PL7806XE3

CYStech Electronics Corp. 3-TERMINAL POSITIVE VOLTAGE REGULATOR Spec. No. : C522E3 Issued Date : 2003.04.02 Revised Date : Page No. : 1/3 PL7806XE3 Description The PL7806XE3 series of three-terminal positive regulators are available in the TO-220AB package. These regulators can provide TO-220AB local on -card regulation, eliminating the distribution problems associated with single point regulation. Each employs internal current limiting, thermal shutdown and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. PL7806XE3 is characterized for operation from 0°C to +125°C, and if operating temperature is always high, please refer to the power dissipation curve. Absolute Maximum Ratings (Ta=25°C) • Input Voltage ....................................................................................................................... 35 V • Total Power Dissipation .................................................................................... Internally limited • Operating Temperature Range .......................................................................... 0 °C to +125 °C • Maximum Junction Temperature ..................................................................................... 125 °C • Storage Temperature Range .......................................................................... -55 °C to +150 °C • Lead Temperature (Soldering 10S) ................................................................................. 230 °C Typical Application Schematic Diagram Input Vin 1 PL7806 3 Vout 3.4K 6.3V 10K 1K 200 200 0.3 2K C1 2 C2 30K Output VREF 26 1.9K 20pF 4K Note: C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop. 26 4K 1.2 12.1K 1K GND PL7806E3 CYStek Product Specification CYStech Electronics Corp. Electrical Characteristics Vin=11V, Io=500mA, 0°C≤Tj≤125°C (unless otherwise noted) Spec. No. : C522E3 Issued Date : 2003.04.02 Revised Date : Page No. : 2/3 Symbol Vo ∆Vo ∆Vo IQ ∆IQ Vn RR VD Isc Ipk ∆Vo / ∆T Symbol Vo ∆Vo ∆Vo IQ ∆IQ Vn RR VD Isc Ipk ∆Vo / ∆T Parameter Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Average Tc of Vout Parameter Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Average Tc of Vout Conditions Tj=25°C PD≤15W, 5mA≤Io≤1A Tj=25°C, 8V≤Vin≤21V Tj=25°C, 9V≤Vin≤21V 5mA≤Io≤1.5A 250mA≤Io≤750mA Io≤1A, Tj=25°C 5mA≤Io≤1A 9V≤Vin≤25V Ta=25°C, 10Hz≤f≤100KHz 9V≤Vin≤19V, f=120Hz Tj=25°C, Io=1A Tj=25°C Tj=25°C 0°C≤Tj≤+125°C, Io=5mA Conditions Tj=25°C PD≤15W, 5mA≤Io≤1A Tj=25°C, 8V≤Vin≤21V Tj=25°C, 9V≤Vin≤21V 5mA≤Io≤1.5A 250mA≤Io≤750mA Io≤1A, Tj=25°C 5mA≤Io≤1A 9V≤Vin≤25V Ta=25°C, 10Hz≤f≤100KHz 9V≤Vin≤19V, f=120Hz Tj=25°C, Io=1A Tj=25°C Tj=25°C 0°C≤Tj≤+125°C, Io=5mA PL7806A Min Typ Max 5.82 6 6.18 5.82 6 6.18 4 60 1.6 25 100 50 5.5 8 0.5 1.3 200 68 2 1.5 1.7 -0.8 PL7806B Min Typ Max 5.75 6 6.25 5.75 6 6.25 5 120 2 60 120 60 5.5 8 0.5 1.3 300 62 73 2.5 1.5 1.7 -0.8 - Units V mV mV mA mA uV dB V A A mV/°C Units V mV mV mA mA uV dB V A A mV/°C PL7806E3 CYStek Product Specification CYStech Electronics Corp. TO-220AB Dimension Marking: A D B E C Spec. No. : C522E3 Issued Date : 2003.04.02 Revised Date : Page No. : 3/3 7806 H I G 4 P M 3 2 1 N K Style: Pin 1.Vin 2.Ground 3.Vout 4.Ground 3-Lead TO-220AB Plastic Package CYStek Package Code: E3 O *: Typical DIM A B C D E G H Inches Min. Max. 0.2197 0.2949 0.3299 0.3504 0.1732 0.185 0.0453 0.0547 0.0138 0.0236 0.3803 0.4047 *0.6398 Millimeters Min. Max. 5.58 7.49 8.38 8.90 4.40 4.70 1.15 1.39 0.35 0.60 9.66 10.28 *16.25 DIM I K M N O P Inches Min. Max. *0.1508 0.0295 0.0374 0.0449 0.0551 *0.1000 0.5000 0.5618 0.5701 0.6248 Millimeters Min. Max. *3.83 0.75 0.95 1.14 1.40 *2.54 12.70 14.27 14.48 15.87 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: 42 Alloy ; solder plating • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. PL7806E3 CYStek Product Specification