CY2SSTV857

CY2SSTV857-32 Differential Clock Buffer/Driver DDR400/PC3200-Compliant Features • Operating frequency: 60 MHz to 230 MHz • Supports 400-MHz DDR SDRAM • 10 differential outputs from one differential input • Spread-Spectrum-compatible • Low jitter (cycle-to-cycle): < 75 • Very low skew: < 100 ps • Power management control input • High-impedance outputs when input clock < 20 MHz • 2.6V operation • Pin-compatible with CDC857-2 and -3 • 48-pin TSSOP and 40 QFN package • Industrial temperature of –40°C to 85°C • Conforms to JEDEC DDR specification Description The CY2SSTV857-32 is a high-performance, low-skew, low-jitter zero-delay buffer designed to distribute differential clocks in high-speed applications. The CY2SSTV857-32 generates ten differential pair clock outputs from one differential pair clock input. In addition, the CY2SSTV857-32 features differential feedback clock outpts and inputs. This allows the CY2SSTV857-32 to be used as a zero delay buffer. When used as a zero delay buffer in nested clock trees, the CY2SSTV857-32 locks onto the input reference and translates with near-zero delay to low-skew outputs. Block Diagram 3 2 Pin Configuration Y0 Y0# Y1 Y1# Y2 Y2# Y3 Y3# Y4 Y4# Y5 Y5# Y6 Y6# Y7 Y7# Y8 Y8# Y9 Y9# FBOUT FBOUT# VS S Y0 # Y0 VD D Q Y1 Y1 # VS S VS S Y2 # Y2 VD D Q VD D Q CLK C LK# VD D Q AVD D AVS S VS S Y3 # Y3 VD D Q Y4 32 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 VS S Y5 # Y5 VD D Q Y6 Y6 # VS S VS S Y7 # Y7 VD D Q PD# FB IN FB IN # VD D Q FB O U T # FB O U T VS S Y8 # Y8 VD D Q Y9 Y9 # VS S PD 37 AVDD 16 Test and Powerdown Logic 5 6 10 9 20 19 22 23 46 47 44 43 CY2SSTV857-32 CLK CLK# FBIN FBIN# 13 14 36 35 39 40 PLL 29 30 27 26 Y4 # VS S 48 TSSOP Package Cypress Semiconductor Corporation Document #: 38-07557 Rev. *E • 3901 North First Street • San Jose, CA 95134 • 408-943-2600 Revised January 12, 2005 CY2SSTV857-32 40 QFN Package VDDQ VDDQ Y1# Y0# Y5# Y1 Y0 Y5 Y6 Y6# VSS Y2# Y2 VDDQ CLK CLK# VDDQ AVDD AVSS VSS 1 2 3 4 5 6 7 8 9 40 39 38 37 36 35 34 33 32 31 30 29 28 Y7# Y7 VDDQ PD# FBIN FBIN# VDDQ VDDQ FBOUT# FBOUT 40 QFN CY2SSTV857-32 27 26 25 24 23 22 10 11 12 13 14 15 16 17 18 19 20 21 Y3# Y4# Y9# Y4 Y9 Y8 y3 VDDQ Pin Description Pin # 48 TSSOP 13, 14 35 36 3, 5, 10, 20, 22 2, 6, 9, 19, 23 5,6 25 26 37,39,3,12,14 36,40,2,11,15 Pin # 40 QFN Pin Name CLK, CLK# FBIN# FBIN Y(0:4) Y#(0:4) Y(9:5) Y#(9:5) FBOUT I/O[1] I I I O O O O O Pin Description Differential Clock Input. Electrical Characteristics LV Differential Input Feedback Clock Input. Connect to FBOUT# for Differential Input accessing the PLL. Feedback Clock Input. Connect to FBOUT for accessing the PLL. Clock Outputs. Clock Outputs. Clock Outputs. Clock Outputs. Feedback Clock Output. Connect to FBIN for Differential Outputs normal operation. A bypass delay capacitor at this output will control Input Reference/Output Clocks phase relationships. Feedback Clock Output. Connect to FBIN# for normal operation. A bypass delay capacitor at this output will control Input Reference/Output Clocks phase relationships. Power Down Input. When PD# is set HIGH, all Q and Q# outputs are enabled and switch at the same frequency as CLK. When set LOW, all Q and Q# outputs are disabled Hi-Z and the PLL is powered down. 2.6V Power Supply for Output Clock Buffers. 2.6V Nominal 2.6V Power Supply for PLL. When VDDA is at 2.6V Nominal GND, PLL is bypassed and CLK is buffered directly to the device outputs. During disable (PD# = 0), the PLL is powered down. Common Ground. Analog Ground. 0.0V Ground 0.0V Analog Ground Differential Outputs Differential Outputs 27, 29, 39, 44, 46 17,19,29,32,34 26, 30, 40, 43, 47 16,20,30,31,35 32 21 33 22 FBOUT# O 37 27 PD# I 4, 11,12,15, 21, 28, 34, 38, 45 16 4,7,13,18,23,24, 28,33,38 8 VDDQ AVDD 1, 7, 8, 18, 24, 25, 1,10 31, 41, 42, 48 17 9 VSS AVSS Note: 1. A bypass capacitor (0.1µF) should be placed as close as possible to each positive power pin ( 66 MHz f > 66 MHz Test Mode only Min. –75 –100 1.5 1.5 – –50 Typ. – – 3.5 3.5 – – Max. 75 100 7.5 7.5 100 50 Unit ps ps ns ns ps ps Ordering Information Part Number CY2SSTV857ZC–32 CY2SSTV857ZC–32T CY2SSTV857LFC–32[15] CY2SSTV857LFC–32T[15] CY2SSTV857ZI–32 CY2SSTV857ZI–32T CY2SSTV857LFI–32[15] CY2SSTV857LFI–32T[15] Lead-Free CY2SSTV857ZXC–32 CY2SSTV857ZXC–32T CY2SSTV857LFXC–32[15] CY2SSTV857LFXC–32T CY2SSTV857ZXI–32 CY2SSTV857ZXI–32T [15] Package Type 48-pin TSSOP 48-pin TSSOP–Tape and Reel 40-pin QFN 40-pin QFN–Tape and Reel 48-pin TSSOP 48-pin TSSOP–Tape and Reel 40-pin QFN 40-pin QFN–Tape and Reel 48-pin TSSOP 48-pin TSSOP–Tape and Reel 40-pin QFN 40-pin QFN–Tape and Reel 48-pin TSSOP 48-pin TSSOP–Tape and Reel Product Flow Commercial, 0° to 70°C Commercial, 0° to 70°C Commercial, 0° to 70°C Commercial, 0° to 70°C Industrial, –40° to 85°C Industrial, –40° to 85°C Industrial, –40° to 85°C Industrial, –40° to 85°C Commercial, 0° to 70°C Commercial, 0° to 70°C Commercial, 0° to 70°C Commercial, 0° to 70°C Industrial, –40° to 85°C Industrial, –40° to 85°C 857-32 0327L11 *SWR# Marketing Part Number Date Code and Fab Location Lot Code Figure 7. Actual Marking on the Device Notes: 13. Period jitter and half-period jitter specifications are separate specifications that must be met independently of each other. 14. All differential input and output terminals are terminated with 120Ω/16 pF, as shown in Figure 5. 15. The ordering part number differs from the marking on the actual device. See Figure 7 for the actual marking on the device. Document #: 38-07557 Rev. *E Page 7 of 9 CY2SSTV857-32 Package Drawing and Dimension 0.500[0.019] 24 48-lead (240-mil) TSSOP II Z4824 1 DIMENSIONS IN MM[INCHES] MIN. MAX. 7.950[0.313] 8.255[0.325] 5.994[0.236] 6.198[0.244] REFERENCE JEDEC MO-153 PACKAGE WEIGHT 0.33gms PART # Z4824 STANDARD PKG. ZZ4824 LEAD FREE PKG. 25 48 12.395[0.488] 12.598[0.496] 1.100[0.043] MAX. GAUGE PLANE 0.25[0.010] 0.20[0.008] 0.851[0.033] 0.950[0.037] 0.500[0.020] BSC 0.170[0.006] 0.279[0.011] 0.051[0.002] 0.152[0.006] SEATING PLANE 0°-8° 0.508[0.020] 0.762[0.030] 0.100[0.003] 0.200[0.008] 51-85059-*C 40-lead QFN 6 x 6 MM LF40A TOP VIEW SIDE VIEW BOTTOM VIEW 0.08[0.003] A 5.90[0.232] 6.10[0.240] 5.70[0.224] 5.80[0.228] N 1 0.60[0.024] DIA. 2 1.00[0.039] MAX. 0.05[0.002] MAX. 0.80[0.031] MAX. 0.20[0.008] REF. C 0.18[0.007] 0.28[0.011] N PIN1 ID 0.20[0.008] R. 1 2 0.45[0.018] 5.70[0.224] 5.80[0.228] 5.90[0.232] 6.10[0.240] 0.30[0.012] 0.50[0.020] (PAD SIZE VARY BY DEVICE TYPE) 0°-12° 0.50[0.020] C 4.45[0.175] 4.55[0.179] 0.24[0.009] 0.60[0.024] (4X) SEATING PLANE 51-85190-** All product and company names mentioned in this document are the trademarks of their respective holders. Document #: 38-07557 Rev. *E Page 8 of 9 © Cypress Semiconductor Corporation, 2005. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. 4.45[0.175] 4.55[0.179] E-PAD CY2SSTV857-32 Document History Page Document Title: CY2SSTV857-32 Differential Clock Buffer/Driver DDR400/PC3200-Compliant Document Number: 38-07557 REV. ** *A ECN No. 128403 129080 Issue Date 08/04/03 09/05/03 Orig. of Change RGL RGL New Data Sheet Changed the maximum operating frequency from 200 MHz to 250 MHz Added Industrial Temperature Range Changed the power supply from 2.5V to 2.6V Changed the supply voltage from 2.38, 2.5 and 2.63V to 2.3, 2.6 and 2.7V, respectively, in the DC Electrical Specifications table Changed the Fo value from 170 MHz to 200 MHz in the DC Electrical Specifications table Changed the Duty Cycle from 49.5 and 50.5 to 49 and 51% (60 to 170 MHz) Changed the Duty Cycle from 49 and 51 to 48 and 52% (101 to 170 MHz) Changed the half period jitter from 100 and 100 ps to 75 and 75 ps in the AC Electrical Specifications table Corrected QFN pinouts in the block diagram and in the Pin Description table Changed the Operating Frequency from 250 MHz to 230 MHz Changed Half Period Jitter and propagation delay Added Lead-free devices except the 40 QFN industrial Description of Change *B *C *D *E 130114 210076 259010 308437 10/28/03 See ECN See ECN See ECN RGL RGL RGL RGL Document #: 38-07557 Rev. *E Page 9 of 9