BTA1542N3_08

CYStech Electronics Corp. PNP Epitaxial Planar Transistor Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 1/8 BTA1542N3 Features • Large current capability • Low collector-to-emitter saturation voltage • High speed switching • Ultra small package facilitates miniaturization in end products • High allowable power dissipation • Pb-free package Symbol BTA1542N3 Outline SOT-23 B：Base C：Collector E：Emitter Absolute Maximum Ratings (Ta=25°C) Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Base Current Power Dissipation Junction Temperature Storage Temperature DC Pulse Symbol VCBO VCEO VEBO IC ICP IB Pd Tj Tstg Limits -30 -20 -5 -3 -5 -600 225 0.9 (Note) 150 -55~+150 Unit V V V A mA mW W °C °C Note : When device mounted on a ceramic board (600mm²×0.8mm) BTA1542N3 CYStek Product Specification CYStech Electronics Corp. Characteristics (Ta=25°C) Symbol BVCBO BVCEO BVEBO ICBO IEBO *VCE(sat)1 *VCE(sat)1 *VBE(sat) *hFE fT Cob ton tstg tf Min. -30 -20 -5 250 Typ. 380 25 50 270 25 Max. -100 -100 -300 -200 -1.2 560 Unit V V V nA nA mV mV V MHz pF ns ns ns Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 2/8 Test Conditions IC=-10μA, IE=0 IC=-1mA, IB=0 IE=-10μA, IC=0 VCB=-30V, IE=0 VEB=-4V, IC=0 IC=-1.5A, IB=-30mA IC=-1.5A, IB=-75mA IC=-1.5A, IB=-30mA VCE=-2V, IC=-500mA VCE=-10V, IC=-500mA VCB=-10V, IE=0A, f=1MHz VCC=-12V, RL=24Ω, IC=20IB1=-20IB2=-500mA *Pulse Test : Pulse Width ≤380μs, Duty Cycle≤2% Ordering Information Device BTA1542N3 Package SOT-23 (Pb-free) Shipping 3000 pcs / Tape & Reel Marking SH BTA1542N3 CYStek Product Specification CYStech Electronics Corp. Characteristic Curves Output Characteristics 0.25 IB=500uA Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 3/8 Output Characteristics 1.2 IB=2.5mA Collector Current---IC(A) IB=400uA IB=300uA IB=200uA IB=100uA Collector Current---IC(A) 0.2 0.15 0.1 0.05 1 0.8 0.6 0.4 0.2 0 IB=1mA IB=500uA IB=0 IB=2mA IB=1.5mA IB=0 0 0 1 2 3 4 5 Collector-to-Emitter Voltage---VCE(V) 6 0 1 2 3 4 5 Collector-to-Emitter Voltage---VCE(V) 6 Output Characteristics 3.5 3 IB=10mA IB=8mA IB=6mA Output Characteristics 6 IB=25mA Collector Current---IC(A) Collector Current---IC(A) 5 IB=20mA 2.5 2 1.5 1 0.5 4 3 2 1 IB=15mA IB=10mA IB=5mA IB=4mA IB=2mA IB=0 IB=0 0 0 1 2 3 4 5 Collector-to-Emitter Voltage---VCE(V) 6 0 0 1 2 3 4 5 Collector-to-Emitter Voltage---VCE(V) 6 Current Gain vs Collector Current 1000 VCE=5V Saturation Voltage vs Collector Current 10000 VCE(SAT) Saturation Voltage---(mV) Current Gain---HFE 1000 IC=50IB IC=30IB 100 VCE=2V 10 IC=10IB IC=20IB 100 1 10 100 1000 Collector Current---IC(mA) 10000 1 1 10 100 1000 10000 Collector Current---IC(mA) BTA1542N3 CYStek Product Specification CYStech Electronics Corp. Characteristic Curves(Cont.) Saturation Voltage vs Collector Current 10000 1000 Power Dissipation---PD(mW) Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 4/8 Power Derating Curves Saturation Voltage---(mV) IC=10IB 900 800 700 600 500 400 300 200 100 0 See note on page 1 1000 100 1 10 100 1000 Collector Current---IC(mA) 10000 0 50 100 150 200 Ambient Temperature---TA(℃) BTA1542N3 CYStek Product Specification CYStech Electronics Corp. Reel Dimension Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 5/8 Carrier Tape Dimension BTA1542N3 CYStek Product Specification CYStech Electronics Corp. Product Designation Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 6/8 BTA1542N3 CYStek Product Specification CYStech Electronics Corp. Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 7/8 Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds 240 +0/-5 °C 10-30 seconds 6°C/second max. 6 minutes max. Pb-free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds 260 +0/-5 °C 20-40 seconds 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. BTA1542N3 CYStek Product Specification CYStech Electronics Corp. SOT-23 Dimension Spec. No. : C599N3 Issued Date : 2005.12.30 Revised Date : 2008.04.22 Page No. : 8/8 A L 3 B 1 2 S Marking: Product Code Date Code: Year+Month Year: 3→2003, 4→2004 Month: 1→1, 2→2,‧‧‧ 9→9, A→10, B→11, C→12 3-Lead SOT-23 Plastic Surface Mounted Package CYStek Package Code: N3 Style : Pin 1.Base 2.Emitter 3.Collector J V G C D K H *:Typical DIM A B C D G H Inches Min. Max. 0.1102 0.1204 0.0472 0.0630 0.0335 0.0512 0.0118 0.0197 0.0669 0.0910 0.0005 0.0040 Millimeters Min. Max. 2.80 3.04 1.20 1.60 0.89 1.30 0.30 0.50 1.70 2.30 0.013 0.10 DIM J K L S V Inches Min. Max. 0.0034 0.0070 0.0128 0.0266 0.0335 0.0453 0.0830 0.1083 0.0098 0.0256 Millimeters Min. Max. 0.085 0.177 0.32 0.67 0.85 1.15 2.10 2.75 0.25 0.65 Notes : 1.Controlling dimension : millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material : • Lead : 42 Alloy ; solder plating • Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYSrek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. BTA1542N3 CYStek Product Specification