S6SBP201A1AVA1001

S6SBP201A1AVA1001 S6SBP202A1FVA1001 S6SBP203A8FVA1001 Automotive PMIC Evaluation Kit Operation Manual Doc. No. 002-08763 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com Copyrights Copyrights Copyright © 2015-2016 Cypress Semiconductor Corporation. All rights reserved. Spansion®, the Spansion logo, MirrorBit®, MirrorBit® EclipseTM, ORNANDTM, Easy DesignSimTM, TraveoTM and combinations thereof, are trademarks and registered trademarks of Cypress Semiconductor Corp. ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries. Purchase of I2C components from Cypress or one of its sublicensed Associated Companies conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors. The information in this document is subject to change without notice and should not be construed as a commitment by Cypress. While reasonable precautions have been taken, Cypress assumes no responsibility for any errors that may appear in this document. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Flash Code Protection Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products. 2 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A Preface This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and Use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this Document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives. S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 3 Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. Caution of the Products Described in this Document The following precautions apply to the product described in this manual. WARNING Electric Shock, Damage Electric Shock, Damage Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user’s system if the product is not used correctly. Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault. Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this CAUTION product or devices connected to it, or may cause to loose software resources and other properties such as data, if the device is not used appropriately. Before moving the product, be sure to turn off all the power supplies and unplug the cables. Cuts, Damage Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. Cuts The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Handle the product with due care not to get injured with such pointed parts. Do not place anything on the product or expose the product to physical shocks. Do not carry the Damage product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Since the product contains many electronic components, keep it away from direct sunlight, high Damage temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Damage Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault. To prevent electrostatic breakdown, do not let your finger or other object come into contact with Damage the metal parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your body. When turning the power on or off, follow the relevant procedure as described in this document. Damage Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Because the product has no casing, it is recommended that it be stored in the original Damage packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product. 4 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A Contents Description ..................................................................................................................................................... 6 1. Description...................................................................................................................................... 6 2. Evaluation Board Specification ....................................................................................................... 7 3. Pin Descriptions .............................................................................................................................. 8 3.1 Input/Output Pin Descriptions .............................................................................................. 8 3.2 Jumper Descriptions ............................................................................................................ 8 4. Setup .............................................................................................................................................. 9 4.1 Connecting .......................................................................................................................... 9 4.2 Verification........................................................................................................................... 9 5. Layout ........................................................................................................................................... 10 5.1 Component Layout ............................................................................................................ 10 5.2 Wiring Layout..................................................................................................................... 11 6. Circuit Schematic .......................................................................................................................... 12 7. Component List............................................................................................................................. 13 8. Ordering Information ..................................................................................................................... 14 Revision History........................................................................................................................................... 15 Document Revision History ................................................................................................................... 15 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 5 Details 1. Description S6SBP201A1AVA1001, S6SBP202A1FVA1001 and S6SBP203A8FVA1001 are the evaluation kit for primary power block of automotive. These boards implement power management IC S6BP201A, S6BP202A, S6BP203A each. It is necessary to prepare DC power supply. Figure 1 Board Outline S6SBP201A1AVA1001 S6SBP202A1FVA1001 S6SBP203A8FVA1001 VIN VBATf DC Power Supply 2.5V to 42V PGND1f π Type Filter S6BP201A : PMIC S6BP202A : PMIC S6BP203A : PMIC ENA Buck-Boost C-mode DC/DC VOUTf PGND2f VOUT 5.000V / 1.0A: S6SBP201A1AVA1001 5.000V / 2.4A: S6SBP202A1FVA1001 3.3V / 2.4A: S6SBP203A8FVA1001 Regulator MODE SYNC Chip Control PG Sync/OSC S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 6 Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 2. Evaluation Board Specification Table 1 Evaluation Board Specification S6SBP201A1AVA1001 Item Symbol Min. Typ. Max. Unit Input Voltage VIN 2.5 12 42 V Output Voltage VOUT - 5.0 - V Output Current IOUT - - 1.0 A VIN 2.5 12 42 V Output Voltage VOUT - 5.0 - V Output Current IOUT - - 2.4 A VIN 2.5 12 24 V Output Voltage VOUT - 3.3 - V Output Current IOUT - - 2.4 A Input Voltage S6SBP202A1FVA1001 Input Voltage S6SBP203A8FVA1001 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 7 Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 3. 3.1 Pin Descriptions Input/Output Pin Descriptions Table 2 Input/Output Pin Descriptions 3.2 Connecter Symbol I/O VBATf I DC power supply terminal Function Description VOUTf O DC/DC converter output terminal ENA I DC/DC converter enable terminal MODE I PFM/PWM mode control terminal SYNC I External clock input terminal PG O DC/DC converter power good terminal PGND1f,PGND2f - Ground terminal Jumper Descriptions Table 3 Jumper Descriptions Jumper Description Initial Setting Shorted between VIN and ENA pin JP1 JP1 Short: ENA pin is set to the H level. JP1 Open: ENA pin is set to the L level. Input external signal to ENA pin. Open Don’t input external signal to EN1 pin with shorted JP1. Shorted between VOUTf and MODE pin JP3 Short: Fixed PWM operation. JP3 JP3 Open: Automatic PWM/PFM switching operation. Don’t input external signal to MODE pin with shorted JP3. Open In case of providing external clock to SYNC, the mode is fixed PWM operation. 8 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 4. 4.1 Setup Connecting 1. Connect the board to the power supply, load equipment and voltage meter as below. Figure 2 Connecting the Board and Some Equipment +12V Power Supply + - Voltage + Meter + 4.2 Load Verification 1. Connect ENA pin to PGND1f, then, turn on +12V power supply. 2. Connect ENA pin to VBATf, then, DC/DC converter will start output. 3. Check that VOUTf is the same as the 'Output Voltage' of Figure 2-1 Evaluation Board Specification. S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 9 Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 5. 5.1 Layout Component Layout Figure 3 Evaluation Board Component Layout Layer1 Top View Layer4 Top View Board size: 65mm × 65mm 10 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 5.2 Wiring Layout Figure 4 Evaluation Board Wiring Layout layer 1 Top View layer 2 Top View layer 3 Top View layer 4 Top View S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 11 Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 6. Circuit Schematic Figure 5 Evaluation Board Circuit Schematic VIN FB1 L2 VBATf ＋ C6-2 C7 PGNDf VIN VIN 5 PVIN 3 VIN VCC 8 C1-1 C3-2 C3-1 BST 4 VCC R2 C2 LX1 2 C5-1 VCC M1 13 FB VOUT 7 MODE MODE JP3 L1 LX2 15 JP1 6 ENA VOUTf C4-1 C4-2 C4-3 11 SYNC VIN VOUT VOUT 14 VOUT SYNC D3 PGND1 1 PGND2 16 PGND2f ENA VCC 12 RT R1 9 GND1 R6 PG 10 VOUT R7 PG 17 GND2 EP 12 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 7. Component List Table 4 Evaluation Board Component List Rated Rated Voltage(V) Current(A) 0.1 µF 50 - - 0.1 µF 50 - - TDK 10 µF 50 - - TDK 0.1 µF 50 - - CGA6P1X7R1C226M250AC TDK 22 µF 16 - - CGA6P1X7R1C226M250AC TDK 22 µF 16 - - CGA2B3X7R1H104K050BB TDK 0.1 µF 50 - - C5-1 CGA4J3X7R1C475K125AB TDK 4.7 µF 16 - - C6-1 CGA5L3X7R1H475K160AB TDK 4.7 µF 50 - - 10 C6-2 CGA2B3X7R1H104K050BB TDK 0.1 µF 50 - - 11 C7 - - - - - No. Component Parts Number Vendor Value 1 C1-1 CGA2B3X7R1H104K050BB TDK 2 C2 CGA2B3X7R1H104K050BB TDK 3 C3-1 CGA9N3X7R1H106K230KB 4 C3-2 CGA2B3X7R1H104K050BB 5 C4-1 6 C4-2 7 C4-3 8 9 Remarks NMT S6SBP201A1AVA1001, 12 D3 - - - - - S6SBP202A1FVA1001 RB521S30T1G ON Semi - 30 0.2 S6SBP203A8FVA1001 NMT 13 FB1 RK73Z2A KOA 0Ω - 2 - 14 L1 CLF7045T-2R2N-D TDK 2.2 µH - 7.3 - 15 L2 CLF7045T-4R7N-D TDK 4.7 µH - 3.6 - 16 M1 Cypress - - - 17 R1 RK73H1JTTD2202F KOA 22 kΩ - - - 18 R2 RK73Z1E KOA 0Ω - 1 - 19 R6 - - - - - NMT 20 R7 RK73H1JTTD1003F KOA 100 kΩ - - - S6BP201A1AST2B000 S6BP202A1FST2B000 S6SBP201A1AVA1001 S6BP203A8FST2B000 TDK : S6SBP202A1FVA1001 S6SBP203A8FVA1001 TDK Corporation ON Semi : ON Semiconductor KOA : KOA Corporation Cypress : Cypress Semiconductor Corp NMT: No mount. These components are compliant with RoHS, and please ask each vendor for details if necessary. S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 13 Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 8. Ordering Information Table 5 Ordering Information Part Number EVB Revision Note S6SBP201A1AVA1001 S6SBP201A-VA1 Mounted IC: S6BP201A1AST2B000 S6SBP202A1FVA1001 S6SBP202A-VA1 Mounted IC: S6BP202A1FST2B000 S6SBP203A-VA1 S6SBP203A8FVA1001 14 Rev 2.0 Mounted IC: S6BP203A8FST2B000 S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A Revision History Document Revision History Document Title: S6SBP201A1AVA1001, S6SBP202A1FVA1001, S6SBP203A8FVA1001 Automotive PMIC Evaluation Kit Operation Manual Document Number: Revision ECN No. 002-08763 Origin of Description of Change Change ** *A 5085048 TAOA New Specification TAOA Updated Table “Evaluation Board Specification ” S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A 15