CY3095

1cCY7C025/0251 CY3670 PTG Programming Kit Features Kit Contents • Supports multiple Cypress EPROM Field Programmable Clock Generators: CY2071AF, CY2291F, CY2292F, CY2292FZ, CY2907F8, and CY2907F14 • Separate device-specific socket adapters • Allows quick and easy prototyping • Compact design for ease of portability • Easy to use interface: Windows 95, Windows 98, and Windows NT 4.0 compatible • User-friendly CyClocksTM software for JEDEC file development • Programmer Unit • Serial Port Cable • AC/DC Adapter • CD containing • CyClocksTM Software • CY_FTG_V2 Programmer Software • Datasheets of supported devices Device-specific socket adapters for the CY2071AF and CY2292F (socket adapters for the other devices are available separately) Functional Description The CY3670 FTG programming kit provides users with a PC the ability to program Cypress EPROM Field-Programmable Clock Generators quickly and easily. The two setup requirements are a power connection and a serial port connection with the PC, as shown in Figure 1. Using CyClocksTM software, users configure their parts to given specifications and generate the corresponding JEDEC file. In addition, CyClocksTM software has PPM optimization and power calculations. The JEDEC file is then loaded into the CY_FTG_V2 software that communicates with the programmer. The CY_FTG_V2 software also has blank-check capabilities along with the ability to read, verify and view the EPROM table from a programmed device. This procedure is outlined in Figure 1 CyClocksTM CY_FTG_V2 Jedec File Bit Stream through RS232 Device Specific Adapter Cypress FTG Programmer - CY3670 Programs: CY2071AF/CY2291F/CY2292F/ CY2907F8/CY2907F14 ON Busy Figure 1. Programming Procedure Cypress Semiconductor Corporation Document #: 38-07410 Rev. NEW • 3901 North First Street • San Jose • CA 95134 • 408-943-2600 Revised March 12, 2002 CY3670 Set Up Hardware receive power through the included AC/DC adapter which is, in turn, hooked up to a standard 110V/220V wall outlet. Then, using the appropriate adapter for the device that is to be programmed, everything needed to program the part is complete. The CY3670 FTG programming kit has a very simple setup procedure. As shown in Figure 2, the two connections are the power and the RS232 cable to the computer. The programmer must be hooked up to a PC through a serial port and must IBM Compatible 220V 110V AC/DC Adapter text Cypress FTG Programmer - CY3670 Programs: CY2071AF/CY2291F/CY2292F/ CY2907F8/CY2907F14 ON Busy Figure 2. FTG Programming Kit Setup[1] Note: 1. When plugging the AC/DC adapter into an outlet, be sure to set the 110V/220V switch to the correct setting (110V in the US) as shown on the power adapter in Figure 2. If no switch exists it will automaically select between 110V and 220V. Document #: 38-07410 Rev. NEW Page 2 of 4 CY3670 Figure 3 is a close up of the socket and illustrates the correct orientation for placing the device in the socket. The device should be placed according to the device placement that appears on each adapter. The dots correspond to pin 1 of the device. Socket CY2292F Pin 1 CY2071AF Pin 1 CY3096 CY309X Figure 3. Device Orientation Diagram On The Adapter Software[2] Setting up the software is just as easy as setting up the hardware. The included CD contains CyClocksTM, CY_FTG_V2, a readme file, and a folder containing datasheets. The readme file contains information on programming procedures and should be read first. To install CyClocksTM, simply run the setup file in the CyClocksTM folder. It prompts the user with a few questions and the goes through a self-install procedure. The CY_FTG_V2 software does not require installation. Simply copy the CY_FTG_V2 directory from the CD to the desired location on your machine. A COM port and BAUD rate must be set the first time CY_FTG_V2 is run. Adapters Depending on the device to be programmed, the appropriate adapter may be included in the kit, or can be ordered from Cypress Semiconductor. To order an adapter, contact your local Cypress FAE or go to http://www.cypress.com/design/store/eprom.html. Table 1 below lists the available adapters and their corresponding devices. Adapter Number Programming Device CY3093 CY2291F CY3095 CY2292F CY3096 CY2071AF CY3097 CY2907F8 CY3098 CY2907F14 CY3099 CY2292FZ Notes: 2. Be sure to check for CyClocksTM updates at http://www.cypress.com/design/products/clock/clocks.html Ordering Information Ordering Code Operating Voltage CY3670 110V / 220V Document #: 38-07410 Rev. NEW Page 3 of 4 CY3670 Document Title: CY3670 PTG Programming Kit Document Number: 38-07410 REV. ECN NO. Issue Date Orig. of Change NEW 114457 03/22/02 CKN Document #: 38-07410 Rev. NEW Description of Change New Datasheet Page 4 of 4 © Cypress Semiconductor Corporation, 2002. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.