VMS-200-48

Additional Resources: Product Page | 3D Model date 05/06/2021 page 1 of 10 SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • compact 2 x 4” high power-density design (CNF version is 2.4 x 4.6”) universal input range efficiencies up to 93.5% 4th edition medical safeties fan output (+12 Vdc) over voltage, over current, over temperature and short circuit protections covered and open-frame configurations TUVRheinland MODEL EN 60601-1 IEC 60601-1 www.tuv.com ID xxxxxxxxxx output voltage output current output power1 ripple and noise2 efficiency3 (Vdc) max (A) max (W) max (mVp-p) typ (%) VMS-200-12 12 16.67 200 150 92 VMS-200-24 24 8.33 200 240 93.5 VMS-200-48 48 4.17 200 480 93 Notes: 1. 2. 3. 4. Maximum output power of 200 W with 10 CFM forced air or baseplate cooling, 180 W at 220 Vac with convection cooling. At full load, nominal input, 20 MHz bandwidth oscilloscope, output terminated with 47 μF aluminum electrolytic and 0.1 μF ceramic capacitors. At full load, 25°C, 230 Vac input. All specifications are measured at Ta=25°C, nominal input voltage, and 75% rated output load unless otherwise specified. PART NUMBER KEY VMS-200 - XX - XXX Base Number Output Voltage cui.com Chassis: “blank” = open-frame CNF = covered Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 2 of 10 INPUT parameter max units voltage conditions/description min 90 typ 264 Vac frequency 47 60 Hz under voltage shutdown 69 83 Vac current at 100 Vac, full load 2.5 A inrush current at 240 Vac, 25°C, cold start 100 A leakage current at 264 Vac 0.3 mA 0.1 mA 0.3 W max units 16,400 8,570 1,270 μF μF μF leakage current (enclosure/ patient) power factor correction meets EN 61000-3-2 no load power consumption OUTPUT parameter conditions/description min output capacitance at 115/230 Vac, full load 12 Vdc output models 24 Vdc output models 48 Vdc output models initial set point accuracy at 60% load, 25°C line regulation high line to low line at full load load regulation at 60%±40% load hold-up time at 115 Vac 10 ms 85 kHz ±0.05 %/°C switching frequency temperature coefficient fan output open-frame: 12 Vdc / 300 mA covered: 12 Vdc / 500 mA LED indicates when power is on typ ±2 % ±0.5 % ±1 % PROTECTIONS parameter conditions/description over voltage protection recycle ac input to restart 12 Vdc output models 24 Vdc ouput models 48 Vdc output models over current protection hiccup, auto recovery short circuit protection hiccup, auto recovery min typ max 16 31 56 130 150 min typ units Vdc Vdc Vdc 180 % max units 4,000 1,500 1,500 Vac Vac Vac SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output for 1 minute input to earth ground for 1 minute output to earth ground for 1 minute isolation resistance 100 safety approvals UL/cUL 60601-1 (3.1 edition), IEC 60601-1 (3.1 edition), EN 60601-1 (3.1 edition) safety class Class I & II EMI/EMC EN 60601-1-2 (4th edition) conducted disturbance EN 55011, FCC CFR 47 Part 18, Class B radiated disturbance1 EN 55011, FCC CFR 47 Part 18, Class B harmonic current emissions IEC 61000-3-2:2014, Class A, Class D Notes: 1. Need an external 1 mH choke at input for Class II type to pass EN 55011 Class B. cui.com MΩ Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 3 of 10 SAFETY & COMPLIANCE (CONTINUED) parameter conditions/description voltage fluctuations & flicker IEC 61000-3-3:2013, Criteria A min typ max radio-frequency, continuous radiated disturbance IEC 61000-4-3:2010, Criteria A electrical fast transient (EFT) IEC 61000-4-4:2012, ±0.5 kV, ±1 kV, ±2 kV, Criteria A surge IEC 61000-4-5:2014, L-N: ±0.5 kV, ±1 kV, L-PE, N-PE: ±0.5 kV, ±1 kV, ±2 kV, Criteria A conducted disturbances, induced by RF fields IEC 61000-4-6:2013, Criteria A power frequency magnetic field IEC 61000-4-8:2009, Criteria A voltage dips IEC 61000-4-11:2004, dip: 30% 500 ms, dip: 60% 100 ms, dip >95% 10 ms, Criteria A voltage interruptions IEC 61000-4-11:2004, >95% 5,000 ms, Criteria B MTBF as per MIL-HDBK-217F, at full load, 25°C RoHS 2011/65/EU 279,000 units hours ENVIRONMENTAL parameter conditions/description min max units operating temperature see derating curves -20 80 °C -40 85 °C storage temperature typ operating humidity non-condensing 93 % storage humidity non-condensing 93 % DERATING CURVES cui.com Additional Resources: Product Page CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY | 3D Model date 05/06/2021 │ page 4 of 10 DERATING CURVES (CONTINUED) EFFICIENCY CURVES cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 5 of 10 MECHANICAL parameter conditions/description dimensions VMS-200 models: 4.000 x 2.000 x 1.480 (101.60 x 50.80 x 37.60 mm) VMS-200-CNF models: 4.606 x 2.441 x 1.575 (117.00 x 62.00 x 40.00 mm) min typ max weight VMS-200 models VMS-200-CNF models cooling external fan or baseplate cooling CN1 input connector CN1 mates with JST housing VHR series, JST SVH-21/41T-P1.1 series crimp terminal or equivalent output terminals +Vo & -Vo terminals are M3 screws fan connector fan mates with JST housing PHR-R5500 series, JST R5503-PT series crimp terminal or equivalent 253 314 MECHANICAL DRAWING Open-frame units: inch [mm] tolerance: ±0.020 [±0.50] 4.000 101.60 CN1 3 ACN 0.150 3.80 PE PE FAN 1 FAN V+ 2 FAN V- +Vo ACN -Vo ACL 4- 1 0. 3 2 3. 0 PE Air flow direction 10CFM GBO FAN V+ FAN VLED 0.197 5.00 max Function 10mm PIN 2.000 50.80 - 1.701 43.20 ACL 2 0.150 3.80 1 3.701 94.00 cui.com 1.480 37.60 Function 1.220 31.00 max PIN units inch inch g g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 6 of 10 MECHANICAL DRAWING (CONTINUED) Covered units: inch [mm] tolerance: ±0.020 [±0.50] 1 ACL 2 - 3 ACN +Vo ACN FAN V+ 2 FAN V- Air flow direction GBO 10CFM 0.236 6.00 0.197 5.00 Function 1 0.370 9.40 PIN -Vo ACL 10mm FAN 0.157 4.00 4.29 109.00 cui.com 1.575 40.00 Function 1.701 43.20 PIN 2.441 62.00 4.606 117.00 CN1 FAN V+ FAN VLED Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 7 of 10 EMI RECOMMENDATION To Meet EN 55011 Class B, Class II VMS-200 VMS-200-CNF Table 1 Specification Inductance Duplex Winding/ Turns Manufacturers T16*10*5C R12 1 mH TEX-E Ø0.65/11T VAKOS cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 8 of 10 INSTALLATION INSRUCTIONS The VMS-200 series has (4) 3.2 mm diameter mounting holes that can be used in (4) types of installations. Type 1 Mounting from top with spacers (VMS-200 models) Type 2 Mounting from bottom (VMS-200-CNF models) Spacer: 5.5 mm diameter max, 5 mm high minimum Screw Size: (4) M3X0.5 (head & washer OD not to exceed 6 mm) Mounting torque: 3 kgf-cm Screw Size: (4) M3X0.5 Mounting torque: 3 kgf-cm Type 3 (External Baseplate Cooling) Mounting from top with spacers (VMS-200 models) Type 4 (External Baseplate Cooling) Mounting from bottom (VMS-200-CNF models) Heat Sink: 280 x 100 x 10 mm Spacer: 5.5 mm diameter max, 5 mm high minimum Screw Size: (4) M3X0.5 (head & washer OD not to exceed 6 mm) Mounting torque: 3 kgf-cm Heat Sink: 280 x 100 x 10 mm Screw Size: (4) M3X0.5 Mounting torque: 3 kgf-cm cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 9 of 10 INSTALLATION INSRUCTIONS (CONTINUED) Output Terminals Mate with round or Y terminals Terminal Size: (2) M3 Torque: 3 kgf-cm Output Connectors with M3 Screws*2 3(kgf-cm) or Mounting Clearance Allow at least 4 mm side clearance and 5 mm height clearance. If clearances aren’t met, the isolation and withstand specifications may not be met. Protective Earth PE should be connected to the earth (ground) terminal of the apparatus otherwise conducted noise and output noise will increase. cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-200 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/06/2021 │ page 10 of 10 REVISION HISTORY rev. description date 1.0 initial release 12/12/2017 1.01 company logo updated 12/21/2020 1.02 derating and efficiency curves updated 05/06/2021 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.