5962-8766001PA

SCOPE: DUAL-POWER MOSFET DRIVER Device Type 01 Generic Number ICL7667M(x)/883B SMD Number 5962-87660 Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter SMD MAXIM G TV P JA Mil-Std-1835 MACY1-X8 GDIP1-T8 or CDIP2-T8 Case Outline 8 LEAD CAN 8 LEAD CERDIP Package Code TO99 J8 Absolute Maximum Ratings VDD to GND ......................................................................................................................…. 18V Input Voltage ................................................................................ (VDD +0.3V) to ( GND -0.3V) Lead Temperature (soldering, 10 seconds) ........................................................................... +300°C Storage Temperature .............................................................................................. -65°C to +150°C Continuous Power Dissipation .........................................................................………... TA=+70°C 8 lead CERDIP(derate 8.0mW/°C above +70°C) .................................................………... 640mW 8 lead CAN (derate 6.7mW/°C above +70°C) ....................................................……….... 533mW Junction Temperature TJ .................................................................................………….. +150°C Thermal Resistance, Junction to Case, ΘJC: Case Outline 8 lead CERDIP...............................................................……….... 55°C/W Case Outline 8 lead CAN...................................................................………..... 45°C/W Thermal Resistance, Junction to Ambient, ΘJA: Case Outline 8 lead CERDIP.............................................................………... 125°C/W Case Outline 8 lead CAN .................................................................……….... 150°C/W Recommended Operating Conditions. Ambient Operating Range (TA) .........................................................……….. -55°C to +125°C VDD ..............................................................................................………..... +4.5Vdc to 15.5Vdc Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ---------------------------- Electrical Characteristics of ICL7667Mxx/883B for SMD 5962-87660 19-0457 Page 2 of Rev. B 5 TABLE 1. ELECTRICAL TESTS TEST SWITCH Logic 1 Input Voltage Symbol VIH CONDITIONS -55 °C