FS22A

FS Series Flow Switches Flow detection switches 15mm and 22mm tube versions Low flow version available in 15mm tube Maximum Operating Pressure 10 bar WRAS approved for use in cold and hot water up to 85ºC Temperature rated to 85ºC Technical Specification Material Colour Temp. Range °C °F Must operate flow rate* Must release flow rate # These flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The switches are designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. Acetal Resin Black -20 / +85 -4 ./ +185 FS15A litres/min 2.0 US Gal/min 0.53 litres/min 0.3 US Gal/min 0.08 25cm PVC insulated Cable Electrical Specification Contact Form Switching Power Max VA Switching Voltage AC Max V Switching Voltage DC Max V Switching Current Max A All ratings are for resistive load only. Standard Parts FS15A FS15LF FS22A FS15LF 0.90 0.24 0.25 0.07 FS22A 3.75 0.99 1.40 0.37 N/O with no flow 25 240 120 0.6 Must operate l/min 2.0 0.90 3.75 Must release l/min 0.3 0.25 1.40 Approvals WRAS WRAS WRAS * The switch will have operated (contacts close) when the flow rate rises above this value. # The switch will have released (contacts open) when the flow rate falls below this value. NB Operate and release flow rates only apply when the switch is mounted with the flow direction vertical. The sensitivity of the switch is reduced when mounted with the flow direction horizontal. Installation Flow switches can be mounted with the flow direction horizontal or vertical (upward flow). The cap with cable connection must always be upwards, as the piston is returned to its released position by gravity. Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. Mechanical Dimensions All%NVIRONMENTAL dimensions are in millimeters (inches) FS22 FS15 0ART.UMBERING3YSTEM 15mm (0.59") Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 22mm (0.87") 114mm (4.48") 107mm (4.21”) 56mm 58mm (2.20") (2.28") Email:sales@cynergy3.com ISO9001 C E R T I F I E D www.cynergy3.com © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.