CAMH9126

MODEL NUMBER CAMH9126 FEATURES • L-Band Op. Freq. • 52 dB Gain • 61 dBm Pout • 45% Efficiency L-Band Power Amplifier AMP A A .250-.252 DIA. x.40 MIN DEEP INCLUDING SUPPORT FLANGE 10.50 MAX 10.38 3x 1.125 1.000 4.000 CAUTION BeO CONTAINS BERYLLIUM OXIDE DO NOT ALTER, CUT, OR GRIND .250-.252 x .38 SLOT .40 MIN DEEP INCLUDING SUPPORT FLANGE. .086-56 UNC-2B 3 PLS. 2x .650 7.000 1.000 8.000 VIEW A-A .75 TOP .12 SIDE J1 Connector 2x 1.000 RF OUT J3 SN DAICO INDUSTRIES, INC. MADE IN U.S.A. CAMH9126 HIGH POWER AMPLIFIER 10.00 +41.5V +15V A3 RF IN J1 J2 2.00 2x .65 .75 .60 DC 2x .50 .44 Power Amplifier 2.88 6.40 10.880 FRONT 2.40 A GND (SHLD) B MODIN + C MODIN D N/C E PABIT + F PABIT G PAOT + H PAOT - J N/C K N/C L N/C M GND(SHLD) N N/C P ±15VRT R ±15VRT S +15V T N/C U +41.5VRT V +41.5VRT W +41.5VRT X +41.5V Y +41.5V Z +41.5V G U ARAN TEED PERFO RMA N CE Parameter J2 RF IN J3 RF OUT Min Typ Max Units 1400 52 61 +10 1.4:1 1.4:1 435 400 35 38 50 120 5.3 0.45 +25 63 +18 +20 1.5:1 1.5:1 600 600 MHz dB dBm dBm Conditions PRF 3.57 KHz PW = 15 µSec Operating Frequency 1215 Gain 50 Peak Power Output 60 RF Power In: Operate +7 No Damage SENSOR/LOGIC VSWR J1 CONNECTOR In Out 200 200 30 30 80 A,M B C D,J,K L,N,T E F G H P,R U,V,W S X,Y,Z Pulse Delay On Puse Delay Off Harmonics II III Impedance Transition (Rise/Fall) Time DC Current Operating Temperature N/C = NO CONNECT -46 500 7.5 0.7 +52 nSec nSec dBc dBc OHMS µSec AMP At +41.5 VDC AMP At +15 VDC °C TA GND MODIN + MODIN - N/C +15VRT +41.5VRT +15V PAOT + PABIT + DAICO Industries PABIT - PAOT - +41.5V 310.507.3242 • FAX 310.507.5701 • www.daico.com 29