CY3655-09

enCoRe and PRoC Family Development Tool Selector Guide Pod Feet Kits Feet are used in conjunction with the pods to connect the to the target board. Through-hole feet (1 for each pin-out) are included in the base development kit, but additional units are available for order. Surface mount feet are only available through order of separate kits. Family Chip part number CY7C638xx enCoRe II CY7C633xx CY7C601xx enCoRe II LV CY7C602xx enCoRe III enCoRe III LV PRoC PRoC LP Package CY7C63833-LFXC CY7C63823-SXC CY7C63823-QXC CY7C63813-PXC CY7C63813-SXC CY7C63803-SXC CY7C63801-PXC CY7C63801-SXC CY7C63310-PXC CY7C63310-SXC CY7C60123-PVXC CY7C60123-PXC CY7C60113-PVXC CY7C60223-PXC CY7C60223-SXC CY7C60223-QXC 32-QFN 24-SOIC 24-QSOP 18-PDIP 18-SOIC 16-SOIC 16-PDIP 16-SOIC 16-PDIP 16-SOIC 48-SSOP 40-PDIP 28-SSOP 24-PDIP 24-SOIC 24-QSOP CY7C64215-56LFXC 56-MLF CY7C64215-28PVXC 28-SSOP CY7C60323-LFXC 32-MLF CY7C60323-PVXC 28-SSOP CY7C64215 CY7C603xx CYWUSB6953 CYWUSB6953-48LFC 40-MLF CYRF69213-LFXC 40-QFN CYRF69103-LFXC 40-QFN CYRF69xx3 Pod/ Flex-pod part number CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODUSB CY3655-PODWIR CY3655-PODWIR CY3655-PODWIR CY3655-PODWIR CY3655-PODWIR CY3655-PODWIR CY3664-56MLF (2 Flex-pods + 2 feet) CY3664-28SSOP (2 Flex-pods + 2 feet) CY3656-32MLF (2 Flex-pods + 4 feet) CY3656-28SSOP (2 Flex-pods + 4 feet) CY3250-21x34QFN CY4672-69213 (1 pod + 2 feet) CY4672-69103 (1 pod + 2 feet) Feet order part number X CY3655-05 CY3655-06 CY3655-07 CY3655-08 CY3655-10 CY3655-09 CY3655-10 CY3655-09 CY3655-10 CY3655-01 CY3655-02 CY3655-03 CY3655-04 CY3655-05 CY3655-06 CY323056MLF-AK CY323028SSOP-AK CY323032MLF-AK CY323028SSOP-AK CY325032QFN-FK CY467240QFN-FK Feet qty X 5 5 2 5 5 2 5 2 5 5 2 5 2 5 5 2 2 2 2 2 4 Programming Tools CY3217 “MiniProg” USB Programmer The MiniProg provides a simple to use and cost effective programming solution that is superb for a development environment. It consists of a USB interface to the development PC and a 5-pin header that is used to connect to the target board. It works in conjunction with the PSoC Programmer software available through download as part of the PSoC Designer tools on the Cypress website. The MiniProg can also be used in conjunction with the CY3216 to program devices out-of-system, or with the CY3655-PLG to program enCoRe II devices in system through the USB connector.The CY3217 kit consists of a single item: the MiniProg programmer. It is the same programmer that is available in the PSoC CY3210-MiniProg1, but provided as a stand-alone item without the PSoC eval board. This kit is an ideal item to enable quick turn programming at multiple development/test sites. 3