient transient response start-up time rise time hold-up time adjustability fan drive 12 Vdc / 500 mA for external fan 0.2 16 ±5 conditions/description low line to high line all other outputs 12 V aux. output min typ ±1 ±1 ±20 0.25 25% Imax to Imax , 0.1 A/μs slew rate, ±5% max. deviation, 1 ms recovery 1 20 s ms ms % max units % % % mV/°C PROTECTION parameter over voltage protection over current protection short circuit protection automatically recovers auto recovery with no damage from a short on any output conditions/description min typ max 130 150 units % % SAFETY & COMPLIANCE parameter isolation voltage safety approvals EMI/EMC conditions/description primary to secondary (for 1 second): primary to earth ground (for 1 second): min 5,656 5,656 typ max units Vdc Vdc UL 60950-1/60601-1, NEMKO EN60950-1/EN60601-1, CE EN55022:1998 (CISPR 22 class A conducted), EN61000-3-2: 2000, EN61000-3-3: A1:2001, EN55024 (IEC61000-4-2: 1995, IEC61000-4-3: 1995, IEC61000-4-4: 1995, IEC61000-4-5: 1995, IEC61000-4-6: 1996, IEC61000-4-11: 1994) measured per IEC 60950-1, paragraph 5.1, test voltage of 120 Vac/60 Hz yes with 400 LFM forced air, MIL-HDBK-217E-1, 75% of rated full load, 25°C ambient 200,000 hrs 0.275 mA leakage current RoHS compliant MTBF cui.com CUI Inc │ SERIES: VMS-160 │ DESCRIPTION: AC-DC POWER SUPPLY date 07/27/2011 │ page 3 of 5 ENVIRONMENTAL parameter operating temperature storage temperature operating humidity storage humidity shock vibration conditions/description see derating curve see derating curve non-condensing non-condensing min -20 -40 8 10 140 1 2 typ max 50 80 90 95 units °C °C % % G G Grms Grms operating (11 ms, half sine, for a total of 6 shock inputs) non-operating (2 ms, half sine, for a total of 6 shock inputs) operating (10 ~ 300 Hz, 1 hour per axis, 3 hours total) non-operating (10 ~ 500 Hz, 1 hour per axis, 3 hours total) DERATING CURVES output power vs. ambient temperature 100 2 1 1 2 Convection Forced air (400 LFM) Load (%) 80 60 40 20 -20 0 10 20 30 40 50 60 70 Ambient Temperature (°C) 100 2 1 1 2 Convection Forced air (400 LFM) Load (%) 80 60 40 20 -20 0 10 20 30 40 50 60 70 Ambient Temperature (°C) 100 2 1 1 2 Convection Forced air (400 LFM) Load (%) 80 60 40 20 -20 0 10 20 30 40 50 60 70 Ambient Temperature (°C) cui.com CUI Inc │ SERIES: VMS-160 │ DESCRIPTION: AC-DC POWER SUPPLY date 07/27/2011 │ page 4 of 5 MECHANICAL DRAWING CN3 1 2 3 4 101.6 4.000 95.3 3.752 MAX DIA OF MOUNTING HARDWARE Ø6.35 (Ø0.250) TYP 4 PLCS 1 4 8 50.8 2.000 1 2 3 4 5 6 7 8 GND GND 12V (FAN) 12V (FAN) MOLEX (22-23-2021) 4 PIN 0.10 SPACING Ø4.04 (Ø0.159) MOUNTING HOLE TYP 4 PLCS CN2 dc dc dc dc return return return return V1 V1 V1 V1 CN1 1 2 ac neutral ac line 1 2 1 MOLEX (26-60-4030) 3 PIN, CTR PIN REMOVED 0.156 SPACING 44.5 1.752 QUICK DISCONNECT TAB 6.35 (0.250) X 0.81 (0.032) MOLEX (19705-4301) MOLEX (26-60-4080) 8 PIN 0.156 SPACING 21.59 0.850 27.5 1.082 4.4 0.173 MAX SMT COMPONENT HEIGHT cui.com CUI Inc │ SERIES: VMS-160 │ DESCRIPTION: AC-DC POWER SUPPLY date 07/27/2011 │ page 5 of 5 REVISION HISTORY rev. 1.0 1.01 description initial release applied new spec template date 05/5/2009 06/16/2011 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. Fax 503.612.2383 cui.com techsupport@cui.com CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.