VMS-80-15

Additional Resources: Product Page date 08/28/2012 page 1 of 4 SERIES: VMS-80 │ DESCRIPTION: AC-DC POWER SUPPLY ® MODEL VMS-80-5 output voltage output current output power ripple and noise1 efficiency (Vdc) max (A) max (W) max (mVp-p) typ (%) 14.0 70 50 85 8.89 80 90 85 6.66 80 120 85 5.33 80 150 85 4.44 80 180 85 24 3.33 80 240 85 30 2.66 80 300 85 36 2.22 80 360 85 5 VMS-80-9 9 12 VMS-80-15 15 VMS-80-18 18 N VMS-80-12 VMS-80-24 VMS-80-30 VMS-80-36 1. Measured at 20MHz, with 0.1μF ceramic and 47μF electrolytic capacitors O Notes: IEC 60601-1 EN 60601-1 N RoHS U up to 80 W continuous power universal input (90~260 Vac) single output from 5~36 V no minimum load required over voltage, over current and short circuit protections full medical safety approvals efficiency up to 85% TI • • • • • • • ED FEATURES VMS-80 - XX Base Number Output Voltage D IS C PART NUMBER KEY cui.com Additional Resources: Product Page CUI Inc │ SERIES: VMS-80 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 page 2 of 4 INPUT parameter conditions/description min voltage typ 90 47 input current at 100 Vac, full load at 240 Vac, full load inrush current at 115 Vac, full load, cool start at 25 °C at 230 Vac, full load, cool start at 25 °C OUTPUT full load load regulation at 230 Vac hold-up time at 110 Vac, full load PROTECTIONS parameter conditions/description over voltage protection recovers automatically recovers automatically short circuit protection recovers automatically SAFETY & COMPLIANCE 63 Hz A 15 30 18 34 A typ max units ±0.5 ±1 % ±3 ±7 % 16 min conditions/description isolation voltage input to output (for 60 seconds, 10mA) input to ground (for 60 seconds, 10mA) max units 132 % 110 150 % max units min insulation resistance at 500 Vdc N parameter typ ms 112 TI over current protection min Vac 1.2 0.4 U conditions/description line regulation N parameter units 260 ED frequency max typ 5,656 2,828 Vdc 50 MΩ IEC 60601-1, EN 60601-1, UL 60601-1 EMI/EMC EN 55011 Class B, CISPR 11 Class B, FCC Part 18 Class B, EN 61000-3-2, EN 61000-3-3, IEC 61000-4(2, 3, 4, 5, 6, 8, 11) leakage current RoHS compliant 0.1 mA yes MIL-HDBK-217F, at 25C, nominal load IS C MTBF O safety approvals 100,000 hours ENVIRONMENTAL parameter conditions/description operating temperature derating from 50~70°C min typ max units 0 70 °C -40 85 °C operating humidity 95 % storage humidity 75 % D storage temperature cui.com Additional Resources: Product Page CUI Inc │ SERIES: VMS-80 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 page 3 of 4 DERATING CURVES output power vs. ambient temperature ED Load (%) 100 80 60 (Natural Convection) 40 20 0 10 20 30 40 50 60 70 MECHANICAL DRAWING units: mm[in] TOLERANCE: mm: ±0.5 inch: ±0.02 MOUNTING HOLES 4.00 0.16 (4 PLCS) N 127.00 5.00 U Ambient Temperature (°C) 115.60 4.55 CN1 MATES WITH MOLEX HOUSING 09-50-3031 AND MOLEX 2478 SERIES CRIMP TERMINAL L 2 No pin 3 AC Neutral N N AC Line 17.00 0.67 AC INPUT 65.15 2.56 3.96 0.16 (11 PLCS) 4.60 0.18 MAX D cui.com 76.50 3.01 12 DC OUTPUT 27.90 1.10 MAX IS C 1 7.92 0.31 O CN1 TI 1 CN2 17.05 0.67 CN2 MATES WITH MOLEX HOUSING 09-50-3121 AND MOLEX 2478 SERIES CRIMP TERMINAL 1 -Vo 2 -Vo 3 -Vo 4 -Vo 5 -Vo 6 -Vo 7 +Vo 8 +Vo 9 +Vo 10 +Vo 11 +Vo 12 +Vo Additional Resources: Product Page CUI Inc │ SERIES: VMS-80 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 page 4 of 4 REVISION HISTORY description date 09/21/2011 1.0 initial release 1.01 V-Infinity branding removed 1.02 safety marks updated ED rev. 07/06/2012 08/28/2012 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.