19-1540; Rev 0; 11/07
MAX16031 Evaluation Kit
The MAX16031 evaluation kit (EV kit) provides a proven
printed-circuit board (PCB) layout that facilitates evaluation of the MAX16031 EEPROM-based system monitor
with nonvolatile fault memory. This EV kit is a fully
assembled and tested surface-mount board.
The EV kit includes an on-board USB-to-JTAG and I2C
interface facilitating communications between the host
PC and the MAX16031. A DAC connected to the monitoring inputs and the status LEDs connected to each
programmable output make it easy to evaluate the various monitoring functions of the MAX16031.
This EV kit data sheet assumes basic familiarity with the
MAX16031. Refer to the MAX16031/MAX16032 IC data
sheet for more detailed information.
Features
♦ USB Interface to Host PC
♦ Easy-to-Use GUI Software
♦ Facilitates Programming of MAX16031s on
Prototype Boards
♦ LEDs Indicate Each Output’s State
♦ On-Board DAC Simulates Monitored Voltages
♦ Convenient Test Points and Headers for Easy
Evaluation
♦ Fully Assembled and Tested
Ordering Information
PART
TYPE
MAX16031EVKIT+
+Denotes lead-free and RoHS-compliant.
EV Kit
Component List
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
2
2.2µF ±20%, 10V X5R ceramic
capacitors (0805)
TDK C2012X5R1A225M
Taiyo Yuden LMK212BJ225MG
1
33pF ±5%, 50V C0G ceramic
capacitor (0603)
TDK C1608C0G1H330J
Taiyo Yuden UMK107CG330JZ
5
1μF ±10%, 10V X5R ceramic
capacitors (0805)
TDK C2012X5R1A105K
KEMET C0805C105K4PAC
C3, C5, C6
3
0.1μF ±10%, 25V X7R ceramic
capacitors (0805)
TDK C2012X7R1E104K
Taiyo Yuden TMK212B104KT
C114
C7
0
Not installed, capacitor (0805)
EXT PWR
1
Test point, red
0.1μF ±10%, 25V X7R ceramic
capacitors (0603)
TDK C1608X7R1E104K
Taiyo Yuden TMK107BJ104KA
F100
1
500mA fast-acting fuse (2405)
C1, C2, C4,
C100, C108
C101, C102,
C103
C104, C105,
C106, C107
C110
C111
3
4
1
1
18pF ±5%, 50V C0G ceramic
capacitors (0603)
TDK C1608C0G1H180J
Taiyo Yuden UMK107CG180JZ
4.7μF ±20%, 6.3V X5R ceramic
capacitor (0805)
TDK C2012X5R0J475M
Taiyo Yuden JMK212BJ475MG
0.01μF ±10%, 50V X7R ceramic
capacitor (0603)
TDK C1608X7R1H103K
Taiyo Yuden UMK107B103KZ
C112, C113
GND, REF
2
Test points, black
J1, J2, J4
3
3-pin headers
J3
1
2-pin header
J100
1
2 x 3-pin header
LED1–LED7,
LED100–LED103
11
Green LEDs (1206)
P100
1
USB_B right-angle connector
P101, P102
0
Not installed
P1
1
5-pin header
P2
1
2 x 5-pin header
P3
1
11-pin header
P4
1
9-pin header
P5
1
4-pin header
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Evaluates: MAX16031
General Description
Evaluates: MAX16031
MAX16031 Evaluation Kit
Component List (continued)
DESIGNATION
QTY
DESCRIPTION
Q1, Q2
2
npn bipolar transistors
Fairchild MMBT3904
Diodes Inc. MMBT3904-7-F
R1–R7,
R100–R103
11
221 ±1% resistors (0805)
DESIGNATION
QTY
DESCRIPTION
U100
1
Maxim dual, low-noise, lowdropout linear regulator
MAX8882EUTAQ+ (6-pin SOT23)
U101
1
Maxim USB peripheral controller
MAX3420EECJ+ (32-pin LQFP)
U102
1
Maxim microcontroller
MAXQ2000-RAX+ (68-pin QFN-EP*)
Y100
1
12MHz crystal (HCM49)
Citizen HCM49-12.000MABJ-UT
R8–R14, R104
8
10k ±1% resistors (0805)
R23, R112
0
Not installed, resistors
R105, R106
2
33.2 ±1% resistors (0805)
R108, R109, R110
3
4.75k ±1% resistors (0805)
S1, S2, S3
3
8-row DIP switches
Y101
0
Not installed, 32kHz crystal
1
Maxim EEPROM-based system
monitor
MAX16031ETM+ (48-pin TQFN)
Y102
1
20MHz crystal (HCM49)
Citizen HCM49-20.000MABJ-UT
—
5
Shunts
U2
1
Maxim octal 12-bit voltage-output
DAC with serial interface
MAX5306EUE+ (16-pin TSSOP)
—
1
USB high-speed A-to-B cable,
5ft (1.5m)
1
PCB: MAX16031 Evaluation Kit+
1
Maxim precision, low-dropout,
micropower voltage reference
MAX6025AEUR+ (3-pin SOT23)
—
U3
U1
*EP = Exposed paddle.
Component Suppliers
SUPPLIER
PHONE
WEBSITE
Diodes, Inc.
805-446-4800
www.diodes.com
Fairchild Semiconductor
888-522-5372
www.fairchildsemi.com
KEMET Corp.
864-963-6300
www.kemet.com
Taiyo Yuden
800-348-2496
www.t-yuden.com
TDK Corp.
847-390-4373
www.component.tdk.com
Note: Indicate that you are using the MAX16031 when contacting these component suppliers.
Quick Start
Required Equipment
2) Connect the MAX16031 EV kit to a PC using the
USB cable provided with the EV kit. LED100 will
light indicating that the EV kit has power.
Before beginning, the following equipment is needed:
3) Install the EV kit software.
•
MAX16031 EV kit (includes USB cable)
4) Launch MAX16031.exe.
•
A user-supplied PC with a spare USB port
5) Click the I2C radio button in the Connect dialog
box, and make sure Address is 0x18. Press the OK
button.
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software.
Procedure
The MAX16031 EV kit is fully assembled and tested.
Follow the steps below to verify board operation:
1) Make sure jumpers J1 and J2 are in the 0 position, J3
is closed, J100 is in the 3.3V position, and J4 is in the
1-2 position. Also ensure that all switches in switch
banks S1, S2, and S3 are all in the ON position.
2
6) Click the number 0.00 next to DAC Voltage for IN1.
7) In the Set Input Voltage dialog box, enter 1.00 and
press the OK button.
8) Note that the voltage in the chart-recorder view
increases to 1V.
_______________________________________________________________________________________
MAX16031 Evaluation Kit
Evaluates: MAX16031
Detailed Description of Software
Connecting to the MAX16031 EV Kit
Make sure the EV kit is connected to the PC by the USB
cable. Launch the software and in the Connect dialog
(Figure 1), select the I2C or JTAG radio button and
click OK. If the software is being used without the EV kit
connected, select the Demo (No Hardware Required)
radio button.
The I2C slave address may be specified. The default is
0x18, but other values (depending on the settings of
jumpers J1 and J2) can be used.
Voltages Tab
The Voltages tab (Figure 2) provides a visual indication
of the voltage present on every IN_ input. Each channel
has a settings dialog (accessed by clicking the underlined IN_ link), a DAC output voltage setting, settings
for each overvoltage and undervoltage threshold, two
fault flags, and a chart-recorder view.
Figure 1. Connect Dialog
Figure 2. Voltages Tab
_______________________________________________________________________________________
3
MAX16031 Evaluation Kit
Evaluates: MAX16031
Each IN_ input can be connected to the on-board
MAX5306 DAC using switch bank S1. This allows the
voltage at the IN_ input to be manually controlled through
the EV kit software. Click the link next to DAC Voltage to
set the voltage of the DAC in the 0 to 2.5V range. The
DAC voltage can also be changed by dragging the dotted green line, shown in the chart-recorder view.
To set the primary or secondary overvoltage or undervoltage thresholds for a particular channel, click the
appropriate underlined number next to that parameter.
The primary thresholds can also be modified by dragging the dotted red lines in the chart-recorder view. The
secondary thresholds can be changed the same way;
both appear as dotted yellow lines.
Two fault flag indicators are associated with each channel. The upper one corresponds to the primary fault
thresholds; the lower one corresponds with the secondary fault thresholds. If an undervoltage or overvoltage fault occurs, one or both these indicators will turn
red and remain so even after the original fault condition
is removed. To clear a fault indicator, click the indicator
and select Clear Fault or Clear All Faults on the menu
that appears.
Figure 3. Settings Dialog
The Settings dialog (Figure 3) can set the IN input-voltage range to one of three settings: 1.4V, 2.8V, and
5.6V. To enable channel monitoring, make sure the
Enable Fault Detection checkbox is selected. The
Disable Interrupts and Outputs for group box allows
faults on the primary or secondary thresholds to be
“masked,” which prevents them from triggering an
SMBus™ interrupt or asserting a fault output. The Save
State to EEPROM on group box selects which type of
fault can trigger a nonvolatile fault save operation.
Each chart-recorder view shows the voltage on the corresponding IN_ input with a solid green line. To zoom in
and zoom out, click the magnifying glass icons in the
upper right of the chart-recorder view. Another way to
zoom in and out is to click and “drag” a selection rectangle. Drag from upper left to lower right to zoom in,
and from lower right to upper left to zoom out.
Two IN inputs can be paired to form a combined differential input. Click any of the Single Ended links in the
center of the window to pair two inputs together, or to
separate two paired inputs.
SMBus is a trademark of Intel Corp.
4
_______________________________________________________________________________________
MAX16031 Evaluation Kit
the settings dialog. To enable channel monitoring,
make sure Enable Fault Detection is selected (Figure
5). The Disable Interrupts and Outputs for group box
allows faults on the primary or secondary thresholds to
be “masked,” which prevents them from triggering an
SMBus interrupt or asserting a fault output. The Save
State to EEPROM on group box controls whether a
fault can trigger a nonvolatile fault save operation.
Figure 4. Current and Temperature Tab
_______________________________________________________________________________________
5
Evaluates: MAX16031
Current and Temperature Tab
The Current and Temperature tab (Figure 4) provides
a set of chart-recorder views similar to the Voltages
tab. To select the display units for the temperature sensors, click the appropriate setting of the Temperature
Display radio buttons.
Similar to the input channels on the Voltages tab, the
current and the temperature channels each have a settings dialog. Click the title of each channel to display
MAX16031 Evaluation Kit
Evaluates: MAX16031
Each external temperature channel has some additional
items on the settings dialog, shown in Figure 5.
Additional fault mask bits are provided for the diodeshort and diode-open faults, and two controls are provided to set the temperature offset and gain calibration
parameters. The value provided for gain controls the
current (in µA) of the internal high-current source, while
the offset controls the digital offset value added to the
temperature conversion result (in Celsius).
Output Control Tab
The Output Control tab (Figure 6) facilitates configuration of the programmable outputs.
The MAX16031 has several programmable outputs:
FAULT1, FAULT2, OVERT, RESET, GPIO1, and GPIO2.
The FAULT1 and FAULT2 outputs can be configured to
depend on many combinations of fault conditions for all
voltage, current, and temperature channels that are not
masked. The OVERT output depends on combinations
of temperature-related faults. Finally, the RESET output
depends on a combination of fault conditions for both
voltage and temperature and for a programmable set of
voltage inputs. The RESET output also has a programmable timeout, which is the amount of time RESET
remains asserted after all fault conditions are cleared.
GPIO1 and GPIO2 can be used as general-purpose
inputs or outputs (GPIOs), and can also be configured
to act as manual reset inputs or additional fault outputs.
When a GPIO is configured as a fault output, the following fault conditions can be monitored:
•
Primary undervoltage and overvoltage for one
selectable voltage channel
•
One or more of the following: primary overvoltage
for all voltage inputs, secondary over/undervoltage
for all inputs, overtemperature for each sensor, or
secondary overcurrent
•
Both of the above options at once
Figure 5. Temperature Settings Dialog
6
_______________________________________________________________________________________
MAX16031 Evaluation Kit
Evaluates: MAX16031
Figure 6. Output Control Tab
Miscellaneous Tab
Many other configuration options are available in the
Miscellaneous tab (Figure 7): the boot-up delay, the
temperature filter, overcurrent settings, deglitch settings, fault settings, memory lock bits, and the SMBus
alert configuration.
The After-boot timeout setting controls the time delay
from when power is applied, to when monitoring is
enabled. This can prevent a partially powered system
from triggering false fault signals during startup.
The Temp sense filter time constant provides the
ability to filter the temperature sensors to reduce noise.
Overcurrent settings include OC timeout, which controls the amount of time a secondary overcurrent condition must be present before it triggers a fault, and OC
output pin, which controls whether the OVERC output
latches an overcurrent fault or follows the state of the
primary overcurrent comparator.
Filtering of the voltage-monitoring channels is controlled by the Hysteresis of all thresholds setting,
which sets the voltage difference between the rising
and falling voltage threshold of each fault comparator.
Require 2 faults in a row, when turned on, prevents
any voltage fault from occurring unless the fault condition is present for two complete ADC conversion cycles
in a row.
_______________________________________________________________________________________
7
Evaluates: MAX16031
MAX16031 Evaluation Kit
The On major fault setting controls what information is
saved to the fault EEPROM during a fault condition.
Save only fault flags means that only the fault flags
are stored to EEPROM during a fault event; Save fault
flags and ADC means that both the fault flags and the
ADC readings for all channels are stored to EEPROM
during a fault event.
Version code provides user access to register 5Eh.
This register does not control any function of the chip,
but can be used to store user-defined data such as a
version number.
The registers and the configuration EEPROM can be
locked with the Configuration setting to prevent unintentional modification of configuration settings. The lock
icon in the lower-left corner of the window also indicates and controls this lock bit.
The fault EEPROM is locked automatically when a fault
condition occurs and must be unlocked before any
subsequent fault will get stored to EEPROM. Unlock it
using the ADC-related EEPROM lock setting.
To enable full SMBus functionality and allow the
SMBALERT output to assert, the SMBALERT# Signal
option must be enabled.
Figure 7. Miscellaneous Tab
8
_______________________________________________________________________________________
MAX16031 Evaluation Kit
Most configuration registers have a matching EEPROM
location that is copied to the register when the
MAX16031 powers up. The Registers tab places each
pair on the same row. After experimenting with a particular register configuration, that configuration can be
written to the EEPROM by clicking the Commit
Configuration to EEPROM button.
Figure 8. Registers Tab
_______________________________________________________________________________________
9
Evaluates: MAX16031
Registers Tab
Besides the easy-to-use GUI controls, the MAX16031
can also be configured by directly modifying the registers and EEPROM. The Registers tab (Figure 8) provides access to the registers and EEPROM. Modify a
register by clicking the cell under the Value column,
entering the new value, and pressing Enter or clicking
in another cell.
Evaluates: MAX16031
MAX16031 Evaluation Kit
About
This menu item launches the About dialog, which displays the software version, whether the EV kit is connected, and the firmware revision of the USB interface.
Menu Reference
System
Connect... directs the software to open a connection
with a connected EV kit and brings up the Connect
dialog (Figure 1) to select the connection type. Once
connected, this menu item changes to Disconnect.
Save as SVF… writes the EEPROM configuration to an
SVF file, which is a standard format used by JTAG
device programmers for production programming.
Save Configuration… and Load Configuration…
save and load the register and EEPROM configuration
to a text file.
SMBus Alert Functionality
When the SMBALERT# signal is enabled using the
option in the Miscellaneous tab, any fault that occurs
will cause this signal to be asserted. When that happens, the status bar displays SMBALERT# detected.
Click here to send Alert Response Address. Clicking
the status bar item then causes the EV kit hardware to
issue an Alert Response Address command, which
returns the slave address of the SMBus device that triggered the SMBus alert.
Polling
On and Off turn register polling on and off. When
polling is on, the controls in all the tabs are periodically
refreshed from the physical registers. If polling is off,
register content can be read from the device by selecting Read All Registers.
EXTERNAL POWER
SUPPLY
(OPTIONAL)
EXT
PWR
GND
Detailed Description of Hardware
The MAX16031 monitors eight voltages, three temperatures, and one current. Seven configurable outputs
indicate fault-status information. Figure 9 provides an
overview of the major features of the EV kit PCB.
CONNECTED
LED100
USB
ACTIVITY
POWER
LED103
LED102
LED101
J100
CURRENT-SENSE
RESISTOR
(OPTIONAL)
VCC SELECT
EEPROM
R23
S1
S3
J3
P2
JTAG
I2C
P1
PULLUP
VOLTAGE
SELECT
CURRENT-SENSE
BIAS
P3
S2
MONITORED INPUTS
Q2
J1
OUTPUT
STATUS
INDICATORS
1-800-737-7600
P5
TEMPERATURE-SENSOR CONNECTIONS
WWW.MAXIM-IC.COM
MAX16031 EVALUATION KIT+
I2C ADDRESS SELECT
Figure 9. Evaluation Kit PCB Diagram
10
OUTPUTS
Q1
J2
TEMPERATURE
SENSORS
CONFIGURES
JTAG AND I2C
BUS ROUTING
P4
MAX16031
J4
LED1–LED7
CONNECTS DAC
OUTPUTS TO
MONITORING
INPUTS
______________________________________________________________________________________
MAX16031 Evaluation Kit
Voltage Monitoring
The eight voltage monitoring inputs connect to pins on
P3 located on the left side of the board. Switch bank S1
allows each input to be connected to the output of a
DAC, which allows the voltage to be set using the EV kit
software for ease of evaluation. The DAC output voltage
range is limited to 2.5V. Do not attempt to force an
external voltage while the DAC is connected; doing so
could damage the DAC or the external voltage source.
To facilitate prototype development and programming,
the host interface can be used to interface with a
MAX16031 on another board by turning off switches
1-7 in switch bank S2. This disconnects the on-board
MAX16031 from the JTAG and I2C buses. Connect to
the other board using P1 and P2. The pinout of each
connector is shown in Tables 2 and 3. Note that the I2C
pullup resistors are located on the EV kit.
The on-board MAX16031 can be connected to an
external JTAG or I2C interface by turning switch bank
S3 (switches 1-7) off while keeping switch bank S2
(switches 1-7) on. Connect the external interface to P2
for JTAG or P1 for I2C. The MAX16031 can be completely disconnected from the on-board USB host interface by using this technique, while providing external
power to EXT PWR (J100 must be in the EXT position),
and disconnecting the on-board DACs by turning off all
the switches in switch bank S1.
Each interface can be disconnected or connected separately. I2C uses switches 1-3 on both S2 and S3 while
JTAG uses switches 4-7 on both S2 and S3.
Power Source
The MAX16031 IC can be powered from one of three
possible power supplies, controlled by jumper J100. To
power directly from the USB 5V supply, place the
jumper in the 5V position. To power from the on-board
3.3V regulator, place the jumper in the 3.3V position.
When the jumper is in the EXT position, the MAX16031
can be powered from an external power supply connected to the EXT PWR test point. Do not supply a voltage higher than 14V.
Serial Interfaces
The MAX16031 has both a JTAG interface and an I2C
serial interface. The slave address of the on-board
MAX16031 can be set using J1 and J2, according to
Table 4.
Current Monitoring
The current-sense inputs are connected to pins on
header P3 and can be used in two ways. A small voltage source can be applied directly across CS+ and
CS-, which the MAX16031 will measure directly. For this
situation, J3 must be closed, which connects CS+ to
VCC to ensure proper bias. As an alternative, a currentsense resistor can be soldered in the R23 position and
CS+ and CS- can be connected in series with the
external circuit to be measured.
If an external bias voltage is to be used, remove J3 and
connect the CS+ pin of P3 to the external source. Do
not supply a bias voltage higher than 28V. The currentsense circuit in the MAX16031 will not function for bias
voltages less than 3V.
Temperature Monitoring
One of the temperature sensors is internal and the
other two are external. Both external temperature sensors are included on the EV kit as Q1 and Q2, which
are diode-connected 2N3904 transistors. These can be
desoldered and replaced if necessary. The connections are easily accessible through header P5.
Inputs and Outputs
Each output has a separate indicator LED and pullup
resistor, and each signal is brought out to a pin on P4.
An LED will light to indicate that the associated output
has gone to the logic-low state. The LEDs can be disabled by turning off switch 8 in switch bank S2. The
pullup resistors are controlled by J4. To use an external
pullup voltage, connect J4 in the 2-3 position and connect the voltage source to the VPU pin of P4.
GPIO1 and GPIO2 can also function as inputs. If they
are configured as such, connect the external input to
the GPIO1 or GPIO2 pin of P4.
A test point (REF) is provided to confirm the reference
voltage of the MAX16031, which is 1.4V (nominal). Do
not connect loads to this test point.
______________________________________________________________________________________
11
Evaluates: MAX16031
USB-Host Interface
The MAX16031 EV kit includes a built-in USB-toJTAG/I 2 C host interface. The host interface uses
Maxim’s MAX3420 USB peripheral controller, along
with a MAXQ2000 microcontroller to communicate with
the host PC and generate the I2C/JTAG bus signals.
Three indicators (LED101, LED102, LED103) provide
status information of the host interface. LED101 lights
during EEPROM write operations, LED102 lights during
I2C or JTAG bus activity, and LED103 lights when the
software is communicating to the EV kit.
Evaluates: MAX16031
MAX16031 Evaluation Kit
Jumper Function Tables
Table 1. Jumper Function Table (J100, J3, J4, S1, S2, S3)
JUMPER
J100
J3
J4
S1
POSITION
FUNCTION
5V*
MAX16031 powered from 5V USB power
3.3V
MAX16031 powered from 3.3V regulator
EXT
MAX16031 powered from EXT PWR test point
Open
Closed*
Current-sense amplifier biased externally (CS+ test point)
Current-sense amplifier biased from MAX16031 VCC
1-2*
Output pullup resistors connected to 3.3V
2-3
Output pullup resistors connected to VPU test point
1
Connects IN1 to DAC channel 1 when closed
2
Connects IN2 to DAC channel 2 when closed
3
Connects IN3 to DAC channel 3 when closed
4
Connects IN4 to DAC channel 4 when closed
5
Connects IN5 to DAC channel 5 when closed
6
Connects IN6 to DAC channel 6 when closed
7
Connects IN7 to DAC channel 7 when closed
8
Connects IN8 to DAC channel 8 when closed
1
2
Connects P1 (I2C) to on-board MAX16031 when closed
3
S2
4
5
6
Connects P2 (JTAG) to on-board MAX16031 when closed
7
8
Enables output LEDs when closed
1
2
Connects I2C bus of host interface to P1 when closed
3
S3
4
5
6
Connects JTAG bus of host interface to P2 when closed
7
8
Not used
*Default position.
12
______________________________________________________________________________________
MAX16031 Evaluation Kit
PIN
FUNCTION
1
3.3V (output only)
2
SDA
3
Ground
4
SCL
5
SMBALERT#
Table 3. JTAG Connector Pinout (P2)
PIN
FUNCTION
1
TCK
2
Ground
3
TDO
4
3.3V (output only)
5
TMS
6
—
7
— (Key)
8
—
9
TDI
10
Ground
Table 4. Jumper Function Table (J1, J2)
J1 SHUNT
POSITION
(A1)
J2 SHUNT
POSITION
(A0)
0*
0*
0011_000 (18h)
0
Z
0011_001 (19h)
0011_010 (1Ah)
I2C SLAVE
ADDRESS
0
1
Z
0
0101_001 (29h)
Z
Z
0101_010 (2Ah)
Z
1
0101_011 (2Bh)
1
0
1001_100 (4Ch)
1
Z
1001_111 (4Fh)
1
1
1001_110 (4Eh)
*Default position.
______________________________________________________________________________________
13
Evaluates: MAX16031
Table 2. I2C Connector Pinout (P1)
14
1
2
3
4
5
6
7
8
9
10
11
LDAC
CS
DCLK
DIN
CON11
P3
16
1
2
15
3
1 CS2 CS+
3
4
5
6
7
8
9
10
11
1
1
2
2
3
3
4
4
CON4
P5
+3.3
U2
VDD
C5
0.1μF
13
GND
REF
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
S1
SW DIP-8
J3
CSBIAS
VCC
MAX5306
CS
SCLK
DIN
DOUT
LDAC
14
R23
RES1
Q1
MMBT3904
4
5
6
7
8
9
10
11
12
C7
NP
2
OUT
U3
3
GND
48
1
2
3
9
10
11
12
43
44
45
46
IN
1
C1
1μF
CS- 41
CS+ 42
MAX6025
9 10 11 12 13 14 15 16
8 7 6 5 4 3 2 1
Q2
MMBT3904
38
VCC VCC
37
MAX16031
U1
DBP
34
VBP
16
RBP
36
ABP
C4
1μF
+3.3
4
C6
0.1μF
5
6
7
30
8
13
35
31
32
39
A1
40
A1
J1
47
VBP
TMS
TCK
TDI
TDO
ALERT
SDA
SCL
A0
A1
GPIO1
GPIO2
OVERT
OVERC
FAULT1
FAULT2
RESET
REF
C3
0.1μF
N.C. N.C. N.C. N.C. N.C. GND GND GND N.C. N.C. N.C. N.C. N.C.
CSCS+
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN8
DXN2
DXP2
DXN1
DXP1
C2
1μF
VCC
A0
J2
27
28
29
33
A0
21
17
18
19 A0
20 A1
14
15
22
23
24
25
26
LED1
R1
221Ω
1%
1
2
3
4
5
6
7
8
S2
LED3
16
15
14
13
12
11
10
9
R3
221Ω
1%
EXT SEL
LED2
R2
221Ω
1%
LED4
R4
221Ω
1%
LED6
R6
221Ω
1%
P1
I2C
LED7
R7
221Ω
1%
+3.3
5 4 3 2 1
LED5
R5
221Ω
1%
R8
10kΩ
1%
1
3
5
7
9
2
4
6
8
10
JTAG
P2
R9
10kΩ
1%
R10
10kΩ
1%
1
R11
10kΩ
1%
1
2
3
4
5
6
7
8
PC SEL
S3
R12
10kΩ
1%
J4 3 VPUSEL
2
+3.3
+3.3
16
15
14
13
12
11
10
9
R13
10kΩ
1%
R14
10kΩ
1%
P4
CON9
9
8
7
6
5
4
3
2
1
ALERT
SDA
SCL
TMS
TCK
TDI
TDO
9
8
7
6
5
4
3
2
1
Evaluates: MAX16031
MAX16031 Evaluation Kit
Figure 10. MAX16031 EV Kit Schematic
______________________________________________________________________________________
MAX16031 Evaluation Kit
Evaluates: MAX16031
+3.3
D+
GND
3
4
R106
33.2Ω
1%
USB_B
21
29
30
31
32
1
2
7
8
D-
D+
GPIN0
GPIN1
GPIN2
GPIN3
GPOUT0
GPOUT1
GPOUT2
GPOUT3
3 4
R112
OPEN
23 22
+2.5
17
14
13
12
11
10
INT
MOSI
MISO
SS
SCLK
RES
MAX8882
Y100
12MHz
26
27
XI
XO
MAX3420E
U100
15
GPX
U101
C104
18pF
VBUS
VCC
VCC
20
24
VL
VL
28
VBCOMP
R105
33.2Ω
1%
R104
10kΩ
N.C.
F100
P100 500mA
1
VBUS
2
D-
C101
0.1μF
USBINT
MOSI
MISO
SS
SCLK
RES
C114
33pF
N.C.
GND
GND
GND
GND
N.C.
N.C.
C100
VBUS 1μF
5
4
C110
4.7μF
C105
18pF
OUTA
OUTB
BP
IN
SHDN
GND
6
1
3
+3.3
C113
2.2μF
C112
2.2μF
C111
0.01μF
R100
221Ω
LED100
2
+3.3 VBUS
+2.5
1
3
5
+3.3
EXT PWR
9 18 19 5 6 16 25
VCC
J100
2
4
6
C108
1μF
VCC SEL
C102
0.1μF
GND
C103
0.1μF
RST Q
+3.3
R101
221Ω
1%
LED102
LED
R102
221Ω
1%
LED103
LED
R103
221Ω
1%
CS
LDAC
P101
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
EX1
EX2
EX3
EX4
EX5
EX6
RESET
VDDIO
VDD
U102
MAXQ2000-RAX
TEST
22 23 24 25 26
28 42
34
Y101
32kHz
35
51
Y102
20MHz
HFXOUT
LED101
LED
SEG0/P0.0
SEG1/P0.1
SEG2/P0.2
SEG3/P0.3
SEG4/P0.4/INT0
SEG5/P0.5/INT1
SEG6/P0.6/INT2
SEG7/P0.7/INT3
SEG8/P1.0
SEG9/P1.1
SEG10/P1.2
SEG11/P1.3
SEG12/P1.4
SEG13/P1.5
SEG14/P1.6
SEG15/P1.7
SEG16/P2.0
SEG17/P2.1
SEG18/P2.2
SEG19/P2.3
SEG20/P2.4
SEG21/P2.5
SEG22/P2.6
SEG23/P2.7
SEG24/P3.0
SEG25/P3.1
HFXIN
ALERT
SCL
SDA
58
59
60
61
62
63
64
65
66
67
68
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
33
32KOUT
TMS
TCK
TDI
TDO
R110
4.75kΩ
1%
27
32KIN
R109
4.75kΩ
1%
49
GND
GND
R108
4.75kΩ
1%
SEG32
SEG33/COM3
SEG34/COM2
SEG35/COM1
COM0
+3.3
VADJ
VLCD2
VLCD1
VLCD
57 56 55 54
P7.1/RX0/INT15
P7.0/TX0/INT14
P6.5/T0/WKOUT1
P6.4/T0B/WKOUT0
P6.3/T2/OW_IN
P6.2/T2B/OW_OUT
P6.1/T1/INT13
P6.0/T1B/INT12
P5.7/MISO
P5.6/SCLK
P5.5/MOSI
P5.4/SS
P5.3/TX1/INT11
P5.2/RX1/INT10
P4.3/TDO
P4.2/TMS
P4.1/TDI/INT9
P4.0/TCK/INT8
SEG31/P3.7/INT7
SEG30/P3.6/INT6
SEG29/P3.5/INT5
SEG28/P3.4/INT4
SEG27/P3.3
SEG26/P3.2
53
52
48
47
46
45
44
43
RX0
TX0
41
40
39
38
37
36
32
31
30
29
21
20
19
18
17
16
MISO
SCLK
MOSI
SS
DIN
DCLK
RES
USBINT
TDO Q
TMS Q
TDI Q
TCK Q
EX6
EX5
EX4
EX3
EX2
EX1
+3.3
P102
C106
50 18pF
C107
18pF
TCK Q
TDO Q
TMS Q
TDI Q
1
3
5
7
9
2
4
6
8
10
RST Q
JTAG_MAXQ
Figure 11. MAX16031 EV Kit Schematic—USB Interface
______________________________________________________________________________________
15
Evaluates: MAX16031
MAX16031 Evaluation Kit
Figure 12. MAX16031 EV Kit Component Placement Guide—Component Side
16
______________________________________________________________________________________
MAX16031 Evaluation Kit
Evaluates: MAX16031
Figure 13. MAX16031 EV Kit PCB Layout—Component Side
______________________________________________________________________________________
17
Evaluates: MAX16031
MAX16031 Evaluation Kit
Figure 14. MAX16031 EV Kit PCB Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
18 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2007 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.