73S1209F / 73S1210F Product Brief
Turnkey Smart Card Reader ICs
with Generic Serial Host interface, optional
PINpad, I/Os and power management features
Key Applications
SIM Readers in wireless devices (WiMAX,
GPRS, GSM etc)
Point-of-Sales terminals
• Immediate compliance with EMV4.1 Level 1
Payphones
Vending and ticketing machines
Audio/Video:
• Conditional Access and payment slots in
digital STB, PVR and Integrated DTVs
General purpose smart card and SIM readers
Key Advantages
Self-contained smart card reader IC
Market’s lowest cost
Tiny QFN 7x7 or 8x8mm package with very
few external passive components
Low power
Wide choice of power supply options
Turnkey firmware available from Teridian (no
3rd party involved…):
• Compliant with PC/SC, ISO7816 and
EMV4.1 specifications
• Features a Power Down mode
accessible form the host
• Supports Plug & Play over serial interface
• Windows TM XP driver available (*)
• Windows TM CE / Mobile driver available (*)
• Drivers for Linux and other OS: Upon request
The Teridian 73S1209F and 73S1210F ICs are state-of-the-art, self-contained smart card reader Integrated
Circuits that will find their places everywhere a smart card reader function – single or multi-slots – needs to be
implemented, particularly when development time and investment must be minimized. These ICs take care of
both electrical and protocol layers to communicate with smart cards or SIMs. They are built around the Teridian
80515 CPU core, and can run either Teridian turnkey embedded firmware, or alternatively customer’s code,
that can be developed and loaded directly into the on-chip 32KB Flash, or delivered by Teridian as a dedicated
masked-ROM version.
Implementation of a smart card reader can be a time-consuming task, requiring in-depth smart card experience, especially when it comes to implementing the software protocol layer in compliance with applicable
standards like EMV or NDS. The Teridian 73S1209F and 73S1210F ICs, used in conjunction with Teridian
ready-to-use PC/SC firmware and optional host drivers will help dramatically simplify the design and shorten
development and certification timescales.
Whenever compliance with ISO-7816, EMV 4.1, Windows WHQL, NDS(*) or with GSM11-11 standards is
required, the Teridian 73S1209F and 73S1210F ICs are the right solutions. The chips can immediately connect
to any host controller through a serial link. While the Teridian IC takes care of the smart card protocol layer,
the host controller is freed up from the smart card timing constraints, and it only has to exchange simple PC/SC
commands through the serial link to control the smart card reader function. Teridian ICs can be connected with
external 73S8010x ICs to extend the number of smart card slots (for instance in the case additional SAM cards
must be supported like in Point-of-Sales terminals).
Teridian 73S1209F and 73S1210F ICs differ from their power supply voltage ranges and power management options.
(*) 73S1209F only – Formal approval pending.
Chip and PIN
Or for custom developments:
• A complete set of ISO-7816, EMV4.1 & PC/
SC libraries are available
(*) Contact Teridian for availability and conditions
73S1209F – 73S1210F Product Brief
73S1209F-73S1210F Block Diagram
JTAG-like Interface
Analog DC input
Main Battery Voltage
Source 4.0V to 6.5V
Powerful & Cost-effective
In-Circuit-Emulation &
programming
Voltage detection,battery supervision...
73S1210F Power management Circuitry:
VPC
VBUS
VBAT
VP
TBUS0
TBUS1
TBUS2
TBUS3
RXTX
ERST
ISBR
TCLK
ANA_IN
VDD
VPD
SEC
TEST
GND
Prevent from unauthorized intrusion
RESET
10µF
Security fuses
USB Bus-power
4.4V to 5.5V
LIN
ICE INTERFACE
PLL
and
TIMEBASES
Main
OSCILLATOR
Memories:
OCDSI
• 32 32KB Flash KB / ROM
• 256 B Scratchpad IRAM
• 2 KB RAM ( user XRAM )
FLASH/ROM
PROGRAM
MEMORY
32KB
High performance 80515 core:
• 1 clock cycle / instruction
• Up to 24MIPS available: As powerful as an ARM7
• Instruction set compatible with industry-standard 8051/8052
Allows encryption of PIN, encryption of dataexchange over the USB, etc.
Can be set independently as inputs, outputs,
edge or level sensitive, interrupt
LED outputs
Current programmable
73S1210F Only
73S1209F Only
Available in QFN68 Flavors only
RAM_
SFR_
CONTROL
TIMER_0_
1
SCRATCH
IRAM
256B
80515
CORE
ROW0
ROW1
ROW2
ROW3
ROW4
ROW5
COL0
COL1
COL2
COL3
COL4
USR0
USR1
USR2
USR3
USR4
USR5
USR6
USR7
USR8
DATA
XRAM
2KB
KEYPAD
INTERFACE
PMU
WATCHDOG
TIMER
PORTS
ISR
SERIAL_1
ON/OFF
VPC
VDD
RST
SMART
CARD
ISO7816
INTERFACE
73S1209F Power Regulation:
• VCC card generation from LDO
• Digital core requires its own VDD supply
CLK
Power Supply:
73S1209F: dual voltage needed: 2.7V to 3.6V and 4.75V to 6.5V
73S1210F: Single voltage needed: As wide as 2.7V 6.5V
IO
AUX1
GND
AUX2
PRES
PRES
EXTERNAL
SMART
CARD
INTERFACE
SCLK
Smart Cards:
• Built-in ISO 7816-3 / EMV 4.1 electrical interface
• ISO 7816 UART (supports up to 115kbps speed) with 2 dedicated FIFOs
• l l2C Interface to drive external 73S8010X interfaces
SIO
SERIAL_0
I 2C
MASTER
INT.
SCL
SDA
PERIPHERAL
INTERFACE and
SFR LOGIC
Packages
QFN68 8x8mm
QFN44 7x7mm
(72S1209F only)
INT2
INT3
USR(7:0)
DRIVERS
LED
DRIVERS
Serial
GND
8 (9 in 73S1209F QFN68)
General purpose I/Os
CONTROL
UNIT
ALU
LED1
Hardware scan & Debounce
Keypress interrupt
MEMORY_
CONTROL
FLASH
INTERFACE
LED0
5x6 PINpad interface
VDD
• DC-DC Converter
• Multiple power supply inputs with internal switches
• Supports USB Bus-Power
• Input for an ON/OFF main system switch to ground
• Overall power consumption
很抱歉,暂时无法提供与“73S1210F-44M/F/PD”相匹配的价格&库存,您可以联系我们找货
免费人工找货