CY7C1308SV25C-167BZXC

Cypress Semiconductor Corporation, 198 Champion Court, San Jose, CA 95134. Tel: (408) 943-2600 ADVANCE PRODUCT CHANGE NOTIFICATION APCN: PCN155371 Date: March 27, 2015 Subject: Planned Qualification of Spansion Manufacturing Sites for Cypress Products To: PCN ADMIN CYPRESS pcn_adm@cypress.com Change Type: Major Description of Change: In concert with the recently announced merger between Cypress Semiconductor Corporation (Cypress) and Spansion Inc. (Spansion), Cypress announces plans to qualify proprietary SONOS Technology products at Spansion Fab 25 / Test 25 in Austin, Texas and BGA/TSOP-packaged products at the Spansion assembly facility in Bangkok, Thailand. These qualifications and implementations are expected to occur throughout 2015 and 2016. Once complete, the qualifications will be announced through regular PCNs. This is an advance notification and no immediate action is needed. Refer to the table below for the complete schedule of the activity, PCN issue dates and shipment start dates. Note that the dates are subject to change. Qualification New Site Location PCN Issue First Shipments 350nm SONOS Sort 130nm SONOS Fab 130nm SONOS Sort 48-FBGAs 70-µFBGAs 165-FBGAs 121-FBGAs 48-TSOPs Test 25 Fab 25 Test 25 SP-BKK SP-BKK SP-BKK SP-BKK SP-BKK Austin, Texas Austin, Texas Austin, Texas Bangkok, Thailand Bangkok, Thailand Bangkok, Thailand Bangkok, Thailand Bangkok, Thailand Q2 2015 Q4 2015 Q4 2015 Q2 2015 Q3 2015 Q3 2015 Q4 2015 Q4 2015 Q3 2015 Q1 2016 Q1 2016 Q3 2015 Q4 2015 Q4 2015 Q1 2016 Q1 2016 Benefit of Change: This transfer will enable Cypress to continue to meet its delivery commitments by having a continued supply from alternate qualified sources. Document No.001-11741, Rev. *G Page 1 of 2 Affected Part Numbers: 1505 Affected Parts: Please see the attached file for the list of parts affected by this notice. Note that the CCG1 USB Type-C Port Controller, the EZ-PDTM CCG2 USB Type-C Cable Controller and the TrueTouch® Fingerprint parts, which are not yet in production, will also be qualified at Fab 25 and Test 25. Qualification Status: Estimated completion dates for the internal qualification of Cypress parts are provided in the table above. Approximate Implementation Date: Estimated implementation dates are from April 2015 to March 2016 Anticipated Impact: No impact is expected in datasheet parameters, package composition and package pin-out. Method of Identification: Cypress maintains traceability of product to wafer level, including wafer fabrication location, through the lot number marked on the package. Response Required: This is an information only announcement. No response is required. For additional information regarding this change, contact your local sales representative or contact the PCN Administrator at pcn_adm@cypress.com. Sincerely, Cypress PCN Administration Document No.001-11741 Rev. *G Page 2 of 2