DG509ACWE

19-0028; Rev 3; 9/01 Monolithic CMOS Analog Multiplexers Maxim’s DG508A and DG509A are monolithic CMOS analog multiplexers (muxes): the DG508A is a single 8-channel (1-of-8) mux, and the DG509A is a differential 4-channel (2-of-8) mux. Both devices guarantee break-before-make switching. Maxim guarantees these muxes will not latch up if the power supplies are turned off with the input signals still present. Maxim also guarantees continuous operation when these devices are powered by supplies ranging from ±4.5V to ±18V. The DG508A/DG509A are plug-in upgrades for the industry-standard DG08A/DG509A, respectively. Maxim’s parts have lower on-resistance, faster enable switching times, and significantly lower leakage currents. The DG508A/ DG509A also consume significantly lower power, making them ideal for portable equipment. Applications Features ♦ Improved Second Source ♦ Operate from ±4.5V to ±18V Supplies ♦ Symmetrical, Bidirectional Operation ♦ Logic and Enable Inputs, TTL and CMOS Compatible ♦ Latchup-Proof Construction ♦ Monolithic, Low-Power CMOS Design Ordering Information PART TEMP RANGE PIN-PACKAGE DG508ACJ 0°C to +70°C 16 Plastic DIP DG508ACWE 0°C to +70°C 16 Wide SO DG508AC/D 0°C to +70°C Dice* DG508ABK -20°C to +85°C 16 CERDIP DG508ADJ -40°C to +85°C 16 Plastic DIP DG508ADY -40°C to +85°C 16 Narrow SO Control Systems DG508AEGE -40°C to +85°C 16 QFN Data Logging Systems DG508AEWE -40°C to +85°C 16 Wide SO Aircraft Heads-Up Displays DG508AAK -55°C to +125°C 16 CERDIP Ordering Information continued at end of data sheet. *Contact factory for dice specifications. Data-Acquisition Systems Signal Routing Pin Configurations Typical Operating Circuits TOP VIEW -15V V+ GND VS1 S2 S3 DG508A S4 D S5 S6 S7 S8 A0 A1 A2 EN ANALOG INPUT (OUTPUTS) +15V V+ CLOCK IN N.C. BIN -15V A0 1 16 A1 EN 2 15 A2 V- 3 S1 4 ANALOG OUTPUT (INPUTS) 14 GND DG508A 13 V+ S2 5 12 S5 S3 6 11 S6 S4 7 10 S7 D 8 9 S8 QB QC QD AIN Q r01 r02 GND A N.C. A0 1 16 A1 EN 2 15 GND S1A 4 +15V ENABLE IN (MUX ON/OFF CONTROL) 8-CHANNEL SEQUENTIAL MUX/DEMUX Typical Operating Circuits continued at end of data sheet. 14 V+ V- 3 DG509A 13 S1B S2A 5 12 S2B S3A 6 11 S3B S4A 7 10 S4B 9 DA 8 DB DIP/SO Pin Configurations continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 DG508A/DG509A General Description DG508A/DG509A Monolithic CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ ....................................................................................+44V GND ................................................................................ +25V Digital Inputs, VS and VD (Note 1)..................-2V to (V+ + 2V) or 20mA, whichever occurs first Current (any terminal, except S or D) .................................30mA Continuous Current, S or D .................................................20mA Peak Current, S or D (pulsed at 1ms, 10% duty cycle max) ..40mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 10.53mW/°C above +70°C) ..........842mW QFN (derate 19.2mW/°C above +70°C) ....................1538mW Narrow SO (derate 8.70mWI°C above +70°C) ............696mW Wide SO (derate 9.52mW/°C above +70°C)................762mW CERDIP (derate 10.00mW/°C above +70°C) ...............800mW Operating Temperature Ranges: DG50_ACJ/CWE/CGE ........................................0°C to +70°C DG50_ABK ......................................................-20°C to +85°C DGS0_ADJ/DY/EWE/EGE ................................-40°C to +85°C DG50_AAK ....................................................-55°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Note 1: Signals on S_, D_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V+ = 15V, V- = -15V, GND = OV, TA = +25°C, unless otherwise noted.) PARAMETER SYMBOL DG508AA DG508AD/E/B/C DG509AA DG509AD/E/B/C MIN TYP MAX MIN TYP MAX CONDITIONS UNITS SWITCH Analog Signal Range Drain-Source OnResistance Greatest Change in Drain-Source OnResistance Between Channels Source OffLeakage Current Drain Off- DG508A Leakage Current DG509A Drain OnLeakage Current 2 VANALOG RDS(ON) ∆RDS(ON) Sequence each switch on, VAL = 0.8V, VAH = 2.4V (Note 4) VD = 10V, IS = -200µA 170 VD = 10V, IS = -200µA 130 RDS(ON) -15 300 +15 170 V 350 Ω R max − RDS(ON) min  ∆RDS(ON) = DS(ON) ,  +15  300 130 6 350 6 % -10V ≥ VS ≥ 10V IS(OFF) ID(OFF) DG508A ID(ON) DG509A -15 VEN = 0V VEN = 0V VS = 10V, VD = -10V VS = -10V, VD = 10V VD = 10V, VS = -10V VD = 10V, VS = -10V VD = 10V, VS = -10V VD = -10V, VS = 10V Sequence each VS(all) = VD = 10V switch on, VS(all) = VD = -10V VAL = 0.8V VS(all) = VD = 10V VAH = 2.4V (Note 2) VS(all) = VD = -10V 0.002 -0.5 -2 -2 -2 2 0.015 2 -5 2 -5 -0.03 -0.015 0.002 -1 0.01 -0.015 0.005 -0.008 0.007 -2 0.5 -0.005 -5 2 0.01 -0.015 0.005 -0.008 5 0.015 5 5 nA nA -0.03 0.007 -5 1 -0.005 -0.015 _______________________________________________________________________________________ 5 nA Monolithic CMOS Analog Multiplexers DG508A/DG509A ELECTRICAL CHARACTERISTICS (continued) (V+ = 15V, V- = -15V, GND = OV, TA = +25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS DG508AA DG509AA MIN TYP MAX DG508AD/E/B/C DG509AD/E/B/C MIN TYP MAX UNITS LOGIC INPUT VA = 24V -10 -0.002 10 -0.002 Logic Input Current, Input Voltage High IAH Logic Input Current, Input Voltage Low IAL All VA = 0V ttransition Figure 1 0.6 tOPEN Figure 3 0.2 Enable Turn-On Time tON(EN) Figure 2 0.4 1.0 0.4 1.5 µs Enable Turn-Off Time tOFF(EN) Figure 2 0.2 0.7 0.2 1.0 µs VEN = 0V, RL = 1kΩ, CL = l5pF, VS = 7VRMS f = 500kHz (Note 3) 68 DYNAMIC Multiplexer Switching Time Break-Before-Make Interval Off-Isolation OIRR Source Off-Capacitance IDG508A Drain OffCapacitance DGS09A SUPPLY Positive Supply Current CS(OFF) CD(OFF) VA = 15V 0.006 10 0.006 VEN = 2.4V -10 -0.002 10 -0.002 VEN = 0V -10 -0.002 -10 -0.002 VS = 0V, VEN = 0V, f = 140kHz VS = 0V, VEN = 0V, f = 140kHz I+ VEN = 2.4V, all VA = 0V or 2.4V Negative Supply Current I- VEN = 2.4V, all VA = 0V or 2.4V Positive Supply Current in Standby I+ VEN = 0V, all VA = 0V or 2.4V Negative Supply Current in Standby I- VEN = 0V, all VA = 0V or 2.4V -0.1 Power-Supply Range for Continuous Operation V-, V+ (Notes 4, 5) ±4.5 0.6 12 12 0.02 -0.1 0.2 -0.01 ±18.0 ±4.5 pF 0.2 -0.01 0.02 -0.1 µs pF 5 0.2 µs dB 25 0.02 1. 0 68 5 -0.01 µA µA 0.2 25 0.02 -0.1 1. 0 10 mA mA 0.2 -0.01 mA mA ±18.0 V _______________________________________________________________________________________ 3 DG508A/DG509A Monolithic CMOS Analog Multiplexers ELECTRICAL CHARACTERISTICS (V+ = 15V, GND = 0V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS DG508AA DG509AA MIN TYP MAX DG508AD/E/B/C DG509AD/E/B/C MIN TYP MAX -15 -15 UNITS SWITCH Analog Signal Range Drain-Source OnResistance Source Off-Leakage Current Drain OffLeakage Current VANALOG RDS(ON) IS(OFF) Sequence each switch on, VAL = 0.8V, VAH = 2.4V VEN = 0V ID(OFF) VEN = 0V DG509A 400 450 VD = 10V, IS = -200µA 400 450 VS = -10V, VD = -10V VD = -10V, VS = -10V +50 -50 +200 -100 ID(ON) DG509A nA +100 -200 +200 VS(all) = VD = 10V Drain OnLeakage Current +50 -50 -200 VD = 10V, VS = -10V Sequence each switch on, VS(all) = VD = -10V VAL = 0.8V, VS(all) = VD = 10V VAH = 2.4V (Note 2) VS(all) = VD = -10V V Ω VS = 10V, VD = -10V VD = -10V, VS = -10V DG508A +15 VD = 10V, IS = -200µA VD = 10V, VS = -10V DG508A +15 +100 nA -100 +200 -200 +100 -100 nA +100 -100 +100 -100 LOGIC INPUT Logic Input Current, Input Voltage High IAH Logic Input Current, Input Voltage Low IAL VA = 2.4V -30 VA = 15V All VA = 0V -30 +30 +30 VEN = 2.4V -30 -30 VEN = 0V -30 -30 µA µA Note 2: ID(ON) is leakage from driver into on switch. Note 3: Off-isolation = 20log IVSI IVDI VS = input to off switch, VD = output due to VS. Note 4: Electrical characteristics (such as on-resistance) change when power supplies other than ±15V are used. Note 5: For designs requiring single 5V or dual ±5V operation, refer to Maxim’s improved MAX338 and MAX339. Minimum operating voltage for DG508ADY and DG509ADY is ±9V. 4 _______________________________________________________________________________________ Monolithic CMOS Analog Multiplexers PIN DG508A DIP/SO QFN DG509A DIP/SO QFN NAME FUNCTION 1, 15, 16 15, 14, 13 — — A0, A2, A1 — — 1, 16 15, 14 A0, A1 Address Input 2 16 2 16 EN Enable Negative-Supply Voltage Input Address Input 3 1 3 1 V- 4–7 2–5 — — S1–S4 Analog Inputs, Bidirectional — — 4–7 2–5 S1A–S4A Analog Inputs, Bidirectional 8 6 — — D — — 8, 9 6, 7 DA, DB Analog Outputs, Bidirectional Analog Outputs, Bidirectional 9–12 7–10 — — S8–S5 Analog Inputs, Bidirectional — — 10–13 8–11 S4B–S1B 13 11 14 12 V+ 14 12 15 13 GND Analog Inputs, Bidirectional Positive-Supply Voltage Input Ground Functional Diagrams V+ V- GND V+ S1 S1A S2 S2A S3 S3A S4 D S1B S6 S2B S7 S3B S8 S4B A2 A1 A0 GND DA S4A S5 DG508A CMOS DECODE LOGIC V- DB DG509A CMOS DECODE LOGIC EN DG508A 8-CHANNEL SINGLE ENDED MULTIPLEXER A1 A0 EN DG509A DIFFERENTIAL 4-CHANNEL MULTIPLEXER _______________________________________________________________________________________ 5 DG508A/DG509A Pin Description DG508A/DG509A Monolithic CMOS Analog Multiplexers +2.4V +2.4V +15V V+ EN S1 +15V V+ ±10V EN S1 ±10V DG509A S1A–S4A, DA, S2B, S3B S2–S7 DG508A A0 S8 A1 A2 LOGIC INPUT D GND V1MΩ 50Ω S4B A0 SWITCH OUTPUT VD 35pF A1 LOGIC INPUT DB V- GND 1MΩ 50Ω SWITCH OUTPUT VDS 35pF -15V -15V Figure 1a. Switching-Time Test Circuit Figure 1b. Switching-Time Test Circuit +15V +15V V+ EN V+ S1 -5V EN S1B -5V DG509A S1A–S4A, DA, S2B, S3B S2–S7 DG508A A0 A0 A1 A2 LOGIC INPUT D GND V1kΩ 50Ω 35pF -15V Figure 2a. DG509A Enable-Time Test Circuit 6 SWITCH OUTPUT VD A1 LOGIC INPUT DB GND V1kΩ 50Ω SWITCH OUTPUT VDS 35pF -15V Figure 2b. DG509A Enable-Time Test Circuit _______________________________________________________________________________________ Monolithic CMOS Analog Multiplexers LOGIC INPUT tr < 20ns tf < 20ns +15V 3V 50% 0 EN VS1 DG508A DG509A LOGIC INPUT DG508A/DG509A +2.4V A0, A1, (A2) GND ALL S AND DA SWITCH OUTPUT VD (SEE FIG. 1) TRANSITION TIME +5V SWITCH OUTPUT VD DB, D V- 0.8VS1 0 0.8VS8 VS8 ttransition S1ON S8ON 1kΩ 50Ω ttransition tON (EN) 35pF -15V tOFF (EN) 0 SWITCH 0.1V0 OUTPUT VD (SEE FIG. 2) TENABLE t(ON) t(OFF) TIME 0.9V0 V0 VS Figure 3. Break-Before-Make Test Circuit SWITCH OUTPUT VD (SEE FIG. 3) OPEN TIME (B.B.M INTERVAL) VS 50% 0V topen Figure 4. Timing Diagram for Figures 1, 2, and 3 Table 1 b. DG509A Truth Table Table 1a. DG508A Truth Table A2 A1 A0 EN ON SWITCH A1 A0 EN ON SWITCH X X X 0 NONE X X 0 NONE 0 0 0 1 1 0 0 1 1 0 0 1 1 2 0 1 1 2 0 1 0 1 3 1 0 1 3 0 1 1 1 4 1 1 1 4 1 0 0 1 5 X = Don’t care. 1 0 1 1 6 1 1 0 1 7 1 1 1 1 8 X = Don’t care. _______________________________________________________________________________________ 7 Monolithic CMOS Analog Multiplexers DG508A/DG509A Typical Operating Circuits (continued) -15V -15V V+ GND VS1A S2A DA S3A S4A DG509A S1B DB S2B S3B S4B A0 A1 EN DIFFERENTIAL ANALOG INPUTS (OUTPUTS) DIFFERENTIAL ANALOG OUTPUTS (INPUTS) +15V Ordering Information (continued) PART TEMP RANGE PIN-PACKAGE DG509ACJ 0°C to +70°C 16 Plastic DIP DG509ACWE 0°C to +70°C 16 Wide SO DG509AC/D 0°C to +70°C Dice* DG509ABK -20°C to +85°C 16 CERDIP DG509ADJ -40°C to +85°C 16 Plastic DIP DG509ADY -40°C to +85°C 16 Narrow SO DG509AEGE -40°C to +85°C 16 QFN DG509AEWE -40°C to +85°C 16 Wide SO DG509AAK -55°C to +125°C 16 CERDIP *Contact factory for dice specifications. CLOCK IN Q J 1/2MM747C73 Q J 1/2MM747C73 CLOCK Q K N.C. Q K GND CLEAR GND RESET ENABLE DIFFERENTIAL 4-CHANNEL SEQUENTIAL MUX/DEMUX A0 A1 GND 14 13 A2 13 EN A1 14 15 A0 V- 1 12 GND V- 1 12 V+ S1 2 11 V+ S1A 2 11 S1B S2 3 10 S5 S2A 3 10 S2B S3 4 9 S6 S3A 4 9 S3B 5 6 7 8 5 6 7 8 D S8 S7 S4A DA DB S4B DG509 S4 DG508 QFN 8 16 EN 15 TOP VIEW 16 Pin Configurations (continued) QFN _______________________________________________________________________________________ Monolithic CMOS Analog Multiplexers _______________________________________________________________________________________ 9 DG508A/DG509A Chip Topographies Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) 32L QFN.EPS DG508A/DG509A Monolithic CMOS Analog Multiplexers PACKAGE OUTLINE, 16,20,28,32L QFN, 5x5x0.90 MM 1 21-0091 10 ______________________________________________________________________________________ I 2 Monolithic CMOS Analog Multiplexers PACKAGE OUTLINE, 16,20,28,32L QFN, 5x5x0.90 MM 2 21-0091 I 2 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11 © 2001 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. DG508A/DG509A Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.)