5962-9204201MEA

SCOPE: 8-CHANNEL/DUAL 4-CHANNEL CMOS, ANALOG SWITCHES Device Type 01 02 Generic Number DG408A(x)/883B DG409A(x)/883B SMD Number 5962-9204201 5962-9204202 Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter Maxim SMD K E L X Z 2 Mil-Std-1835 GDIP1-T16 or CDIP2-T16 CDFP3-F16 CQCC1-N20 Case Outline Package Code 16 LEAD CERDIP 16 LEAD FLATPACK 20-Pin Ceramic LCC J16 F16 L20 Absolute Maximum Ratings Voltage Referenced to VV+ to V- .............................................................................................................................. 44V V- to GND ......................................................................................................................... 25V Digital Inputs Overvoltage Range 1/ ..................................................... .(V - -2V) to (V+ +2V) or 20mA whichever occurs first. Continuous Current, Any terminal except S or D ........................................................... 30mA Continuous Current, S or D ............................................................................................. 20mA Current, S or D (Pulsed at 1ms, 10% duty cycle max) .................................................... 40mA Lead Temperature (soldering, 10 seconds) ........................................................................ +300°C Storage Temperature ........................................................................................... -65°C to +150°C Continuous Power Dissipation ........................................................................…….... TA=+70°C 16 lead CERDIP(derate 10.0mW/°C above +70°C) ..............................................…….. 800mW 16 lead FLATPACK(derate 6.1mW/°C above +70°C) ...........................................…….. 485mW 20 lead LCC(derate 9.1mW/°C above +70°C) .......................................................……... 727mW Junction Temperature TJ ....................................................................................…….... +150°C Thermal Resistance, Junction to Case, ΘJC: Case Outline 16 lead CERDIP................................................................…….... 50°C/W Case Outline 16 lead FLATPACK .........................................................……... 65°C/W Case Outline 20 lead LCC .....................................................................……... 55°C/W Thermal Resistance, Junction to Ambient, ΘJA: Case Outline 16 lead CERDIP.............................................................…….... 100°C/W Case Outline 16 lead FLATPACK .......................................................……... 165°C/W Case Outline 20 lead LCC ....................................................................……... 110°C/W Recommended Operating Conditions Ambient Operating Range (TA) ......................................................………..... -55°C to +125°C Positive Supply Voltage (V+) ..............................................................................……….... +15V Negative Supply Voltage (V-) ...............................................................................………... -15V 1/ Signals on S, D or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ---------------------------- Electrical Characteristics of DG408A/409A/883B for SMD 5962-92042 19-0368 Page 2 of Rev. B 6 TABLE 1. ELECTRICAL TESTS: TEST SWITCH Analog-Signal Range Drain-Source ON Resistance rDS(ON) Matching Between Channels Symbol CONDITIONS -55 °C