CY22392FXA

Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com CY22392 Automotive Three-PLL General Purpose Flash Programmable Clock Generator CY22392 Automotive, Three-PLL General Purpose Flash Programmable Clock Generator Features ■ Three Integrated Phase-locked Loops ■ Ultra Wide Divide Counters (8-bit Q, 11-bit P, and 7-bit Post Divide) ■ Improved Linear Crystal Load Capacitors ■ Flash Programmability ■ Field Programmable ■ Low-jitter, High-accuracy Outputs ■ Power Management Options (Shutdown, OE, Suspend) ■ Configurable Crystal Drive Strength ■ Frequency Select through three External LVTTL Inputs ■ 3.3 V Operation ■ Automotive A temperature range ■ AEC-Q100 Qualified ■ 16-pin TSSOP Package ■ CyClocksRT™ Support Benefits ■ Generates up to three unique frequencies on six outputs up to 166 MHz from an external source. Functional upgrade for current CY2292 family. ■ Enables 0 ppm frequency generation and frequency conversion under the most demanding applications. ■ Improves frequency accuracy over temperature, age, process, and initial offset. ■ Nonvolatile programming enables easy customization, fast turnaround, performance tweaking, design timing margin testing, inventory control, lower part count, and more secure product supply. In addition, any part in the family can also be programmed multiple times, which reduces programming errors and provides an easy upgrade path for existing designs. ■ In-house programming of samples and prototype quantities is available using the CY3672 development kit. ■ Performance suitable for high-end multimedia, communications, industrial, A/D Converters, and consumer applications. ■ Supports numerous low power application schemes and reduces EMI by enabling unused outputs to be turned off. ■ Adjusts crystal drive strength for compatibility with virtually all crystals. ■ 3-bit external frequency select options for PLL1, CLKA, and CLKB. ■ Industry-standard supply voltage. ■ Industry-standard packaging saves on board space. ■ Easy to use software support for design entry. Functional Description For a complete list of related resources, click here. Logic Block Diagram XTALIN XTALOUT XBUF OSC. CONFIGURATION FLASH PLL1 11 BIT P 8 BIT Q SHUTDOWN/OE PLL2 S0 11 BIT P 8 BIT Q S1 S2/SUSPEND 4x4 Crosspoint Switch PLL3 11 BIT P 8 BIT Q Cypress Semiconductor Corporation Document Number: 001-88434 Rev. *D • 198 Champion Court • Divider /2,3, or 4 CLKE Divider 7 BIT CLKD Divider 7 BIT CLKC Divider 7 BIT CLKB Divider 7 BIT CLKA San Jose, CA 95134-1709 • 408-943-2600 Revised April 24, 2020 CY22392 Automotive Contents Pin Configurations ........................................................... 3 Pin Definitions .................................................................. 3 Operation ........................................................................... 4 Configurable PLLs ....................................................... 4 General Purpose Inputs .............................................. 4 Crystal Input ................................................................ 4 Output Configuration ................................................... 4 Power Saving Features ............................................... 4 Improving Jitter ............................................................ 5 Power Supply Sequencing .......................................... 5 CyberClocks™ Software .................................................. 5 Device Programming ........................................................ 5 Junction Temperature Limitations .................................. 5 Maximum Ratings ............................................................. 6 Operating Conditions ....................................................... 6 Electrical Characteristics ................................................. 6 Switching Characteristics ................................................ 7 Document Number: 001-88434 Rev. *D Switching Waveforms ...................................................... 8 Test Circuit ........................................................................ 8 Ordering Information ........................................................ 9 Possible Configurations ............................................... 9 Ordering Code Definitions ........................................... 9 Package Diagrams .......................................................... 10 Acronyms ........................................................................ 11 Document Conventions ................................................. 11 Units of Measure ....................................................... 11 Document History Page ................................................. 12 Sales, Solutions, and Legal Information ...................... 13 Worldwide Sales and Design Support ....................... 13 Products .................................................................... 13 PSoC® Solutions ....................................................... 13 Cypress Developer Community ................................. 13 Technical Support ..................................................... 13 Page 2 of 13 CY22392 Automotive Pin Configurations Figure 1. 16-pin TSSOP pinout SHUTDOWN/OE CLKC 1 16 VDD 2 15 S2/SUSPEND AGND 3 14 AVDD XTALIN 4 13 S1 XTALOUT XBUF 5 12 6 11 S0 GND CLKD 7 10 CLKA CLKE 8 9 CLKB Pin Definitions Name Pin Number CLKC 1 Configurable clock output C Description VDD 2 Power supply AGND 3 Analog Ground XTALIN 4 Reference crystal input or external reference clock input XTALOUT 5 Reference crystal feedback XBUF 6 Buffered reference clock output CLKD 7 Configurable clock output D CLKE 8 Configurable clock output E CLKB 9 Configurable clock output B CLKA 10 Configurable clock output A GND 11 Ground S0 12 General Purpose Input for Frequency Control; bit 0 S1 13 General Purpose Input for Frequency Control; bit 1 AVDD 14 Analog Power Supply S2/SUSPEND 15 General Purpose Input for Frequency Control; bit 2. Optionally Suspend mode control input. SHUTDOWN/OE 16 Places outputs in three-state condition and shuts down chip when Low. Optionally, only places outputs in tristate condition and does not shut down chip when Low. Document Number: 001-88434 Rev. *D Page 3 of 13 CY22392 Automotive Operation applications that requirements. The CY22392 is an upgrade to the existing CY2292. The new device has a wider frequency range, greater flexibility, improved performance, and incorporates many features that reduce PLL sensitivity to external system issues. The value of the load capacitors is determined by six bits in a programmable register. The load capacitance can be set with a resolution of 0.375 pF for a total crystal load range of 6 pF to 30 pF. The device has three PLLs which, when combined with the reference, enable up to four independent frequencies to be output on up to six pins. These three PLLs are completely programmable. For driven clock inputs the input load capacitors may be completely bypassed. This enables the clock chip to accept driven frequency inputs up to 166 MHz. If the application requires a driven input, then XTALOUT must be left floating. Configurable PLLs PLL1 generates a frequency that is equal to the reference divided by an 8-bit divider (Q) and multiplied by an 11-bit divider in the PLL feedback loop (P). The output of PLL1 is sent to the crosspoint switch. The output of PLL1 is also sent to a /2, /3, or /4 synchronous post-divider that is output through CLKE. The frequency of PLL1 can be changed by external CMOS inputs, S0, S1, S2. See the following section on General Purpose Inputs for more details. PLL2 generates a frequency that is equal to the reference divided by an 8-bit divider (Q) and multiplied by an 11-bit divider in the PLL feedback loop (P). The output of PLL2 is sent to the crosspoint switch. PLL3 generates a frequency that is equal to the reference divided by an 8-bit divider (Q) and multiplied by an 11-bit divider in the PLL feedback loop (P). The output of PLL3 is sent to the cross-point switch. General Purpose Inputs S0, S1, and S2 are general purpose inputs that can be programmed to enable eight different frequency settings. Options that may be switched with these general purpose inputs are as follows: the frequency of PLL1, the output divider of CLKB, and the output divider of CLKA. CLKA and CLKB both have 7-bit dividers that point to one of two programmable settings (register 0 and register 1). Both clocks share a single register control, so both must be set to register 0, or both must be set to register 1. For example, the part may be programmed to use S0, S1, and S2 (0, 0, 0 to 1, 1, 1) to control eight different values of P and Q on PLL1. For each PLL1 P and Q setting, one of the two CLKA and CLKB divider registers can be chosen. Any divider change as a result of switching S0, S1, or S2 is guaranteed to be glitch free. Crystal Input The input crystal oscillator is an important feature of this device because of its flexibility and performance features. The oscillator inverter has programmable drive strength. This enables maximum compatibility with crystals from various manufacturers, processes, performances, and qualities. The input load capacitors are placed on-die to reduce external component cost. These capacitors are true parallel-plate capacitors for ultra-linear performance. These were chosen to reduce the frequency shift that occurs when non-linear load capacitance interacts with load, bias, supply, and temperature changes. Non-linear (FET gate) crystal load capacitors must not be used for MPEG, POTS dial tone, communications, or other Document Number: 001-88434 Rev. *D are sensitive to absolute frequency Output Configuration Under normal operation there are four internal frequency sources that may be routed through a programmable crosspoint switch to any of the four programmable 7-bit output dividers. The four sources are: reference, PLL1, PLL2, and PLL3. In addition, many outputs have a unique capability for even greater flexibility. The following is a description of each output. CLKA’s output originates from the crosspoint switch and goes through a programmable 7-bit post divider. The 7-bit post divider derives its value from one of two programmable registers. Each of the eight possible combinations of S0, S1, S2 controls which of the two programmable registers is loaded into CLKA’s 7-bit post divider. See the section General Purpose Inputs for more information. CLKB’s output originates from the crosspoint switch and goes through a programmable 7-bit post divider. The 7-bit post divider derives its value from one of two programmable registers. Each of the eight possible combinations of S0, S1, and S2 controls which of the two programmable registers is loaded into CLKA’s 7-bit post divider. See the section General Purpose Inputs for more information. CLKC’s output originates from the crosspoint switch and goes through a programmable 7-bit post divider. The 7-bit post divider derives its value from one programmable register. CLKD’s output originates from the crosspoint switch and goes through a programmable 7-bit post divider. The 7-bit post divider derives its value from one programmable register. CLKE’s output originates from PLL1 and goes through a post divider that may be programmed to /2, /3, or /4. XBUF is simply the buffered reference. The clock outputs have been designed to drive a single point load with a total lumped load capacitance of 15 pF. While driving multiple loads is possible with proper termination, it is generally not recommended. Power Saving Features The SHUTDOWN/OE input tristates the outputs when pulled low. If system shutdown is enabled, a Low on this pin also shuts off the PLLs, counters, the reference oscillator, and all other active components. The resulting current on the VDD pins is less than 5 μA (typical). After leaving shutdown mode, the PLLs must relock. The S2/SUSPEND input can be configured to shut down a customizable set of outputs and/or PLLs, when LOW. All PLLs and any of the outputs can be shut off in nearly any combination. The only limitation is that if a PLL is shut off, all outputs derived from it must also be shut off. Suspending a PLL shuts off all Page 4 of 13 CY22392 Automotive associated logic, while suspending an output simply forces a tristate condition. Improving Jitter Jitter Optimization Control is useful in mitigating problems related to similar clocks switching at the same moment, causing excess jitter. If one PLL is driving more than one output, the negative phase of the PLL can be selected for one of the outputs (CLKA–CLKD). This prevents the output edges from aligning, enabling superior jitter performance. Power Supply Sequencing For parts with multiple VDD pins, there are no power supply sequencing requirements. The part is not fully operational until all VDD pins have been brought up to the voltages specified in the Operating Conditions. All grounds must be connected to the same ground plane. CyberClocks™ Software The CyberClocks application enables users to configure this device. Within CyberClocks, select the CyClocksRT tool. The easy-to-use interface offers complete control of the many features of this family including input frequency, PLL, output frequencies, and different functional options. Data sheet frequency range limitations are checked and performance tuning is automatically applied. CyClocksRT also has a power estimation feature that enables you to see the power consumption of your specific configuration. Download a copy of CyberClocks free on Cypress’s web site at www.cypress.com. Install and run it on any PC running Windows. Device Programming Part numbers starting with CY22392F are ‘field programmable’ devices. Field programmable devices are shipped unprogrammed, and must be programmed prior to installation on a PCB. After a programming file (.jed) is created using CyberClocks software, devices can be programmed in small quantities using the CY3672 programmer and CY3698 [1] adapter. Programming of the clock device should be done at temperatures < 75 °C. Volume programming is available through Cypress Semiconductor’s value added distribution partners or by using third party programmers from BP Microsystems, HiLo Systems, and others. For sufficiently large volumes, Cypress can supply pre-programmed devices with a part number extension that is configuration-specific. Junction Temperature Limitations It is possible to program the CY22392 such that the maximum junction temperature rating is exceeded. The package θJA is 115 °C/W. Use the CyClocksRT power estimation feature to verify that the programmed configuration meets the junction temperature and package power dissipation maximum ratings. Note 1. Programming of only 16-pin TSSOP package is supported by CY3698. Document Number: 001-88434 Rev. *D Page 5 of 13 CY22392 Automotive Maximum Ratings Maximum Programming Cycles .......................................100 Exceeding maximum ratings may shorten the useful life of the device. User guidelines are not tested. Supply Voltage .............................................–0.5 V to +7.0 V DC Input Voltage ........................ –0.5 V to + (AVDD + 0.5 V) Package Power Dissipation (A-Grade) .................... 350 mW Static Discharge Voltage (per MIL-STD-883, Method 3015) ............................. 2000 V Latch up (according to JEDEC 17) ..................... > ±200 mA Stresses exceeding absolute maximum conditions may cause permanent damage to the device. These conditions are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated in the operation sections of this data sheet is not implied. Extended exposure to Absolute Maximum Conditions may affect reliability. Storage Temperature ............................... –65 °C to +125 °C Junction Temperature A Grade ..................................................................... 125 °C Data Retention at Tj = 125 °C ...............................> 10 years Data Retention at Tj = 150 °C .................................> 2 years Operating Conditions The following table lists the recommended operating conditions. [2] Parameter Description VDD/AVDD Supply Voltage TA Automotive A-Grade Operating Temperature, Ambient fREF External Reference Crystal External Reference Clock [3], Automotive A-Grade tPU Min Typ Max Unit 3.135 3.3 3.465 V –40 – +85 °C 8 – 30 MHz 1 – 166 MHz 0.05 – 500 ms Conditions Min Typ Max Unit VOH = VDD – 0.5 V, VDD = 3.3 V [5] 12 24 – mA Power up time for all VDD's to reach minimum specified voltage (power ramps must be monotonic) Electrical Characteristics Parameter Description IOH Output High Current [4] IOL Output Low Current [4] 12 24 – mA CXTAL_MIN Crystal Load Capacitance [4] Capload at minimum setting – 6 – pF CXTAL_MAX Crystal Load Capacitance [4] Capload at maximum setting – 30 – pF VOL = 0.5 V, VDD = 3.3 V [4] [5] CLOAD_IN Input Pin Capacitance – 7 – pF VIH High Level Input Voltage CMOS levels,% of AVDD Except crystal pins 70% – – AVDD VIL Low Level Input Voltage CMOS levels,% of AVDD – – 30% AVDD IIH Input High Current VIN = AVDD – 0.3 V – 100 MHz or divider = 1, measured at VDD/2 40% 50% 60% t3 Rising Edge Slew Rate [7] Output clock rise time, 20% to 80% of VDD 0.75 1.4 – V/ns t4 Falling Edge Slew Rate [7] Output clock fall time, 80% to 20% of VDD 0.75 1.4 – V/ns t5 Output three-state Timing [7] Time for output to enter or leave three-state mode after SHUTDOWN/OE switches – 150 300 ns t6 Clock Jitter [7, 10] Peak-to-peak period jitter, CLK outputs measured at VDD/2 – 400 – ps t7 Lock Time [7] PLL Lock Time from Power up – 1.0 3 ms Notes 7. Guaranteed by design, not 100% tested. 8. Guaranteed to meet 20%–80% output thresholds and duty cycle specifications. 9. Reference Output duty cycle depends on XTALIN duty cycle. 10. Jitter varies significantly with configuration. Reference Output jitter depends on XTALIN jitter and edge rate. Document Number: 001-88434 Rev. *D Page 7 of 13 CY22392 Automotive Switching Waveforms Figure 2. All Outputs, Duty Cycle, and Rise/Fall Time t1 t2 OUTPUT t3 t4 Figure 3. Output Three-State Timing OE t5 t5 ALL THREE-STATE OUTPUTS Figure 4. CLK Output Jitter t6 CLK OUTPUT Figure 5. Frequency Change . SELECT OLD SELECT Fold NEW SELECT STABLE t7 Fnew OUTPUT Test Circuit AVDD 0.1 μF OUTPUTS CLK out CLOAD VDD 0.1 μF GND Document Number: 001-88434 Rev. *D Page 8 of 13 CY22392 Automotive Ordering Information Ordering Code Package Name Package Type Operating Range Pb-free CY22392FXA ZZ16 16-pin TSSOP Automotive-A Grade (TA = –40 °C to 85 °C) CY22392FXAT ZZ16 16-pin TSSOP – Tape and Reel Automotive-A Grade (TA = –40 °C to 85 °C) Some product offerings are factory programmed, customer specific devices with customized part numbers. The Possible Configurations table shows the available device types, but not complete part numbers. Contact your local Cypress FAE or Sales Representative for more information. Possible Configurations Ordering Code Package Name Package Type Operating Range Pb-free CY22392ZXA-xxx [11] CY22392ZXA-xxxT [11] ZZ16 16-pin TSSOP Automotive-A Grade (TA = –40 °C to 85 °C) ZZ16 16-pin TSSOP – Tape and Reel Automotive-A Grade (TA = –40 °C to 85 °C) Ordering Code Definitions CY 22392 F X X X - xxx T T = Tape and Reel; blank = Tube Dash Code (for factory programmed devices only) Temperature Range: X = A or E A = Automotive-A Grade = –40 °C to 85 °C Pb-free Package Type: X = blank blank = 16-pin TSSOP F = field programmable device Base part number Company ID: CY = Cypress Notes 11. The CY22392ZX are factory programmed configurations. Factory programming is available for high-volume design opportunities of 100 Ku/year or more in production. For more details, contact your local Cypress FAE or Cypress Sales Representative. Document Number: 001-88434 Rev. *D Page 9 of 13 CY22392 Automotive Package Diagrams Figure 6. 16-pin TSSOP 4.40 mm Body Z16.173/ZZ16.173 Package Outline, 51-85091 51-85091 *E Document Number: 001-88434 Rev. *D Page 10 of 13 CY22392 Automotive Acronyms Acronym Document Conventions Description Units of Measure CMOS Complementary Metal Oxide Semiconductor EMI Electromagnetic Interference °C degree Celsius FET Field-Effect Transistor MHz megahertz FTG Frequency Timing Generator μΑ microampere JEDEC Joint Electron Devices Engineering Council μF microfarad LVTTL Low Voltage Transistor-Transistor Logic mA milliampere OSC Oscillator mm millimeter PCB Printed Circuit Board ms millisecond PLL Phase Locked Loop mW milliwatt TSSOP Thin Shrink Small Outline Package ns nanosecond % percent pF picofarad ppm parts per million ps picosecond V volt W watt Document Number: 001-88434 Rev. *D Symbol Unit of Measure Page 11 of 13 CY22392 Automotive Document History Page Document Title: CY22392 Automotive, Three-PLL General Purpose Flash Programmable Clock Generator Document Number: 001-88434 REV. ECN Submission Date Description of Change ** 4062529 08/23/2013 New data sheet. *A 4322006 04/23/2014 Updated Features: Added Automotive-E grade temperature related information. Updated Device Programming: Added “Programming of the clock device should be done at temperatures < 75 °C.” Updated Maximum Ratings: Added “Data Retention at Tj = 150 °C” as “> 2 years”. Added “Package Power Dissipation (E-Grade)” as “217 mW”. Added “Stresses exceeding absolute maximum conditions may cause permanent damage to the device. These conditions are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated in the operation sections of this data sheet is not implied. Extended exposure to Absolute Maximum Conditions may affect reliability.” Updated Electrical Characteristics: Added Note 5 and referred the same note in Conditions of IOH and IOL parameters. Updated Conditions of IOZ parameter. Added Note “Profile configuration through CyberClocks (JEDEC file) should be so generated such that for E-Grade, IDDmax < 56 mA (considering TAmax = 125 °C).” referred the same note in Conditions of IDD parameter. Added Note 6 and referred the same note in Conditions of IDD parameter. Updated Ordering Information: Updated part numbers. *B 4528309 10/08/2014 Changed status from Preliminary to Final. Removed Automotive-E grade temperature related information in all instances across the document. Updated Electrical Characteristics: Removed Note “Profile configuration through CyberClocks (JEDEC file) should be so generated such that for E-Grade, IDDmax < 56 mA (considering TAmax = 125 °C).” and its reference in IDD parameter. Updated Ordering Information: Updated part numbers. Completing Sunset Review. *C 4724475 04/14/2015 Added Functional Description. Updated Package Diagrams: spec 51-85091 – Changed revision from *D to *E. Updated to new template. *D 6866984 04/24/2020 Updated to template. Removed Obsolete part numbers CY3672-USB and CY3698 in Ordering Information. Document Number: 001-88434 Rev. *D Page 12 of 13 CY22392 Automotive Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. PSoC® Solutions Products Arm® Cortex® Microcontrollers Automotive cypress.com/arm cypress.com/automotive Clocks & Buffers Interface cypress.com/clocks cypress.com/interface Internet of Things Memory cypress.com/iot cypress.com/memory Microcontrollers cypress.com/mcu PSoC cypress.com/psoc Power Management ICs Cypress Developer Community Community | Code Examples | Projects | Video | Blogs | Training | Components Technical Support cypress.com/support cypress.com/pmic Touch Sensing cypress.com/touch USB Controllers Wireless Connectivity PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP | PSoC 6 MCU cypress.com/usb cypress.com/wireless © Cypress Semiconductor Corporation, 2013-2020. This document is the property of Cypress Semiconductor Corporation and its subsidiaries ("Cypress"). This document, including any software or firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress hardware or software products, Cypress shall have no liability arising out of any security breach, such as unauthorized access to or use of a Cypress product. CYPRESS DOES NOT REPRESENT, WARRANT, OR GUARANTEE THAT CYPRESS PRODUCTS, OR SYSTEMS CREATED USING CYPRESS PRODUCTS, WILL BE FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (collectively, "Security Breach"). Cypress disclaims any liability relating to any Security Breach, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any Security Breach. In addition, the products described in these materials may contain design defects or errors known as errata which may cause the product to deviate from published specifications. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. "High-Risk Device" means any device or system whose failure could cause personal injury, death, or property damage. Examples of High-Risk Devices are weapons, nuclear installations, surgical implants, and other medical devices. "Critical Component" means any component of a High-Risk Device whose failure to perform can be reasonably expected to cause, directly or indirectly, the failure of the High-Risk Device, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any use of a Cypress product as a Critical Component in a High-Risk Device. You shall indemnify and hold Cypress, its directors, officers, employees, agents, affiliates, distributors, and assigns harmless from and against all claims, costs, damages, and expenses, arising out of any claim, including claims for product liability, personal injury or death, or property damage arising from any use of a Cypress product as a Critical Component in a High-Risk Device. Cypress products are not intended or authorized for use as a Critical Component in any High-Risk Device except to the limited extent that (i) Cypress's published data sheet for the product explicitly states Cypress has qualified the product for use in a specific High-Risk Device, or (ii) Cypress has given you advance written authorization to use the product as a Critical Component in the specific High-Risk Device and you have signed a separate indemnification agreement. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. Document Number: 001-88434 Rev. *D Revised April 24, 2020 Page 13 of 13 CyClocksRT is a trademark of Cypress Semiconductor Corporation. All products and company names mentioned in this document may be the trademarks of their respective holders.