PL1084-5.0

CYStech Electronics Corp. 5A Low Dropout Positive Voltage Regulator Spec. No. : C512E3 Issued Date : 2003.03.25 Revised Date : Page No. : 1/4 PL1084-XXXE3 Features Dropout Voltage 1.3V at 5A Output Current. Fast Transient Response. Extremely Tight Line and Load Regulation. Current Limiting and Thermal Protection. Adjustable Output Voltage or Fixed 1.5V, 2.5V,2.85V,3.0V,3.3V,3.5V,5.0V. Standard 3-Pin Power Packages. TO-220AB Description The PL1084-XXXE3 is a low dropout three terminal regulator with 5A output current capability. The output voltage is adjustable with the use of a resistor divider or fixed 1.5V, 2.5V, 2.85V, 3.0V, 3.3V, 3.5V and 5.0V. Dropout voltage is guaranteed to be at maximum of 1.2V with the maximum output current. Its low dropout voltage and fast transient response make it ideal for low voltage microprocessor applications. Current limit and thermal protection provide protection against any overload condition that would create excessive junction temperatures. Applications Mother Board I/O Power Supplies. Microprocessor Power Supplies. High Current Regulator. Post Regulator for Switching Supply. Typical Application Circuit Vin=5V 3 Vout=3.3V 2 PL1084-Adj VREF 1 C1 10μF ADJ R1 125Ω 1% R2 205Ω 1% C2 10μF Adjustable Voltage Regulator Vin=5V 3 2 Vout=3.3V PL1084-3.3 C1 10μF 1 C2 10μF Fixed Voltage Regulator PL1084E3 CYStek Product Specification CYStech Electronics Corp. Ordering Information Device PL1084-AdjE3 PL1084-1.5E3 PL1084-2.5E3 PL1084-2.85E3 PL1084-3.0E3 PL1084-3.3E3 PL1084-3.5E3 PL1084-5.0E3 Output Voltage Adjustable 1.5V 2.5V 2.85V 3.0V 3.3V 3.5V 5.0V Spec. No. : C512E3 Issued Date : 2003.03.25 Revised Date : Page No. : 2/4 Absolute Maximum Ratings VIN pin to ADJ/GND pin ……………………………………………………………………………………………….7V Operating Junction Temperature Range ………………………………………………………………………0°C~ 125°C Storage Temperature Range………………………………………………………………………………..- 65°C ~ 150°C Thermal Resistance Junction to Case ……………………………………………………………………………… 3°C /W Thermal Resistance Junction to Ambient (Assume no ambient airflow, no heatsink) …………………………… 50°C /W Lead Temperature (Soldering) 10 sec. ……………………………………………………………………………….260°C Electrical Characteristics (Vin=5V, Io=10mA,Tj=25℃, unless otherwise noted) Symbol VREF Parameter Reference Voltage Output Voltage Conditions Tj=25°C PL1084-1.5 PL1084-2.5 PL1084-2.85 PL1084-3.0 PL1084-3.3 PL1084-3.5 PL1084-5.0 Adj: 2.65V≤Vin≤7V Fix: Vout+1.4V≤Vin≤7V 10mA≤Io≤5A Vin-Vout=3V Min 1.238 1.48 2.47 2.82 2.97 3.26 3.46 4.95 5.5 60 Typ 1.250 1.50 2.50 2.85 3.00 3.30 3.50 5.00 0.015 6.8 55 0.2 0.5 5 0.003 72 1.2 Max 1.262 1.52 2.53 2.88 3.03 3.34 3.54 5.05 0.2 0.4 120 5 10 1.3 Units V Vo V ∆Vo ∆Vo Is IAdj ∆IAdj Ts IL VN RR VD Line Regulation % % A μA μA % mA % dB V Load Regulation Current Limit Adjust Pin Current 2.65V≤Vin≤7V Adjust Pin Current 2.65V≤Vin≤7V, 0°C≤Tj≤125°C Change Temperature Stability Io=0.5A, 0°C≤Tj≤125°C Minimum Load Current 0°C≤Tj≤125°C RMS Output Noise(% of 10Hz≤f≤10KHz Vout) Vin-Vout=3V, f=120Hz, Ripple Rejection Ratio Cout=25μF Dropout Voltage ∆Vout,∆VREF=1%, 10mA≤Io≤5A 0°C≤Tj≤125°C PL1084E3 CYStek Product Specification CYStech Electronics Corp. Block Diagram Spec. No. : C512E3 Issued Date : 2003.03.25 Revised Date : Page No. : 3/4 VIN Current Amp. VREF 1.25V Thermal Limit Current Limit VOUT 55μA For fixed voltage device ADJ GND PL1084E3 CYStek Product Specification CYStech Electronics Corp. TO-220AB Dimension Spec. No. : C512E3 Issued Date : 2003.03.25 Revised Date : Page No. : 4/4 A D B E C Marking: 1084-XXX H I G 4 P M 3 2 1 N Style: Pin 1.Adj/Gnd 2.Vout3.Vin 4 Vout K O 3-Lead TO-220AB Plastic Package CYStek Package Code: E3 *: Typical DIM A B C D E G H Inches Min. Max. 0.2197 0.2949 0.3299 0.3504 0.1732 0.185 0.0453 0.0547 0.0138 0.0236 0.3803 0.4047 *0.6398 Millimeters Min. Max. 5.58 7.49 8.38 8.90 4.40 4.70 1.15 1.39 0.35 0.60 9.66 10.28 *16.25 DIM I K M N O P Inches Min. Max. *0.1508 0.0295 0.0374 0.0449 0.0551 *0.1000 0.5000 0.5618 0.5701 0.6248 Millimeters Min. Max. *3.83 0.75 0.95 1.14 1.40 *2.54 12.70 14.27 14.48 15.87 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: 42 Alloy ; solder plating • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. PL1084E3 CYStek Product Specification