RSF33W100RC

RSF30 Series 100VA Internal fitting switch 100VA contacts Rugged design WRAS approved versions Many variants are UL recognised components File No. E171218 Technical Specification Material Colour Temp. Range °C °F Min. Fluid SG Must close level (SG=1) Must open level (SG=1) RSF33 Nylon RSF34 Polypropylene WRAS approved Black Opaque -20 / +75 -20 / +100 -4 ./ +167 -4 / +212 0.85 0.85 20mm 23mm 47mm 52mm Electrical Specification Contact Form Switching Power Max VA Switching Voltage AC Max V Switching Voltage DC Max V Switching Current Max A All ratings are for resistive load only. The RSF30 is a higher power side entry, internally fitted switch. These may be used for directly switching some small loads of less than 100VA. Fitting of this type requires access to the inside of the tank. Standard Parts RSF33W100RC RSF34W100RF 100W N/O (N/C) 100 300 300 3 Material Max Power Nylon 100VA Polypropylene 100VA Leadouts 100cm PVC 16/0.2 100cm PVC 16/0.2 Gasket Nitrile Nitrile Approvals WRAS Available in Nylon or Polypropylene. The switch action may be reversed by rotating the device through 180º. Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. Mechanical Dimensions 94mm (3.7") 22mm (0.9") RSF33 6mm (0.2") max. tank wall RSF34 8mm (0.3") max. tank wall 15.25mm crs (0.6") Must close Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 12.7mm (0.5") dia. (RSF33) 16.5mm (0.65") dia. (RSF34) Hole in Tank level Switch closed Must open 85mm max. 50° max. (3.3") M16x2 Thread (RSF34) M12x1.75 Thread (RSF33) Gasket Seal level Nylon Nut Email:sales@cynergy3.com Switch open ISO9001 C E R T I F I E D www.cynergy3.com © 2013 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.