LUPA 1300-2 500 FPS High Speed CMOS Sensor
CYIL2SM1300AA Product Brief
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
1280 x 1024 active pixels 14 µm X 14 µm square pixels 1" optical format Monochrome or color digital output 500 fps frame rate On-chip 10-bit ADCs 12 LVDS serial outputs Random programmable ROI readout Pipelined, Triggered and Snapshot shutter On-chip column FPN correction Serial to Parallel Interface (SPI) Limited supplies: Nominal 2.5V (some supplies require 3.3V) 0°C to 70°C operational temperature range 168-pin uPGA package Power dissipation: 1.2W
a wide range of operating modes and features an LVDS interface for easy system integration. By removing the visually highly disturbing column patterned noise, this sensor allows building a camera without having to perform any off-line correction or the need for any memory making this sensor highly suitable for lower cost applications. Moreover, since the on-chip column FPN correction is more reliable than an off-line correction as it is intrinsically compensated for supply and temperature variations, this sensor also allows to build reliable high-end camera's without having to worry about column FPN appearing in environments with highly varying ambient temperatures. The sensor requires only one master clock for operation up to 500 fps. It is housed in a 168-pin ceramic µPGA package. The LUPA 1300-2 is available in a monochrome version or Bayer (RGB) patterned color filter array and is available with and without glass.
LUPA 1300-2 Die Photo
Applications
■ ■ ■ ■ ■
High speed machine vision Motion analysis Intelligent traffic system Medical imaging Industrial imaging
Description
The LUPA 1300-2 is a highly integrated SXGA high speed, high sensitivity CMOS image sensor targeted at various high speed machine vision and industrial monitoring applications. The sensor runs at 500fps and features triggered and pipelined shutter modes. The sensor packs 24 parallel 10-bit A/D converters with an aggregate conversion rate of 740 MSPS. On-chip digital column FPN correction allows the sensor to output ready-to-use image data for all but the most demanding applications. In order to allow simple and reliable system integration, the 13 channel 8 Gbps LVDS serial link protocol supports per channel skew correction and serial link integrity monitoring. Peak responsivity of the 14x14um 6T pixel is 7350 V.m2/W.s. Dynamic range is measured to be 57dB. In full frame video mode, the sensor consumes 1.2W from a 2.5V power supply. The sensors integrates A/D conversion, on-chip timing for
Ordering Information
Marketing Part Number (ES Samples)
CYIL2SM1300AA-GDCES CYIL2SM1300AA-GWCES CYIL2SC1300AA-GDCES CYIL2SC1300AA-GWCES
Mono/Color
mono with glass mono without glass color with glass color without glass
Package
168 pin ceramic uPGA
Cypress Semiconductor Corporation Document Number: 001-49820 Rev. **
•
198 Champion Court
•
San Jose, CA 95134-1709 • 408-943-2600 Revised October 29, 2008
LUPA 1300-2
General Specifications
Parameter
Active Pixels Pixel Size Pixel Type Pixel Rate Shutter Type Frame Rate
Electro-Optical Specifications
Specifications Parameter
Conversion gain Full well charge Responsivity Fill factor Parasitic light sensitivity Dark noise QE x FF FPN PRNU Dark signal Power dissipation 34uV/e 30000e 7350 V.m2/W.s @680nm 40% < 1/10000 37e35% @ 680nm 2% of Vsat
很抱歉,暂时无法提供与“LUPA1300-2”相匹配的价格&库存,您可以联系我们找货
免费人工找货