S6T3J300411A176A2

AN214051 Getting Started with the TRAVEO™ Family S6J3400 Series About this document Scope and purpose AN214051 describes the development tools available for the TRAVEO™ family S6J3400 series. Associated Part Family TRAVEO™ Family S6J3400 Series Table of contents About this document ....................................................................................................................... 1 Table of contents ............................................................................................................................ 1 1 Introduction .......................................................................................................................... 2 2 TRAVEO™ Family S6J3400 series feature set .............................................................................. 3 3 3.1 3.2 3.3 Development environment and tools ....................................................................................... 4 Evaluation board ..................................................................................................................................... 4 Sample software...................................................................................................................................... 4 Debugging tools ...................................................................................................................................... 4 4 Connection diagram and operation modes ................................................................................ 5 5 Summary .............................................................................................................................. 7 6 Related documents ................................................................................................................ 8 Revision history.............................................................................................................................. 9 Application Note www.infineon.com Please read the Important Notice and Warnings at the end of this document page 1 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Introduction 1 Introduction This application note describes the development environment and tools to get started with the TRAVEO™ family S6J3400 series. The series includes an Arm® Cortex®-R5F CPU core with Secure Hardware Extension (SHE), CAN FD, memory, and analog and digital peripheral functions in a single chip. The product lineup of the S6J3400 series features 100-pin to 176-pin packages and memory size variations. Refer to the related documents for more details. Application Note 2 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series TRAVEO™ Family S6J3400 series feature set 2 TRAVEO™ Family S6J3400 series feature set The TRAVEO™ family S6J3400 series has a body control module (BCM) feature and other resources, as Figure 1 shows. 2-ch QPRC 8-ch Free-run Timer 4-ch Source Clock Timer External NMI/ 32 External IRQ Watchdog CSV Oscillators 12-ch Input Capture GPIO 12-ch Output Compare OCD (JTAG) Trace LVD 6-ch Reload Timer Partial Wakeup PLLs SSCG PLL Arm Cortex® R5F FPU, Safety, Security CRC SHE Standard I/O Relocation Power Management Flash D-Cache Work-Flash I-Cache RAM PPU TPU 14-ch Multifunctional Serial 1-ch RTC 64-ch Base Timer DMA 6-ch CAN FD 32-ch x2 12-bit ADC Figure 1 TRAVEO™ Family S6J3400 series block diagram (maximum channels) The following are the major features of the TRAVEO™ family S6J3400 series. For more information, see related documents. • 32-bit MCU core system − Up to 132-MHz Arm Cortex-R5F − Up to 1-MB flash memory, up to 128-KB RAM with backup RAM • Supply voltage − 3.3 V or 5.0 V • Interface − Up to 6-ch CAN FD, up to 14-ch multifunction serial interface • ADC − Up to 64 ch • Packages − 100-pin LQFP − 144-pin LQFP − 176-pin TEQFP Application Note 3 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Development environment and tools 3 Development environment and tools 3.1 Evaluation board Cypress provides a wealth of evaluation boards to help you get started with an MCU. The S6J3400 series evaluation boards work by connecting the main board and sub-board. Contact your sales representative or Cypress Technical Support if you want to buy the evaluation board. Table 1 lists the functions that can be used by the TRAVEO™ board connection and the current part numbers for the evaluation boards in the S6J3400 series for the 176-pin, 144-pin, and 100-pin packages with MCU. Table 1 Evaluation boards Part number S6T3J300411A000A2 S6T3J300411A176A2 S6T3J300411A144A2 S6T3J300411B100A2 Description Main board Sub-board Sub-board Sub-board Pins – 176 144 100 CAN FD 6 ch – – – LIN 2 ch – – – CXPI 1 ch – – – ADC 64 ch – – – Main board – Connect Connect Connect 3.2 Sample software Contact your sales representative or Cypress Technical Support if you want to use the sample software. 3.3 Debugging tools Debugging tools are provided by third parties, as listed in Table 2. Cypress provides sample software (template project and sample driver) for each tool. The template project includes I/O header files, startup settings, and some sample sources. It is recommended to start using the S6J3400 series with the evaluation board and tools. The sample driver includes some sources for peripheral features of the S6J3400 series. Table 2 Debugging tools Vendor Software (Integrated development environment) Hardware (Debugging tools) Green Hills Software MULTI v2015.1.6 or later Green Hills Probe IAR Systems IAR Embedded Workbench for Arm (EWARM) v7.30.4 or later I-jet Application Note 4 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Connection diagram and operation modes 4 Connection diagram and operation modes The S6J3400 series has JTAG ports to connect with a debugging tool, but the nRESET JTAG port is not supported in this series. Therefore, nRESET should be connected to the RSTX port of this product, if needed. Figure 2 shows an example of a basic connection diagram for S6J342AF. +5V0_S +5V0_S +5V0_S Resistor JTAG Arm 20 pin 10kohm S6J342AF TRST TDI TMS TCK 81 80 79 78 20ohm TDO RSTX 1 3 5 7 9 11 13 15 17 19 Resistor 77 89 2 Resistor 10kohm DGND Figure 2 Application Note 4 6 8 10 12 14 16 18 20 Resistor 10kohm DGND VseVnse nTRST TDI TMS TCK RTCK TDO nRESET Pull dow n Pull dow n VCC GND GND GND GND GND GND GND GND GND DGND S6J342AF basic connection diagram with Arm JTAG 20 5 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Connection diagram and operation modes The S6J3400 series has a User mode and Serial Write modes. Figure 2 shows the User mode connection. The Serial Write modes use P020 and P022 with the MODE port. Table 3 lists the operation modes combined with the MODE, P020, and P022 ports. The Serial Write modes (sync and async) support writing a user program to the flash memory included in the MCU through the UART connection. The PC and target MCU are connected via a serial cable. Cypress provides flash program software that works on the PC, and the evaluation board has an UART port. Contact your sales representative or Cypress Technical Support if you want to evaluate the flash program software. In addition, a serial flash memory programmer provided by DTS INSIGHT Corporation supports writing a user program to the flash memory using a serial port in the S6J3400 series. A Parallel Flash programmer provided by Minato Advanced Technologies Inc. and BPM Microsystems Inc. supports writing a user program to the flash memory. Table 3 Operation modes Operation mode MODE P020 P022 User mode 1 – – Serial Write mode (sync) 0 1 0 Serial Write mode (async) 0 1 1 JTAG boundary scan mode 0 0 0 Application Note 6 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Summary 5 Summary Cypress provides a wealth of evaluation boards and sample software to help you get started with TRAVEO™. To evaluate the S6J3400 series evaluation boards, contact your sales representative or Cypress Technical Support. Application Note 7 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Related documents 6 Related documents • TRAVEO™ Family Hardware Manual Platform Part • S6J3400 Series 32-Bit Microcontroller TRAVEO™ Family Hardware Manual • S6J3400 Series 32-Bit Microcontroller TRAVEO™ Family Datasheet Application Note 8 of 10 002-14051 Rev. *C 2021-06-22 Getting Started with the TRAVEO™ Family S6J3400 Series Revision history Revision history Document version Date of release Description of changes ** 2016-08-05 New application note. *A 2017-08-01 Updated Cypress Logo and Copyright. *B 2019-08-29 Updated TRAVEO™ Family S6J3400 series feature set: Updated description. Updated Development environment and tools: Updated Evaluation board: Updated Table 1 (Replaced S6T3J300411A100A2 with S6T3J300411B100A2). Updated Connection diagram and operation modes: Updated Table 3. Updated Related documents: Added hyperlinks in required places. Updated to new template. Completing Sunset Review. *C 2021-06-22 Updated to Infineon template. Application Note 9 of 10 002-14051 Rev. *C 2021-06-22 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2021-06-22 Published by Infineon Technologies AG 81726 Munich, Germany © 2021 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Go to www.cypress.com/support Document reference 002-14051 Rev. *C IMPORTANT NOTICE The information contained in this application note is given as a hint for the implementation of the product only and shall in no event be regarded as a description or warranty of a certain functionality, condition or quality of the product. Before implementation of the product, the recipient of this application note must verify any function and other technical information given herein in the real application. Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind (including without limitation warranties of noninfringement of intellectual property rights of any third party) with respect to any and all information given in this application note. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.