CSOD4006

CYStech Electronics Corp. Spec. No. : C327SF Issued Date : 2003.05.16 Revised Date : Page No. : 1/3 CSOD400XSF Series 1.0Amp. Surface Mount Glass Passivated Type Rectifiers Features • For surface mounted application • Low forward voltage drop • High current capability • Easy pick and place • Low leakage current • Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 Utilizing Flame Retardant Epoxy Molding Compound. • High temperature soldering: 250°C/10 seconds at terminals • Exceeds environmental standards of MIL-S-19500/228 Mechanical Data • Case: Molded Plastic , JEDEC SOD-123 / mini-SMA. • Terminals: Solder plated. Solderable per MIL-STD-750 Method 2026 • Polarity: Indicated by cathode band. • Mounting Position: Any. • Weight: 0.04 gram Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. CSOD CSOD CSOD CSOD CSOD CSOD CSOD Units Type Number 4001 4002 4003 4004 4005 4006 4007 Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average 1 A Forward Rectified Current Peak Forward Surge Current, 8.3ms Single 30 A Half Sine-wave Superimposed on Rated Load(JEDEC method) Maximum Instantaneous 1.1 V Forward Voltage @ 1.0A Maximum DC Reverse Current at 5(@Ta=25°C) µA Rated DC Blocking Voltage 50(@Ta=100°C) Maximum Reverse Recovery Time (Note 1) 1.8 µs Thermal Resistance, Junction to Ambient 60 ℃/W Typical Junction Capacitance (Note 2) 15 pF Operating Temperature Range Tj -55 to +150 °C Storage Temperature Range Tstg -55 to +150 °C Note1: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note2: Measured at 1 MHz and Applied VR=4.0Volts CSOD400XSF CYStek Product Specification CYStech Electronics Corp. Characteristic Curves Forward Current Derating Curve 1.2 Peak Forward Surge Current---IFSM(A) 35 30 25 20 15 10 5 0 0 20 40 60 80 100 120 140 160 180 200 1 10 Spec. No. : C327SF Issued Date : 2003.05.16 Revised Date : Page No. : 2/3 Maximum Non-Repetitive Forward Surge Current Average Forward Current---Io(A) 1 0.8 0.6 0.4 0.2 0 Single phase, half wave, 60Hz. Resistive or inductive load Tj=25℃, 8.3ms Single Half Sine Wave JEDEC method 100 Ambient Temperature---TA(℃) Number of Cycles at 60Hz Forward Current vs Forward Voltage 100 Junction Capacitance---CJ(pF) 0.9 1 1.1 1.2 1.3 Tj=25℃, Pulse width=300μs 1% Duty cycle 35 30 25 20 15 10 5 Junction Capacitance vs Reverse Voltage Forward Current---IF(A) 10 1 0.1 0.01 0.6 0.7 0.8 0 0.01 0.1 1 10 100 Forward Voltage---VF(V) Reverse Voltage---VR(V) R everse Leakage Current vs Reverse Voltage 100 Reverse Leakage Current---IR(A) 10 Tj=100℃ 1 0.1 Tj=25℃ 0.01 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage---(%) CSOD400XSF CYStek Product Specification CYStech Electronics Corp. SOD-123 Dimension Spec. No. : C327SF Issued Date : 2003.05.16 Revised Date : Page No. : 3/3 A C Marking Code: Device 4001 Code A1 Device 4005 Code A5 4002 A2 4006 A6 4003 A3 4007 A7 4004 A4 B D SOD-123 Plastic Surface Mounted Package CYStek Package Code: SF E G F *:Typical DIM A B C D Inches Min. Max. 0.146 0.161 0.055 0.071 0.012(typ) 0.094 0.110 Millimeters Min. Max. 3.7 4.1 1.4 1.8 0.3(typ) 2.4 2.8 DIM E F G - Inches Min. Max. 0.055 0.063 0.035(typ) 0.035(typ) - Millimeters Min. Max. 1.4 1.6 0.9(typ) 0.9(typ) - Notes : 1.Controlling dimension : millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material : • Lead : 42 Alloy ; solder plating • Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. CSOD400XSF CYStek Product Specification