1. 物料型号:MAX2206和MAX2208是宽带功率检测器,用于CDMA系统。
2. 器件简介:这些IC设计用于准确检测发射机输出功率,以确保系统正常运行和最大容量,特别是在基于CDMA的系统中。
3. 引脚分配:文档中没有提供具体的引脚分配图,但提到了MAX2206和MAX2208的封装是2 x 2的0.5mm间距超小型封装(UCSP)。
4. 参数特性:
- MAX2206具有40dB的动态范围,从-25dBm到+15dBm。
- MAX2208具有25dB的动态范围,从-10dBm到+15dBm,且功耗更低。
5. 功能详解:
- MAX2208内置了一个滤波器,适用于CDMA调制信号的平均功率检测。
- MAX2206没有内置滤波器,需要外部滤波器以准确检测信号。
6. 应用信息:
- 文档讨论了CDMA应用中功率检测器的输出电压纹波噪声问题,并提供了减少纹波噪声的方法。
7. 封装信息:两种功率检测器都采用UCSP封装,节省空间。
8. 性能数据:文档提供了在836MHz和1880MHz频率下,MAX2206和MAX2208的性能数据,包括输出电压和纹波噪声。
9. 选择指南:根据检测的功率范围和电路板空间要求,文档提供了选择MAX2206或MAX2208的指导。
10. 测量数据:基于少于500µs的响应时间和低于50mVP-P的纹波噪声设计参数,文档展示了MAX2208和MAX2206的测量数据。
11. 技术支持和样本获取:文档最后提供了Maxim Integrated Products公司的技术支持、样本获取和联系方式。