MAX134EQH+TD

Evaluation Kit Available Design Resources Tools and Models Support Click here to ask an associate for production status of specific part numbers. MAX133/134 3¾ Digit DMM Circuit Ordering Information PART MAX133CPL+ MAX133CQH+D MAX133C/D MAX133EPL+ MAX133CMH+D MAX133CMH+TD MAX134CPL+ MAX134CQH+D MAX134C/D MAX134EPL+ MAX134CMH+D MAX134CMH+TD Typical Operating Circuit TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C 0°C to +70°C 0°C to +70°C PACKAGE 40 Lead Plastic DIP 44 Lead Plastic Chip Carrier Dice 40 Lead Plastic DIP 44 MQFP 44 MQFP 40 Lead Plastic DIP 44 Lead Plastic Chip Carrier Dice 40 Lead Plastic DIP 44 MQFP 44 MQFP Pin Configuration 19-0575; Rev 1; 3/20 ©  2020 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2020 Analog Devices, Inc. All rights reserved. MAX133/134 3¾ Digit DMM Circuit Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.analog.com Analog Devices │  2 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  3 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  4 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  5 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  6 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  7 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  8 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  9 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  10 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  11 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  12 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  13 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  14 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  15 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  16 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  17 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  18 MAX133/134 AD0 (LSB) AD1 AD2 AD3 (MSB) 1 44 43 42 41 40 3 2 6 5 4 BUFFERED CLOCK OUT/(A2) ALE/(A1) TOP VIEW CHIP SELECT/(A0) DGND WRITE NC READ 3¾ Digit DMM Circuit + V+ 7 39 BUFFER 2 OUT OSC1 8 38 BUFFER 1 OUT OSC2 9 37 CURRENT IN END OF CONV 10 36 OHMS SOURCE BEEPER 11 35 FILTER RESISTOR IN NC 12 34 NC 33 V- IN OUT 14 32 EXT AC IN INT IN 15 31 EXT AC OUT FILTER AMP IN 16 30 400MV IN 29 VREF IN MAX133 MAX134 IN LO 13 27 28 20 21 22 23 24 25 26 101KΩ 10KΩ 1KΩ NC (DGND OUT) COMMOM FILTER RESISTOR OUT NC NC NC 18 19 17 10MΩ 1.11MΩ FILTER AMP OUT 44 MQFP www.analog.com Analog Devices │  19 MAX133/134 www.analog.com 3¾ Digit DMM Circuit Analog Devices │  20 MAX133/134 3¾ Digit DMM Circuit Package Information PLCC.EPS For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. e A A1 A2 A3 B B1 C e D D1 D3 N MILLIMETERS INCHES MIN MAX MIN MAX 0.165 0.180 4.20 4.57 3.04 0.090 0.120 2.29 3.96 0.145 0.156 3.69 0.51 --0.020 --0.53 0.013 0.021 0.33 0.81 0.026 0.032 0.66 0.28 0.009 0.011 0.23 1.27 0.050 D3 D1 D A A2 A1 B1 B A3 D2 C D D1 D2 D3 MILLIMETERS INCHES MIN MAX MIN MAX N 0.385 0.395 9.78 10.03 20 AA 0.350 0.356 8.89 9.04 0.290 0.330 7.37 8.38 5.08 REF 0.200 REF D 0.485 D1 0.450 D2 0.390 D3 0.300 0.495 0.456 0.430 REF 12.32 11.43 9.91 7.62 12.57 28 AB 11.58 10.92 REF D 0.685 D1 0.650 D2 0.590 D3 0.500 0.695 0.656 0.630 REF 17.40 16.51 14.99 12.70 17.65 44 AC 16.66 16.00 REF D 0.785 D1 0.750 D2 0.690 D3 0.600 0.795 19.94 0.756 19.05 0.730 17.53 REF 15.24 20.19 19.20 18.54 REF 52 AD D 0.985 D1 0.950 D2 0.890 D3 0.800 0.995 25.02 0.958 24.13 0.930 22.61 REF 20.32 25.27 24.33 23.62 REF 68 AE NOTES: 1. D1 DOES NOT INCLUDE MOLD FLASH. 2. MOLD FLASH OR PROTRUSIONS NOT TO EXCEED .20mm (.008") PER SIDE. 3. LEADS TO BE COPLANAR WITHIN .10mm. 4. CONTROLLING DIMENSION: MILLIMETER 5. MEETS JEDEC MO047-XX AS SHOWN IN TABLE. 6. N = NUMBER OF PINS. www.analog.com PROPRIETARY INFORMATION TITLE: FAMILY PACKAGE OUTLINE: 20L, 28L, 44L, 52L, 68L PLCC APPROVAL DOCUMENT CONTROL NO. 21-0049 REV. D 1 1 Analog Devices │  21 MAX133/134 3¾ Digit DMM Circuit Package Information (continued) For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. www.analog.com Analog Devices │  22 MAX133/134 3¾ Digit DMM Circuit Revision History REVISION NUMBER REVISION DATE 1 3/20 DESCRIPTION Updated Ordering Information table and added MQFP Pin Configuration PAGES CHANGED 1, 19 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use.Specifications subject to change without notice. No license is granted by implicationor otherwise under any patent or patent rights of Analog Devices. Trademarks andregistered trademarks are the property of their respective owners. w w w . a n a l o g . c o m Analog Devices │  23