CY7C343B-25JJI

43B CY7C343B 64-Macrocell MAX® EPLD Features • • • • 64 MAX macrocells in 4 LABs 8 dedicated inputs, 24 bidirectional I/O pins Programmable interconnect array Advanced 0.65-micron CMOS technology to increase performance • Available in 44-pin HLCC, PLCC • Lowest power MAX device The CY7C343B contains 64 highly flexible macrocells and 128 expander product terms. These resources are divided into four Logic Array Blocks (LABs) connected through the Programmable Inter-connect Array (PIA). There are 8 input pins, one that doubles as a clock pin when needed. The CY7C343B also has 28 I/O pins, each connected to a macrocell (6 for LABs A and C, and 8 for LABs B and D). The remaining 36 macrocells are used for embedded logic. The CY7C343B is excellent for a wide range of both synchronous and asynchronous applications. Functional Description The CY7C343B is a high-performance, high-density erasable programmable logic device, available in 44-pin PLCC and HLCC packages. Logic Block Diagram 9 INPUT 11 INPUT 12 INPUT 13 INPUT DEDICATED INPUTS SYSTEM CLOCK LAB A 2 4 5 6 7 8 MACROCELL 1 MACROCELL 2 MACROCELL 3 MACROCELL 4 MACROCELL 5 MACROCELL 6 MACROCELLS 7 - 16 LAB D MACROCELL 56 MACROCELL 55 MACROCELL 54 MACROCELL 53 MACROCELL 52 MACROCELL 51 MACROCELL 50 MACROCELL 49 1 44 42 41 40 39 38 37 INPUT 35 INPUT/CLK 34 INPUT 33 INPUT 31 I/O PINS I/O PINS LAB B 15 16 17 18 19 20 22 23 MACROCELL 17 MACROCELL 18 MACROCELL 19 MACROCELL 20 MACROCELL 21 MACROCELL 22 MACROCELL 23 MACROCELL 24 MACROCELLS 25 - 32 (3, 14, 25, 36) (10, 21, 32, 43) P I A MACROCELLS57 - 64 LAB C MACROCELL 38 MACROCELL 37 MACROCELL 36 MACROCELL 35 MACROCELL 34 MACROCELL 33 I/O PINS 30 29 28 27 26 24 I/O PINS MACROCELLS39 - 48 VCC GND C343B-1 MAX is a registered trademark of Altera Corporation. Cypress Semiconductor Corporation Document #: 38-03038 Rev. ** • 3901 North First Street • San Jose • CA 95134 • 408-943-2600 Revised December 8, 1999 CY7C343B Pin Configuration HLCC, PLCC Top View GND V CC I/O I/O I/O I/O I/O I/O I/O I/O I/O 6 I/O I/O INPUT GND INPUT INPUT INPUT VCC I/O I/O I/O 7 8 9 10 11 12 13 14 15 16 17 5 4 3 2 1 44 43 42 41 40 39 38 37 36 35 34 33 32 I/O I/O I/O VCC INPUT INPUT/CLK INPUT GND INPUT I/O I/O 7C343 31 30 29 18 19 20 21 22 23 24 25 26 27 28 GND I/O I/O I/O I/O I/O I/O I/O I/O V CC I/O C343B-2 Selection Guide 7C343B-25 Maximum Access Time (ns) 25 7C343B-30 30 7C343B-35 35 Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Storage Temperature .................................. –65°C to+135°C Ambient Temperature with Power Applied.............................................. –65°C to+135°C Maximum Junction Temperature (Under Bias)................................................................. 150°C Supply Voltage to Ground Potential[1] ............. –2.0V to+7.0V DC Output Current, per Pin[1] ................... –25 mA to +25 mA DC Input Voltage[1] ......................................... –2.0V to +7.0V Operating Range Range Commercial Industrial Military Ambient Temperature 0°C to +70°C –40°C to +85°C –55°C to +125°C (Case) VCC 5V ±5% 5V ±10% 5V ±10% Note: 1. Minimum DC input is –0.3V. During transactions, the inputs may undershoot to –2.0V or overshoot to 7.0V for input currents less then 100 mA and periods shorter than 20 ns. Document #: 38-03038 Rev. ** Page 2 of 12 CY7C343B Electrical Characteristics Over the Operating Range Parameter VCC VOH VOL VIH VIL IIX IOZ tR tF Description Supply Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Level Input LOW Level Input Current Output Leakage Current Recommended Input Rise Time Recommended Input Fall Time VI = VCC or ground VO = VCC or ground Test Conditions Maximum VCC rise time is 10 ms IOH = –4.0 mA DC IOL = 8 mA DC[2] 2.0 – 0.3 – 10 – 40 [2] Min. 4.75(4.5) 2.4 Max. 5.25(5.5) 0.45 VCC+0.3 0.8 +10 +40 100 100 Unit V V V V V µA µA ns ns Capacitance Parameter CIN COUT Description Input Capacitance Output Capacitance Test Conditions VIN = 0V, f = 1.0 MHz VOUT = 0V, f = 1.0 MHz Max. 10 20 Unit pF pF Note: 2. The IOH parameter refers to high-level TTL output current; the IOL parameter refers to low-level TTL output current. AC Test Loads and Waveforms R1 464Ω 5V OUTPUT 50 pF INCLUDING JIG AND SCOPE R2 250Ω 5V OUTPUT 5 pF INCLUDING JIG AND SCOPE R2 250Ω 3.0V 10% GND